La Crosse Technology Wireless Weather Station Bedienungsanleitung

WEATHER STATION

Instruction manual

INTRODUCTION:

Congratulations on purchasing this innovative 868 MHz Weather Station which displays the weather

forecast, time, indoor temperature, relative air pressure and up to three outdoor temperature readings. To

enjoy the full benefits of this innovative product, please read this operating manual.

« Instant Transmission+» is the up and coming state-of-the-art new wireless

transmission technology, exclusively designed and developed by LA CROSSE

TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from

the transmitters: follow your climatic variations in real-time!

LCD

Display

Function

The Weather Station

Battery compartment

Hanging hole

Stand

FEATURES:

•DCF Radio controlled time with manual setting option

•Time reception ON/OFF (user selectable)

•12/24 hour time display

•Time zone option ±12 hours

•Weekday and day calendar display (year and month in setting mode)

•Weather forecasting with weather tendency indicator

•Indoor comfort indicator

•Temperature display in ºC/ºF

•Indoor and outdoor temperature display with MIN/MAX records and time of reception

•Indoor humidity display as RH% with MIN/MAX records

•Relative air pressure hPa/ inHg with adjustable reference value

•

•Weather icon sensitivity setting

Relative air pressure history for the past 12 hours (electronic barometer with barometric pressure

trend)

•LCD contrast selectable

•Can receive up to 3 outdoor temperature transmitters

•Low battery indicator

•Table standing or wall mounting

The Outdoor Temperature Transmitter

•Remote transmission of outdoor temperature to Weather Station by 868 MHz

•Shower proof casing

•Wall mounting case

•Mounting at a sheltered place. Avoid direct rain and sunshine

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please

follow the steps below: 1. Insert finger or other solid object in the space at the bottom c

of the battery compartment and lift up to remove the cover. enter

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The Temperature transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries,

please follow the steps below:1. Remove the battery compartment cover at the back of the outdoor

temperature transmitter.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up

procedures. This is because a random security code is assigned by the transmitter at start-up and this

code must be received and stored by the Weather Station in the first 3 minutes of power being supplied to

it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units

(Battery life See Specifications below).

Please participate in the preservation of the environment. Return used batteries to an

authorized depot.

SETTING UP :

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install and replace batteries in

the Temperature transmitter“).

2. Immediately after and within 45 seconds, insert the batteries into Weather station (see “Install

and replace batteries in the Weather station”). Once the batteries are in place, all segments of

the LCD will light up briefly. Following the time as 0:00 and the indoor temperature and humidity

will be displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at

least 10 seconds before reinserting them.

3. After inserting the batteries, the Weather station will start receiving data from the transmitter. The

outdoor temperature and the signal reception icon should then be displayed on the Weather

station. If this does not happen after 3 minutes, the batteries will need to be removed from both

units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be

a distance no more than 100 meters between the final position of the Weather station and the

transmitter (see notes on “Positioning” and “868 MHz Reception”).

5. Once the remote temperature has been received and displayed on the Weather station, the DCF

time (radio controlled time) code reception is automatically started. This takes typically between 3-

5 minutes in good conditions. If after 10 minutes, the DCF time has not been received, press the

SET key to manually enter a time initially.

When more than one transmitter is used

1. User shall remove all the batteries from the Weather station and transmitters and wait for 60

seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the Weather station.

Once the batteries are in place, all segments of the LCD will light up briefly. Following time as 0:00

and the indoor temp and humidity will be displayed. If they are not shown in LCD after 60 seconds,

remove the batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be displayed on the

Weather station. Also, the signal reception icon will be displayed. If this does not happen after 2

minutes, the batteries will need to be removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature readings from the

first transmitter are displayed on the Weather station.

Note: User shall insert the batteries into the second transmitter within 10 seconds of reception of the first

transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be displayed on

the Weather station. If this does not happen after 2 minute, the batteries will need to be removed

from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor data are

displayed on theWeather station. Then within 2 minutes, the channel 3 outdoor data from the third

transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is

successfully received. If this is not happen, user shall restart the setting up from step 1.

Note:

•User shall insert the batteries into the third transmitter within 10 seconds of reception of the second

transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a

distance no more than 100 meters between the final position of the Weather station and the

transmitter (see notes on “Positioning” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described above.

Should transmission problems occur, it is necessary to remove the batteries from all units and start again

the set-up from step 1.

9. Once the remote temperature has been received and displayed on the Weather station, the DCF

time (radio controlled time) code reception is automatically started. This takes typically between 3-5

minutes in good conditions.

If after 10 minutes, the DCF time has not been received, press the SET key to manually enter a time

initially.

Note:

Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at 03:00 is not successful, then

at 04:00 and 05:00 and 06:00 there are other tries, until one is successful. If the reception at 06:00 is still

not successful, then the next try takes place at 02:00 next day.

If reception is successful, the received time will override the manually set time. The date is also updated

with the received time. (Please refer also to notes on “DCF-77 Radio Controlled time” and “Manual Time

Setting”)

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch

Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one million

years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77

(77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-controlled Weather Station

receives this signal and converts it to show the precise time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases, there should be

no reception problems within a 1500km radius of Frankfurt.

Once the outdoor reception test period is completed, the DCF tower icon in the clock display will start

flashing in the upper center. This indicates that the clock has detected that there is a radio signal present

and is trying to receive it. When the time code is received, the DCF tower becomes permanently lit and the

time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then please

take note of the following:

•Recommended distance to any interfering sources like computer monitors or TV sets is a minimum

of 1.5 - 2 meters.

•Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/ or point its front or back

towards the Frankfurt transmitter.

•During nighttime, the atmospheric disturbances are usually less severe and reception is possible in

most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.

FUNCTION KEYS:

Weather Station:

The Weather Station has 4 easy to use function keys:

IN key

CH key

OUT/+ key

SET key

•Press and hold the key to enter manual setting modes: LCD contrast, time zone, time reception

ON/OFF, 12/24 hour display, manual time setting, calendar, temperature °C/°F, pressure hPa /

inHg, relative pressure value, and weather icon sensitivity setting

•Reset all MIN/MAX records

IN key

•Press to toggle between MAX/MIN and current indoor temperature/humidity data

•Decrease relative pressure value (within manual set mode)

OUT/+ key

•Press shortly to toggle between MAX/MIN and current outdoor temperature data

•Increase, change, toggle all values in manual set mode

CH key

•Exit the manual set mode

•Switch among display of channels (if more than 1 transmitter is used)

Andere Handbücher für Wireless Weather Station

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 308-1711BLV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2811U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88785 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7091UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9121U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7017U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 061317 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9760U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA76669 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1517 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX-440-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3610-CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7391UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX25U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84107V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 512-807 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-7168U Bedienungsanleitung

La Crosse Technology

La Crosse Technology T85647v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 308-1425BV3 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung