La Crosse Technology WS-9119U Bedienungsanleitung

Hanging hole

Battery

compartment

LCD Display

Function Keys

Removable Stand

WS-9119U

INTELLIGENT WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of excellent design and innovative

measuring technique. Featuring radio controlled time, date, calendar, weather forecast, moon phase, indoor and

outdoor temperature and humidity, air pressure and various alarm settings for different weather conditions, this weather

station will never keep you guessing on current and future weather conditions. Operation of this product is simple and

straightforward. By reading this operating manual, the user will however receive a better understanding of the Intelligent

Weather Station together with the optimum benefit of all its features.

FEATURES:

The Intelligent Weather Station

•WWVB Radio-controlled time with manual setting option

•WWVB reception ON/OFF (user selectable)

•12/24 hour time display

•Time zone option ±12 hours

•Calendar display (weekday, date, month, year)

•Time alarm settings

•12 Moon phases display throughout the year

•Weather forecasting with 4 weather icons and weather tendency indicator

•Temperature display in °F/ºC

•Humidity display as RH%

•Indoor temperature and humidity display with MIN/MAX and time/date of recording

•Indoor comfort indicator

•Low/High indoor temperature alarm

•Low/High indoor humidity alarm

•Outdoor temperature and humidity display with MIN/MAX and time/date of recording

•Low/High outdoor temperature alarm

•Low/High outdoor humidity alarm

•Relative air pressure unit in hPa, inHg, or mmHg

•Air pressure tendency indicator for last 36h (bar graph format)

•Low pressure alarm

•“Intelligent” weather information display

•Can receive up to 3 transmitters

Weather

information text

•LCD contrast selectable

•Low battery indicator

•EL back-light

•Display in 3 languages selectable: English, German and French

•Wall mounting or table standing

The Remote Temperature/Humidity Sensor

•Remote transmission of outdoor temperature and humidity to weather station by 433 MHz

signal

•Weather resistant casing

•Wall mounting case

•Mounting at a sheltered place. Avoid direct rain and sunshine

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1. Have the intelligent weather station and remote temperature/humidity sensor 3 to 5 feet

apart.

2. Batteries should be out of both the intelligent weather station and remote

temperature/humidity sensor units for 10 minutes.

3. Place the batteries into the remote temperature/humidity sensor first then into the

intelligent weather station.

4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the intelligent weather station and remote temperature/humidity sensor will start to talk to

each other and the display will show the intelligent temperature/humidity, outdoor temperature/humidity,

heat index and dew point. If the intelligent weather station does not display all information after the 15

minutes please retry the set up as stated above. After all information has been displayed for 15 minutes

you can place your sensors outdoors and set your time.

Important Notes on Set-up and Operation

•The remote temperature/humidity sensor should be placed in a dry, shaded area.

•Fog and mist will not harm your remote temperature/humidity sensor but direct rain must be

avoided.

•The remote temperature/humidity sensor has a range of 330 feet. Any walls that the signal will have

to pass through will reduce distance. An outdoor wall or window can have up to 30 feet of

resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance

should not exceed 330 ft. in a straight line.

•The remote temperature/humidity sensor transmits a signal every minute. After the batteries have

been installed, the intelligent weather station will search for the signal for a duration of 4 minutes. If

there is no temperature or humidity reading in the OUTDOOR LCD after 4 minutes, make sure the

units are within range of each other, or repeat the battery installation procedure.

•If a button is pressed before the intelligent weather station receives the signal from the remote

temperature/humidity sensor, you will need to follow the battery installation procedure again.

To complete the set up of your new wireless weather station after the 15 minutes have passed please

follow the steps that follow in the Detailed Set-Up Guide.

HOW TO INSTALL AND REPLACE BATTERIES IN THE INTELLIGENT WEATHER STATION

The intelligent weather station uses 3 AA (alkaline recommended) batteries. When the batteries need to be replaced the

low battery symbol will appear on the LCD.

To install and replace the batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the

battery compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see battery compartment

marking).

3. Replace battery cover.

HOW TO INSTALL AND REPLACE BATTERIES IN THE REMOTE TEMPERATURE/HUMIDITY

SENSOR

The remote temperature/humidity sensor uses 2 x AA IEC LR6, 1.5V batteries. To install and replace

the batteries, please follow the steps below:

1. Remove the battery cover at the front side with a small screwdriver.

2. Insert the batteries, observing the correct polarity (see battery compartment marking).

3. Replace the battery cover on the unit.

Note:

When changing the batteries in any of the units, all units need to be reset by following the setting up procedures. This is

because the transmitter at start-up assigns a random security code and this code must be received and stored by the

intelligent weather station in the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to an authorized

facility.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is

located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout the United States

at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna in the Weather Station.

However, due to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The weather

station will search for a signal every night when reception is best. The WWVB radio station derives its signal from the

NIST Atomic clock in Boulder, Colorado. A team of atomic physicists is continually measuring every second, of every

day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard,

measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more information on the

atomic clock and WWVB please see the NIST website at http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.

LM STOP ke

FUNCTION KEYS:

Intelligent Weather Station:

The intelligent weather station has 6 easy to use function keys on the bottom front and 1 key on the top front.

SET key

•Press and hold the key to enter manual setting modes: LCD contrast, 12/24 hour time display, time zone, manual

time setting, calendar, WWVB ON/OFF, ºF/ºC temperature unit, pressure unit, relative pressure setting and

language display

•Alarm time set inside alarm time setting mode

•Confirm key inside weather alarm setting mode

•Reset individual MIN/MAX temperature/humidity record

•Combine with the CH key to re-detect a new transmitter in displayed channel

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light ON

CH key (Channel key)

•Select channel 1, 2, or 3 (if more than 1 transmitter is used)

•Exit setting mode

•Re-detect new transmitters signal for all channels

•Combined with the set key to re-detect a new transmitter in displayed channel

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light on

MAX/+ key

•Display MAX indoor and outdoor temperature and humidity records with time of recording

•Activate/deactivate the time alarm

•Increase the alarm time (hour and minutes)

•Increase all values in manual setting modes

•Activate/deactivate the weather alarm

•Increase the weather alarm values

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light on

•Reset all MIN/MAX records

MIN/- key

•Display MIN indoor and outdoor temperature and humidity records with time of recording

•Activate/deactivate the time alarm

•Decrease the alarm time (hour and minutes)

•Decrease all values in manual setting modes

•Activate/deactivate the weather alarm

•Decrease the weather alarm values

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light on

•Reset all MIN/MAX records

LM TIME ke

SET key

MAX/+ key CH key

MIN/- key

DATA

key

ir pressure history

bar graph

ALM TIME key

•Enter the alarm time setting mode

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light on

ALM Data key

•Enter the weather alarm time setting mode

•Stop the alarm during the time alarm or weather alarm ringing

•Set next weather alarm in weather alarm setting mode

•Back-light on

•Read out alarm data info on text display after weather alarm occurred

ALM STOP key

•Stop the alarm during the time alarm or weather alarm ringing

•Back-light on

•Disable the weather alarm sound

LCD SCREEN

The LCD screen is split into 8 sections displaying the information for time and date, moon phase, indoor data, weather

forecast, air pressure, air pressure history, outdoor data, “intelligent” weather information display.

Outdoor temperature

in °F or ºC

Indoor general alarm icon

Seconds display

Indoor relative

humidity in RH%

ir pressure

tendency indicator

Indoor Temperature

in °F or ºC

Outdoor transmitter

identification number

Calendar display

WWVB reception icon

(for WWVB time)

Moon icon/Moon phases

icon/ Star icons

Weather forecast icon

Weather tendency

indicator

Outdoor signal

rece

tion indicato

Relative air pressure

display in hPa, inHg,

or mmH

Intelligent weather

display information in

English, German or

French

Indoor comfort

indicator

Outdoor general

alarm icon

Time display

Time alarm icon

Outdoor relative

humidity in RH%

MANUAL SETTINGS:

The following manual settings can be changed when pressing and holding the SET key for approximately 4 seconds:

•LCD contrast setting

•12/24 hour time display

•Time zone setting

•Manual time setting

•Calendar setting

•WWVB time reception ON/OFF setting

•°F/°C temperature unit setting

•Air pressure unit setting

•Relative pressure value setting

•Language display setting

LCD CONTRAST SETTING

The LCD contrast can be set within 8 levels, from LCD 1 to LCD8 (default setting is LCD 5):

1. Press and hold the SET key for around 4 seconds until the digit start flashing.

2. Use the MAX/+ or MIN/- key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and enter in the 12/24 Time Display setting.

12/24 HOUR TIME DISPLAY SETTING:

The time display can be set to view time as 12/24-hour format. The default time display mode is “12h”. To set to “24h”

time display:

1. Use the MAX/+ or MIN/- key to toggle the value.

2. Confirm with the SET key and enter the Time Zone setting.

TIME ZONE SETTING

The time zone can be set ±12 hour. The default time zone is set to Eastern Time zone (“EST”). To set a different time

zone:

1. The current time zone value starts flashing.

2. Use the MAX/+ or MIN/- key to set the time zone. The MAX/+ key increases the value and the MIN/- key

decreases the value in consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Manual Time setting.

MANUAL TIME SETTING:

In case the intelligent weather station cannot detect the WWVB-signal (for example due to disturbances, transmitting

distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

1. The hour digit will start flashing.

2. Use the MAX/+ or MIN/- key to set the hour.

Last digit flashing

Digit flashing

Minutes

flashing

Hour flashing

Digit flashing

Year

Date Month

3. Press again the SET key to switch to the minutes. The minute digits start flashing.

4. Use the MAX/+ or MIN/- key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try to receive the signal between 2:00 and 6:00 am every day despite it being manually set, if the

WWVB reception function has been set ON. When it does receive the signal, it will change the manually set time into

the received time. During reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then

the WWVB tower icon will not appear but reception will still be attempted the following hour.

CALENDAR SETTING:

The date default of the intelligent weather station is 1. 1. in the year 2004. Once the radio-controlled time signals are

received, the date is automatically updated. However, if the signals are not received, the date can also be set manually.

1. The year starts flashing.

2. Use the MAX/+ or MIN/- key to set the year. The range runs from 2004 to 2030.

3. Press the SET key again to confirm and to enter the month setting. The month starts flashing.

4. Use the MAX/+ or MIN/- key to set the month.

5. Press the SET key again to confirm and to enter the date setting mode. The date starts flashing.

6. Use the MAX/+ or MIN/- key to set the date.

7. Confirm all calendar settings with the SET key and enter the WWVB Time Reception ON/OFF setting.

WWVB TIME RECEPTION ON/OFF SETTING

In area where reception of the WWVB time is not possible, the WWVB time reception function can be turned OFF. The

clock will then work as a normal Quartz clock. (Default setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the MAX/+ or MIN/- key to turn OFF the time reception function.

3. Confirm with the SET key and enter the ºF/ºC Temperature Unit setting.

Note:

If the WWVB time reception function is turned OFF manually, the clock will not perform any reception of the

WWVB time as long as the WWVB OFF function is activated.

The WWVB reception icon will not be displayed on the LCD.

°F/°C TEMPERATURE UNIT SETTING

The temperature display can be selected to show temperature data in °F or °C. (default °F)

1. Use the MAX/+ or MIN/- key to toggle between “°F” or “°C”.

2. Confirm with the SET key and enter the Air Pressure Unit setting.

Flashing

Note:

Date, Month, Year (for 24h display)

Month, Date, Year (for 12h display)

Digit flashing

RELATIVE AIR PRESSURE UNIT SETTING

The relative air pressure unit can be set in inHg, hPa or mmHg unit. (default unit is inHg).

1. Use the MAX/+ or MIN/- key to toggle between “inHg”, “hPa” or “mmHg”

2. Confirm with the SET key and enter the Relative Pressure Value setting.

Note:

The default reference pressure value of the barometer is 29.91 inHg (1013 hPa). For an exact measurement it is

necessary to first adjust the barometer to your local relative air pressure (related to elevation above sea level).

Ask for the present atmospheric pressure of your home area (Local weather service, calibrated instruments in public

buildings, airport).

RELATIVE PRESSURE VALUE SETTING

The default relative pressure value is 29.91 inHg (1013 hPa). This corresponds to the average air pressure. Pressure

below this is referred to as low-pressure area (weather to become worse), pressure above as high-pressure area

(weather to improve). The relative air pressure can be manually set to another value within the range of 28.35 to 30.72

inHg (960 – 1040 hPa or 720 – 781 mmHg) for a better reference.

1. The current relative pressure value will start flashing

2. Use the MAX/+ or MIN/- key to increase or decrease the value. Keep holding the key allows the value to advance

faster.

3. Confirm with the SET key and enter the Language display setting.

Note:

This calibration facility is useful for those users living at various elevations above sea level, but wanting their air

pressure display based on sea level elevation.

LANGUAGE DISPLAY SETTING:

The language for the calendar and “Intelligent” weather information display can be set to view in English (E), German

(D), or French (F). Default setting is English. To set another language:

1. Use the MAX/+ or MIN/- key to set the desired language.

2. Confirm with the SET key and exit the Manual settings.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting anytime during the manual setting modes, press the CH key anytime or wait for automatic

timeout. The mode will return to normal time display.

Flashing

Time alarm icon

TIME ALARM SETTING

The alarm time can be set when pressing the ALM TIME key.

1. Press and hold the ALM TIME key until the “ALARM” digits are shown and flash. Use the MAX/+ or MIN/- key to

set the alarm ON/OFF. The time alarm icon “ “ is shown to indicate that the alarm is ON.

2. Press the SET key to enter the alarm time set mode. The hour digit start flashing

3. Press the MAX/+ or MIN/- key to set the hour.

4. Press the SET key to switch to the minutes. The minute digits start flashing.

5. Use the MAX/+ or MIN/- key to set the alarm minutes.

6. Confirm with the SET key and exit the Time Alarm setting or wait for automatic timeout.

Note: The maximum alarm ring duration is 2 minutes.

To stop the alarm, press any key during alarm ringing.

WEATHER ALARM SETTING

The intelligent weather station can be set to alert when a specific weather condition is reach.

The following Weather Alarm settings can be changed when pressing and holding the ALM DATA key for

approximately 4 seconds:

•LOW indoor temperature alarm

•HIGH indoor temperature alarm

•LOW outdoor temperature alarm

•HIGH outdoor temperature alarm

•LOW indoor humidity alarm

•HIGH indoor humidity alarm

•LOW outdoor humidity alarm

•HIGH outdoor humidity alarm

•LOW air pressure alarm

Default alarm values:

Temperature Low 32ºF

High 86ºF

Humidity Low 20%

High 90%

Air pressure Low 29.52

inHg

LOW INDOOR TEMPERATURE ALARM SETTING

Note:

After pressing the ALM DATA key within the LOW indoor temperature alarm setting there are the following individual

sub-settings.

To set the LOW indoor temperature alarm (default OFF):

I. Buzzer ON/OFF (alarm sounding):

1. Press the ALM STOP key to set buzzer ON/OFF. The “ “ icon will appear if the buzzer alarm is ON. No

acoustic alarm signal will be heard when the weather alarm is trigged if buzzer is set OFF.

II. Set the alarm ON/OFF:

1. Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.

III. Set the alarm value (default 32ºF)

1. Press the SET key to enter the alarm value setting (alarm value flashing)

larm time

2. Use the MAX/+ or MIN/- key to set the alarm value.

3. Press the SET key to confirm and enter the HIGH indoor temperature alarm setting.

IV. If no LOW indoor temperature setting is needed, please press the ALM DATA key to enter the HIGH indoor

temperature alarm setting.

HIGH INDOOR TEMPERATURE ALARM SETTING

Note:

Within the HIGH indoor temperature alarm setting there are optional sub-settings, which can be set individually.

To set the HIGH indoor temperature alarm (default OFF):

I. Buzzer ON/OFF (alarm sounding):

1. Press the ALM STOP key to set buzzer ON/OFF. The “ “ icon will appear if the buzzer alarm is ON. No

acoustic alarm signal will be heard when the weather alarm is trigged if buzzer is set OFF.

II. Set the alarm ON/OFF:

1. Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.

III. Set the alarm value (default 86ºF)

1. Press the SET key to enter the alarm value setting (alarm value flashing)

2. Use the MAX/+ or MIN/- key to set the alarm value.

3. Press the SET key to confirm and enter the LOW outdoor temperature alarm setting.

IV. If no HIGH indoor temperature setting is needed, please press the ALM DATA key to enter the LOW outdoor

temperature alarm setting.

LOW OUTDOOR TEMPERATURE ALARM SETTING

Note:

Within the LOW outdoor temperature alarm setting there are optional sub-settings, which can be set individually. Note:

The outdoor temperature alarm can only be set for channel 1 transmitter.

To set the LOW outdoor temperature alarm (default OFF):

I. Buzzer ON/OFF (alarm sounding):

1. Press the ALM STOP key to set buzzer ON/OFF. The “ “ icon will appear if the buzzer alarm is ON. No

acoustic alarm signal will be heard when the weather alarm is trigged if buzzer is set OFF.

II. Set the alarm ON/OFF:

1. Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.

III. Set the alarm value (default 32ºF)

1. Press the SET key to enter the alarm value setting (alarm value flashing)

2. Use the MAX/+ or MIN/- key to set the alarm value.

3. Press the SET key to confirm and enter the HIGH indoor temperature alarm setting.

IV. If no LOW outdoor temperature setting is needed, please press the ALM DATA key to enter the HIGH outdoor

temperature alarm setting.

HIGH OUTDOOR TEMPERATURE ALARM SETTING

Note:

Within the HIGH outdoor temperature alarm setting there are optional sub-settings. Note: The outdoor temperature

alarm can only be set for channel 1 transmitter.

To set the HIGH outdoor temperature alarm (default OFF):

I. Buzzer ON/OFF (alarm sounding):

1. Press the ALM STOP key to set buzzer ON/OFF. The “ “ icon will appear if the buzzer alarm is ON. No

acoustic alarm signal will be heard when the weather alarm is trigged if buzzer is set OFF.

II. Set the alarm ON/OFF:

1. Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-9075TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S77925V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WEATHER DIRECT WD-3103U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-807 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9066U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83349 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-1415 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology 308-1425B Abmessungen

La Crosse Technology

La Crosse Technology V22-WRTHV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9611U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology SW403 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414MB Bedienungsanleitung

La Crosse Technology

La Crosse Technology S74177 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8610 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S81120 Abmessungen

La Crosse Technology

La Crosse Technology 308-146W Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung