La Crosse Technology 308-1415BWV2 Bedienungsanleitung

SET UP GUIDE

MODEL: 308-1415BWv2 / 308-1415BWv3

WIRELESS

TEMPERATURE STATION

Power Up

Outdoor Sensor

TX141-Bv3

or TX141-Bv4

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert 2-AA batteries into your Temperature Station.

3. Once the Outdoor Sensor is reading to your station, place it

outside in a shaded location to protect from the sun’s heat.

Watch the sensor mounting video: bit.ly/th_sensor_mounting

Temperature Station

308-1415BWv2 or

308-1415BWv3

Month/Date or Date/Month Display

In the Settings Menu, choose Month/Date or Date/Month calendar display.

Press the SET button to select between full Weekday or Calendar

(Weekday, Month, Date) display.

Custom Date Display

Button Functions

The buttons are located on the front of your station.

SET Press to view full Weekday or Calendar display.

Hold to enter the Settings Menu.

+ (PLUS)

Press to view HI/LO Records.

Hold to search for outdoor sensor.

Settings Menu: Press to increase value. Hold to increase quickly.

- (MINUS) Settings Menu: Press to decrease value. Hold to decrease quickly.

When viewing HI/LO Records: Hold to delete a record.

ALARM Press to activate/deactivate alarm. Alarm Icon will show when alarm is active.

Hold to enter Alarm Settings.

Settings Menu

1. Hold the SET button to enter the Settings Menu.

2. Use the + / - button to adjust and SET to confirm.

Settings Menu order:

• Language (English, Spanish, French)

• Beep ON/OFF

• 12/24 Hour Time

• Hour

• Minutes

• Year

• Month

• Date

• Month/Date or Date/Month Display (see below)

• Fahrenheit/Celsius

Language: When Español or Francais is selected, the following instructions

and weekday will be presented in that language.

Weekday: Weekday sets automatically when Year, Month and Date are set.

Alarm

Set Alarm

1. Hold the ALARM button to enter settings mode.

2. Press the + / - button to adjust the ﬂashing values.

3. Hold the + / - buttons to adjust quickly.

4. Press the ALARM button to conﬁrm adjustments and move to the next

item or exit

Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2

minute and then shuts o completely.

Deactivate/Activate Alarm

• The alarm is active when set.

• From normal time display, press and release the ALARM button to

deactivate or activate the alarm. The alarm time will show for 2 seconds.

• Alarm Icon and ALARM ON will show then active

• ALARM OFF will show when inactive.

MinutesHour InactiveActive

HI/LO Temperature Records

The HI & LO temperature and humidity readings are recorded with time

and date of occurrence.

To view your HI or LO records, simply press and release the +button.

• Outdoor HI Temperature

• Outdoor LO Temperature

• Indoor HI Temperature

• Indoor LO Temperature

Reset HI or LO Records

• While viewing individual values, hold the -button for 3 seconds to reset

the individual value. Value, time and date stamp will reset to current.

• This is a historical HI/LO temp readings since the weather station was ﬁrst

set up. This comes directly from the weather station.

Low Battery Indicator

1. When Battery Indicator shows next to the Outdoor Temperature,

replace batteries in your Outdoor Sensor.

2. When Battery Indicator shows next to the Indoor Temperature, replace

batteries in your Station.

Search for Outdoor Temperature

If you are seeing dashes for your outdoor readings, please try the

following steps:

1. Hold the +button to search for your outdoor sensor. The Reception

Indicator will begin to animate.

2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside

next to the display and remove power from both the sensor and clock.

3. Press any button on the clock 20 times and leave the parts sit for a few

moments with the power o.

4. Install a new set of alkaline batteries into the sensor, then into your clock.

For additional help visit: bit.ly/basic_restart

5. If your outdoor data is still not appearing after these steps, please

contact our support sta via the links below.

• The Sensor Weather Shield is designed to protect your

outdoor sensor from rain and snow.

• This shield will oer limited protection from the sun’s heat.

• Optional purchase at: bit.ly/925-1418

Sensor Shield (not included)

Stay in Touch

Follow La Crosse Technology on YouTube,

Twitter, Facebook and Instgram.

Ask questions, watch setup videos, and

provide feedback on our social media outlets.

Speciﬁcations

308-1415BWv2 or 308-1415BWv3

Temperature Range: 32°F to 99°F

(0°C to 37°C)

Power: 2-AA batteries sold separately

Battery Life: Over 24 months

Dimensions: 3.24” L x 2.16” W x 5.98” H

(8.23cm L x 5.48cm W x 15.19cm H)

TX141-Bv3 or TX141-Bv4

Outdoor Temperature Range: -40°F to 140°F

(-40°C to 60°C)

Transmission Range: 330 ft (100m) open air,

RF 433MHz

Power: 2-AA batteries sold separately

Battery Life: Over 24 months

Dimensions:

1.57” L x 0.82” W x 5.11” H

(3.98 cm L x 2.08cm W x 12.98cm H)

Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 091021

If you require additional support, get in touch

with our friendly customer support team

based in La Crosse, WI.

Phone: 1.608.782.1610

Online: bit.ly/contact_techsupport

Our knowledgable customer support team is

available: Mon-Fri 8am-6pm CST

We’re Here to Help

This product can expose you to chemicals including

styrene, which is known in the State of California to

cause cancer.

For more information, go to:

www.P65Warnings.ca.gov

WARNING:

Warranty Info

La Crosse Technology, Ltd. provides a 1-year

limited time warranty (from date of purchase) on

this product relating to manufacturing defects in

materials & workmanship.

La Crosse Technology, Ltd,

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit:

www.lacrossetechnology.com/pages/warranty

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Caution!

Any changes or modiﬁcations not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

in any form, even in part, or duplicated or processed using

electronic, mechanical or chemical process without the

written permission of the publisher.

This booklet may contain errors or misprints. The information

it contains is regularly checked and corrections are included

in subsequent editions. We disclaim any responsibility for

any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

FCC Statment

Battery Replacement Instructions

When batteries of dierent brand or type are used together,

or new and old batteries are used together, some batteries

may be over-discharged due to a dierence of voltage or

capacity. This can result in venting, leakage, and rupture and

may cause personal injury.

•Always purchase the correct size and grade of battery

most suitable for the intended use.

•Always replace the whole set of batteries at one time,

taking care not to mix old and new ones, or batteries of

dierent types.

•Clean the battery contacts and also those of the device

prior to battery installation.

•Ensure the batteries are installed correctly with regard to

polarity (+ and -).

•Remove batteries from product during periods of non-use.

Battery leakage can cause corrosion and damage to this

product.

•Remove used batteries promptly.

•For recycling and disposal of batteries, and to protect the

environment, please check the internet or your local phone

directory for local recycling centers and/or follow local

government regulations.

Care & Maintenance

Andere Handbücher für 308-1415BWV2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-7032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9014TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8157U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3510 Benutzerhandbuch

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6862 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9009-IT Betriebsanleitung

La Crosse Technology

La Crosse Technology 308-145 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1611T Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86234 Abmessungen

La Crosse Technology

La Crosse Technology T83646v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S77925 Abmessungen

La Crosse Technology

La Crosse Technology 308-1416v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7015 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7026U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-807 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-2513U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425BV3 Abmessungen

La Crosse Technology

La Crosse Technology C87030 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung