La Crosse Technology Wireless Weather Station Bedienungsanleitung

Foldable stands

LCD

Display

Function

keys

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of innovative

design and uality piece of engineering. Providing radio controlled time, date, calendar, Moon

phase, indoor and outdoor temperature, indoor and outdoor relative humidity, and air pressure

history information. This unit will never keep you guessing on current and future weather

conditions. Operation of this product is simple and straightforward. By reading this operating

manual, the user will receive a better understanding of the Weather Station together with the

optimum benefit of all its features.

FEATURES:

The Weather Station

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

• Weekday and day calendar display (year and month only in setting mode)

• Alarm setting with snooze function

• Display 12 Moon phases throughout the year

Battery

compartment

Hanging hole

« Instant Transmission » is the up and coming state-of-the-art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT ” offers you an immediate update of all your outdoor data measured from the

transmitters: follow your climatic variations in real-time!

• Weather forecasting with weather tendency indicator

• Indoor comfort indicator

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and time of reception

• Humidity data display as RH%

• Indoor and outdoor humidity display with MIN/MAX records

• Relative air pressure hPa/ inHg with adjustable reference value

• Weather icon sensitivity setting

• Relative air pressure history for the past 24 hours (electronic barometer with barometric

pressure trend)

• LCD contrast selectable

• Can receive up to 3 outdoor transmitters

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• Low battery indicator

• Table standing or wall mounting

Thermo-Hygro Transmitter

• Remote transmission of outdoor temperature and humidity to weather

station by 868 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries.

To install and replace the batteries, please follow the steps

below:

1. Insert finger or other solid object in the space at the

bottom center of the battery compartment and lift up to

remove the cover.

2. Insert batteries observing the correct polarity (see

marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO

TRANSMITTER

The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6, 1.5V batteries. To install

and replace the batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery cover.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is due to a random security code assigned by the

transmitter at start-up. This code must be received and stored by the Weather Station in the first 3

minutes of power being supplied to the transmitter.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum

accuracy of these units.

Please participate in the preservation of the environment. Return used batteries

to an authorized depot.

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the

Termo-hygro outdoor transmitter” above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the Temperature

Station (see “How to install and replace batteries in the Weather Station” above). Once

the batteries are in place, all segments of the LCD will light up briefly and a short signal tone

will sound. Following the indoor temperature/humidity and the time as 0:00 will be displayed.

If these information are not displayed on the LCD after 60 seconds, remove the batteries and

wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user

may proceed to the next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from the

transmitter. The outdoor temperature and humidity data should then be displayed on the

Weather station. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance between the

Weather Station and the transmitter should not be more than 100 meters (see notes on

“Positioning” and “868 MHz Reception”).

Note:

In the event of changing batteries of the units, ensure the batteries do not spring free from the

contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise

start up and transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60

seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather

Station. Once the batteries are in place, all segments of the LCD will light up briefly and a

short signal tine will sound. Following the indoor temperature/humidity and the time as 0:00

will be displayed. If these information are not displayed on the LCD after 60 seconds, remove

the batteries from both units and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then

be displayed on the Weather Station. Also, the signal reception icon will be displayed. If this

does not happen after 2 minutes, the batteries will need to be removed from both units and

reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor temperature and

humidity readings from the first transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the

Weather Station displays the information of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon

should then be displayed on the Weather Station. If this does not happen after 2 minutes, the

batteries will need to be removed from all the units and reset from step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data

are displayed on the Weather Station. Then within 2 minutes, the channel 3 outdoor data

from the third transmitter will be displayed and the channel icon will shift back to "1" once the

third transmitter is successfully received. If this is not happen, user shall restart the setting up

from step 1.

Note : User shall insert the batteries into the third transmitter within 45 seconds after the

Weather Station displays the information of the first transmitter. Or immediately after

reception of the second transmitter is finished.

8. In order to ensure sufficient 868 MHz transmission however, the distance between the

Weather Station and the transmitter should not be more than 100 meters (see notes on

“Positioning” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described

above. Should transmission problems occur, it is necessary to remove the batteries from all units

and start again the set-up from step 1.

RESETTING

The Weather Station and the Thermo-hygro transmitter need to be reset when one of the following

conditions occur:

•

Unsuccessful 868 MHz signal reception.

•

Malfunction on the units.

•

Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute before powering up the

Weather station again. Proceed from step 1 in “Setting Up”.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch

Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in

one million years. The time is coded and transmitted from Mainflingen near Frankfurt via

fre uency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your

radio-controlled Weather Station receives this signal and converts it to show the precise time in

summer or wintertime.

The uality of the reception depends greatly on the geographic location. In normal cases, there

should be no reception problems within a 1500km radius of Frankfurt.

DCF reception occurs twice daily at 02:00 and 03:00 am. If the reception is not successful at 03:00

am, then the next reception takes place the next hour and so on until 06:00am, or until the

reception is successful. If the reception is not successful at 06:00 am, then the next attempt will

take place the next day at 02:00 am.

Once the outdoor data reception test period is completed, the DCF tower icon in the clock display

will start flashing in the upper left corner. This indicates that the clock has detected that there is a

radio signal present and is trying to receive it. When the time code is received, the DCF tower

becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then

please take note of the following:

• Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 1.5 - 2 meters.

• Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/ or point its front or

back towards the Frankfurt transmitter.

• During nighttime, the atmospheric disturbances are usually less severe and reception is

possible in most cases. A single daily reception is ade uate to keep the accuracy deviation

below 1 second.

IN key OUT/+ key

ALM/DATE key

SET key

SNOOZE/CH key

FUNCTION KEYS:

Weather Station:

The Weather Station has 6 easy to use function keys:

SET key

• Press and hold the key to enter manual setting modes: LCD contrast, time zone, time

reception ON/OFF, 12/24 hour display, manual time setting, calendar, temperature °C/°F,

pressure hPa/inHg, relative pressure value, and weather icon sensitivity setting

• Reset all MIN/MAX records

• Stop the alarm during alarm ringing

• Stop snooze mode

ALM/DATE key

• Press and hold key for 3 seconds to enter the alarm setting mode

• Active/de-active the alarm time

• Stop the alarm during alarm ringing

• Stop snooze mode

• Display date

IN key

• Press to toggle between MAX/MIN and current indoor temperature/humidity data

• Press to set the alarm hour (inside alarm setting mode)

• Decrease relative pressure value (within manual set mode)

• Stop the alarm during alarm ringing

• Stop snooze mode

OUT/ key

• Press shortly to toggle between MAX/MIN and current outdoor temperature/humidity data

• Increase, change, toggle all values in manual set mode

• Press to set the alarm minute (inside alarm setting mode)

• Stop the alarm during alarm ringing

• Stop snooze mode

SNOOZE/CH key (left and right side)

• Active snooze function during alarm ringing

• Exit the manual set mode and alarm setting mode

• Switch among display of channels (if more than 1 transmitter is used)

LCD SCREEN

The LCD screen is split into 4 sections displaying the information for time/calendar/alarm/moon

phase, indoor data, weather forecast and outdoor data.

* When the signal is successfully received by the Weather Station, the outdoor transmission icon

will be switched on. (If not successful, the icon will not be shown on LCD). The user can then easily

see whether the last reception was successful (icon on) or not (icon off). On the other hand, the

short blinking of the icon shows that a reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET key for:

• LCD contrast setting

• Time zone setting

• Time reception ON/OFF setting

• 12/24-hour format setting

• Manual time setting

• Calendar setting

• °C/°F temperature setting

• hPa / inHg pressure setting

• Relative air pressure setting

• Weather forecasting icon sensitivity setting

LCD CONTRAST SETTING:

Last digit flashing

Moon phase icon

Weather tendency

indicator

Time

Calendar or alarm time

Indoor relative

humidity in RH%

Time reception icon

(for DCF time)

Indoor temperature

in ºC/ ºF

Weather forecast icon

Outdoor data signal

reception indicator*

Outdoor temperature

in ºC/ ºF Outdoor relative

humidity in RH%

Comfort indicator icon

Relative air pressure

history bar graph

Relative air pressure

in hPa / inHg

Low battery indicator

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):

1. Press and hold the SET key until the digit starts flashing.

2. Use the OUT/+ key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone

setting.

TIME ZONE SETTING:

The time zone default of the Weather Station is “0”. To set a different time zone:

1. The current time zone value starts flashing.

2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and then runs from

+12 back to 0 in consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Time reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

In area where reception of the DCF time is not possible, the DCF time reception function can be

turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the OUT/+ key to turn OFF the time reception function.

3. Confirm with the SET key and enter the 12/24-hour format setting.

Note:

If the Time Reception function is turn OFF manually, the clock will not attempt any

reception of the DCF time as long as the Time Reception OFF function is activated.

The time reception icon and the “DCF” icon will not be displayed on the LCD.

12/24-HOUR FORMAT SETTING:

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-Hour)

1. Use the OUT/+ key to toggle between “12H” or “24H”.

2. Confirm with the SET key and enter the Manual time setting.

MANUAL TIME SETTING:

In case the Weather Station cannot detect the DCF-signal (for example due to disturbances,

transmitting distance, etc.), the time can be manually set. The clock will then work as a normal

Quartz clock.

Flashing

Hour flashing

Minutes flashing

Flashing

1. The hour digit will start flashing.

2. Use the OUT/+ key to set the hour.

3. Press again the SET key to set the minutes. The minute digits start flashing.

4. Use the OUT/+ key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try and receive the signal despite it being manually set. When it does receive the

signal, it will change the manually set time into the received time. During reception attempts the

DCF tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not

appear but reception will still be attempted the following day.

CALENDAR SETTING:

The date default of the Weather station is 1. 1. 2006. Once the radio-controlled time signals are

received, the date is automatically updated. However, if the signals are not received, the date can

also be set manually.

1. The year starts flashing.

2. Use the OUT/+ key to set the year (between year 2003-2029).

3. Press the SET key again to confirm and to enter the month setting. The month starts

flashing.

4. Use the OUT/+ key to set the month.

5. Press the SET key again to confirm and to enter the date setting mode. The date starts

flashing.

6. Use the OUT/+ key to set the date.

Confirm all calendar settings with the SET key and enter the Temperature unit setting.

°C/°F TEMPERATURE SETTING:

The temperature display can be selected to show temperature data in °C or °F (Default °C).

1. Use the OUT/+ key to toggle between “°C” or “°F”.

2. Confirm with the SET key and enter the Air pressure unit setting.

hPa / inHg PRESSURE UNIT SETTING:

The pressure display can be selected to show relative air pressure in hPa or inHg ( default is

“hPa”).

1. Use the OUT/+ key to toggle between “hPa” or “inHg” unit

2. Confirm with the SET key and enter the Relative air pressure value setting.

Year

Date and month (24hr time format)

Month and date (12hr time format)

Flashing

Note:

Units of weather icon sensitivity and air pressure history are not affected. They are always

expressed in hPa.

RELATIVE AIR PRESSURE VALUE SETTING

The default relative pressure value is 1013 hPa (29.92 inHg). This can be manually set to another

value within the range of 960 – 1040 hPa (28.35 – 30.72 inHg) for a better reference.

1. The current relative pressure value will start flashing

2. Use the OUT/+ key to increment and IN key to decrement the value. Keep holding the key

allows the value to advance faster.

3. Confirm with the SET key and enter the Weather forecast icon sensitivity setting.

WEATHER FORECASTING ICON SENSITIVITY SETTING:

For locations with rapid changes of weather conditions, the weather icons sensitivity can be set to

a different level for faster display of weather conditions.

1. The current sensitivity value will start flashing.

2. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of setting: 2, 3 and

4. The value corresponds to the change of air pressure in hPa before the weather icon will

switch to another state. Level 2 is the most sensitive setting, level 4 is the slowest recording

setting (default setting is "3").

3. Confirm with the SET key and exit the Manual settings.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting mode anytime during the manual setting, press the SNOOZE/CH key or

wait for automatic timeout. The mode will return to normal time display.

ALARM SETTING:

The alarm time can be set when pressing the ALM/DATE key.

1. Press and hold the ALM/DATE key to enter the alarm set mode. The alarm digits flash.

2. Use the IN key to set the alarm hour.

3. Use the OUT/+ key to set the alarm minute.

Alarm icons

Alarm time

Flashing

4. Confirm with SNOOZE/CH key and exit the Alarm setting. The icon ((●)) will be displayed

along with the set alarm time.

Note:

If the calendar is displayed in the Weather station, the alarm is NOT active.

To view and active the alarm, press the ALM/DATE key. The alarm icon and the alarm time will be

displayed, indicating that the alarm setting is activated.

The maximum alarm ring duration is 2 minutes.

SNOOZE SETTING AND STOPPING THE ALARM:

10 minutes snooze function can be set when the alarm is ringing by pressing the SNOOZE/CH

key.

When the alarm is snoozing, the alarm icon ((•)) will remain flashing indicating that the alarm is

active but is in Snooze mode. To stop the snooze function when it is in snooze period, press any

key except the SNOOZE/CH key.

To stop the alarm, press any key during alarm ringing, except the SNOOZE/CH key.

MOON PHASES SYMBOL

The Moon icon of the Weather station will also display all 12 Moon phases throughout the year

according to the set calendar.

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:

The indoor temperature and humidity data, the indoor comfort indicator are automatically updated

and displayed on the second section of the LCD.

THE COMFORT LEVEL INDICATOR:

Comfortable : A happy face icon “☺” indicating a temperature level between 20°C and

25.9°C and relative humidity reading between 45% and 65%.

Uncomfortable : A sad face icon “” indicating any value outside the comfortable range.

TOGGLING AND RESETTING THE INDOOR READINGS:

1. Press the IN key to toggle between the indoor current, MAX/MIN temperature and humidity

data. The time and dates of the recorded data will also be displayed in the time and calendar

sections (for temperature data only).

Once to show the MAX indoor temperature and humidity data with the recorded time and

date.

Indoor relative

humidity in RH%

Indoor temperature

in °C or ºF

MAX icon

New Moon

Small Waxing

Crescent

Large Waxing

Crescent

First Quarter

Small Waxing

Gibbous

Large

Waxing

Gibbous

Small Waning

Crescent

Large Waning

Crescent

Last Quarter

Small Waning

Gibbous

Large

Wanin

Gibbous

Full Moon

Andere Handbücher für Wireless Weather Station

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-7391UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84060 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S82967 Abmessungen

La Crosse Technology

La Crosse Technology WS6205 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-1415 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1409V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA79103 Abmessungen

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84428 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7090U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 308-145B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Betriebsanleitung

La Crosse Technology

La Crosse Technology WS-7395U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Abmessungen

La Crosse Technology

La Crosse Technology S74177 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7049U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung