La Crosse Technology TX-440-TH Bedienungsanleitung

LONG RANGE WIRELESS COLOR WEATHER STATION Owner’s Manual

Thank you for purchasing the new generation color weather station. Designed and engineered

with the state-of-art technology and components, this instrument will provide accurate and

reliable measurement of barometric pressure, weather forecast, in/ out humidity, temperature,

heat index, dew point as well as atomic clock. Read this manual carefully to fully explore the

features and functions of the new product.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology—Time and Frequency Division)

WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date

signal continuously throughout the United States at 60 kHz. The signal can be received up

to 2,000 miles away through the internal antenna in the Weather Station. However, due to

the nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The

Weather Station will search for a signal every night when reception is best. The WWVB radio

station derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic

physicists is continually measuring every second, of every day, to an accuracy of ten billionths

of a second per day. These physicists have created an international standard, measuring

a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more

information on the atomic clock and WWVB please see the NIST website at

http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.

W177.indd 1 9/15/07 10:21:32 AM

Name and Functions of Buttons:

Press Functions Hold 3 seconds

CLOCK Read time, calendar and day-of-week Set Clock & Calendar

ALARM Read alarm time; enable/disable alarm Alarm time setting

▲ UP 1 step forward in setting Fast advance

▼ Down 1 step backward in setting Fast backward

CHANNEL Select indoor, Channel 1,2,3, auto Search for remote sensor

scroll

MEM Read max/min temperatures & Clear memory record

humidity

HEAT INDEX/ Read Heat Index & Dew Point

DEW POINT

PRESSURE Toggle pressure unit hPa, inHg & mb Altitude setting

SNOOZE/LIGHT Trigger snooze alarm & extend

backlight

ZONE Select the 4 U.S. time zones Enter DST setting mode

F/C Toggle degree F & C unit

Search for atomic time signal

Slide Switch

BACKLIGHT (AUTO/ HIGH / LOW / OFF) Display brightness setting

(*** AUTO mode is recommended to adjust the brightness automatically)

BATTERY & ADAPTER INSTALLATION

Home Receiver Unit:

Main Power Source: Plug in the 6.0V adapter into the adapter socket at the back for basic

operation and continuous backlight.

Backup Power: Lift off the battery cover, install 3 pieces of AAA backup batteries according to

the polarity indicated, close the battery cover.

Remote Sensor:

Loosen the screws on the battery door with a small screwdriver, insert 2 AAA batteries

according to the polarity indicated. Replace the cover and tighten the screws.

W177.indd 2 9/15/07 10:21:36 AM

ALTITUDE SETTING

After inserting batteries or adapter, the main unit will enter altitude setting mode directly.

Press “▲” or “▼” to select pressure unit in hPa, mb or inHg. Press “PRESSURE” to conﬁrm.

Then press “▲” or “▼” to enter your current altitude in meter or feet. Press “PRESSURE”

to conﬁrm and exit the setting. This allows the unit to provide a more accurate barometric

pressure & weather forecast reading. (For more information, see “WEATHER FORECAST &

BAROMETRIC PRESSURE” section)

SETTING UP THE WIRELESS THERMO-HYGROMETER:

• For the ﬁrst installation, always turn on the home unit and then the remote sensor. Set

Channel 1 for the ﬁrst remote sensor. Set channel 2 and channel 3 for the 2nd and 3rd

sensor.

• Press and hold CHANNEL button on main unit until a beep is sound to search for remote

sensor.

• Press the TX button on the back of remote sensor to transmit RF signal.

• When RF connection is established, the respective temperature & humidity of the selected

channel will appear on the main unit.

ATOMIC CLOCK

The unit will start synchronizing the clock after battery/adapter installation or reset. In normal

mode, press “ “ on the back of the display, to enforce searching of atomic clock signal. The

antenna icon will appear during synchronization, if the icon disappears afterwards, atomic

time signal is not available at the moment. Try other locations later. Place the unit away from

source of interference such as mobile phones, appliances, TV etc. Place the front or back of

the unit toward Colorado for best signal reception.

Antenna icon with full signal strength will appear on screen if the reception of atomic time

is successful. The atomic clock will have a daily synchronization at 02:03 and 03:03 everyday.

Each reception cycle is minimum 2.5 minutes and maximum 10 minutes.

WEATHER FORECAST & BAROMETRIC PRESSURE

The unit predicts weather condition of the next 12 – 24 hours based on the change of

atmospheric pressure. Allow 48-60 hours after set up for the unit to acclimate to your

environment. The coverage area is around 18.5 – 31 miles. The weather forecast is based

on atmospheric pressure change and is about 70-75% correct. As weather conditions cannot

be 100% correctly forecasted, we cannot be responsible for any loss caused by an incorrect

forecast.

SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY

The current weather forecast is the one highlighted by a black-outlined square box.

To obtain an accurate weather forecast & barometric pressure reading, you need to input your

current altitude. After the reset of the unit, it will enter altitude setting mode. Press “▲” or “▼”

to set the pressure unit in hPa, mb or inHg. Press “PRESSURE” to conﬁrm. Then enter your

current altitude in meter or feet. Press “PRESSURE” to conﬁrm and exit the setting. You can

also hold “PRESSURE” button to enter altitude setting mode during normal use.

Press PRESSURE button to select pressure unit between hPa, inHg & mb.

W177.indd 3 9/15/07 10:21:37 AM

IN/OUT TEMPERATURE & HUMIDITY

Temperature reading is located on the upper left of the display and humidity is on the right of

the temperature.

Press “F/C“ button to select temperature unit F/C.

Press CHANNEL button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling display

modes.

IN/OUT HEAT INDEX

Heat Index combines the effects of heat and humidity. It is the apparent temperature of how

hot the heat-humidity combination makes it feels.

Press “Heat Index/Dew Point” button once to show the respective indoor or outdoor heat

index on the upper left display. “HEAT INDEX” icon will appear.

HEAT INDEX ALERT INDICATOR

During conditions indicating a high heat index, a Heat Index Alert Indicator will appear on

screen.

Caution Exercise more fatiguing than usual

Extreme caution Heat cramps, exhaustion possible

Danger Heat exhaustion likely

Extreme danger Heat stroke imminent

IN/OUT DEW POINT

Dew point is the saturation point of the air, or the temperature to which the air has to be

cooled in order to get condensation.

In normal mode, press HEAT INDEX / DEW POINT button twice to show the respective indoor

or outdoor dew point reading on the upper left display. “DEW POINT” icon will appear.

IN/OUT COMFORT LEVEL

In/Out Comfort indicator combines the effect of temperature & humidity and displays in 3

levels:

COMF: Comfortable level, ideal range for both temperature & humidity

WET: Contain excess moisture

DRY: Contain inadequate moisture

ANIMATED COLOR GRAPHS

The circular color graphs are designed as an intuitive way to gauge the weather at a glance.

The left color graph represents the respective In/Out temperature, heat index or dew point of

the current display mode. The right graph represents the respective In/Out humidity.

The higher the temperature & humidity, the more color portion of the color graph appears.

Lower temperature & humidity show less color portion of the color graph.

MAXIMUM / MINIMUM MEMORY

Press MEM button repeatedly to view the maximum & minimum values of temperature,

humidity, heat index or dew point readings. To clear the memory record, hold MEM button

while the respective values are displaying on screen.

W177.indd 4 9/15/07 10:21:37 AM

TEMPERATURE & HUMIDITY TREND INDICATOR

The icons (arrow) will indicate Rising, Steady, Falling if the temperature or humidity change is

more than 2 degrees F (or 1 degree C) within an hour.

CLOCK & CALENDAR

Press “CLOCK” to toggle display between time, calendar and day of the week.

Hold “CLOCK “ button to enter clock setting mode. Using “▲”or “▼“ to adjust and “CLOCK” to

conﬁrm, the following values can be set in sequence:

12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > EXIT

U.S. ZONE TIME & DST

Press “ZONE“ button to select U.S. time zone between Paciﬁc “PA”, Mountain “MO”, Central

“CE” and Eastern “EA”.

Hold “ZONE” to enter DST (Daylight Saving Time) setting mode. Press “▲“or “▼“ to enable or

disable the DST setting. Press “ZONE” to conﬁrm and exit.

ALARM SETTING

Press “ALARM” to show alarm time and “AL.” icon will appear. Press again to enable or

disable the alarm. Bell icon “ ” appears when alarm is enabled.

Hold “ALARM” to enter alarm time setting mode. Press “▲”or “ ▼” to enter the desired Hr/

Min values and press “ALARM“ to conﬁrm setting.

SNOOZE & BACKLIGHT

When alarm is going off, press SNOOZE/ LIGHT to trigger snooze alarm and “Zz” icon

will appear. To stop alarm for one day, press “ALARM” key. Press SNOOZE/LIGHT for an

extended backlight if adapter is not connected.

BACKLIGHT BRIGHTNESS CONTROL

Select display brightness mode with the slide switch on the back casing.

• AUTO:

Display brightness is adjusted automatically according to the surrounding brightness

detected by the light sensor located on the left of the Snooze/Light button. In a bright

environment, display brightness will increase. As the environment turns dark, display

brightness will reduce.

(Note: Auto mode is recommended for power saving, display lifetime and convenient

purpose)

(Important: Avoid having obstacle above the light sensor window for an accurate light

sensing result. Otherwise, the display will turn dim even in bright environment)

• High: Turn to high brightness mode

• Low: Turn to low brightness mode

• Off Turn off display backlight

LOW BATTERY INDICATION

Low battery indication is available for the home unit itself and all of the 3 remote channels.

Replace the batteries and follow the setup procedure in this instruction manual.

BATTERY DISPOSAL

Replace only with the same or equivalent type recommended by the manufacturer.

Please dispose of old, defective batteries in an environmentally friendly manner in accordance

with the relevant legislation.

W177.indd 5 9/15/07 10:21:37 AM

SPECIFICATIONS

Indoor Temperature : +32 °F to +122 °F (0 °C to + 50 °C)

In/Out Humidity : 20% - 99% H

Remote sensor : -4 °F to +140 °F (-20 °C to +60 °C)

Channel : max. 3 remote sensors

Transmission : up to 75M (246 ft.) in open area, RF434 MHz

Resolution : 0.1 degree C for temperature, 1% for humidity

Heat Index :

Indoor : 23°F to 122°F (-5°C to 50°C)

Outdoor : -4F to 140°F (-20C to 60°C)

Elevation : -160 ft. to 3,940 ft. (-50M to 1,200M)

Clock : WWVB Atomic Clock, Quartz back-up

Power : 6.0V adapter & AAA x 3 pcs for main unit

AAA x 2 pcs for remote sensor

Trouble shooting for WS 450

Batteries are our #1 warranty issue. Please be sure you are using plain alkaline batteries

dated at least 6 years in advance or reading at least 1.48 on a voltmeter. Be sure that your a/c

cord is properly plugged into the base.

Outdoor Temperature/Humidity

Shows dashes or is inaccurate-

• Check placement of sensor and obstructions such as windows, stucco, metal, trees etc.

• Did sensor get wet? Bring in, remove, batteries allow to dry and try restart.

• The sensor will read the temperature in the location where it is placed. Check for sources

of heat or reﬂected heat. Position your sensor under an eave or window ledge etc. on

North side of home.

• Check the channel button to be sure you are reading the correct sensor.

• Please note the humidity range is 20-99%. Below 20% you may see dashes.

• Check Batteries-and complete a restart.

Adjust to Fahrenheit or Celsius

• On the sensor, remove the battery cover and press the button for F/C

• On the base station press the button for F/C

Restart

• Bring both units inside and have the units at least 5 feet apart with nothing between them.

• Remove all power from both units.

• Press one of the buttons on the display at least 20 times to clear all memory. Verify that

the display is blank before proceeding.

• Let the all units sit with batteries out for 10 minutes.

• Be sure to use a new, Brand Name Alkaline battery dated at least 6 years in advance

(super, ultra, max, heavy duty and rechargeable types should be avoided).

• Plug in a/c cord and/or insert batteries in the display unit, then Insert batteries into the

sensor.

• Press and hold CHANNEL button on display unit until a beep is sound to search for

remote sensor.

• Press the TX button on the back of remote sensor to transmit RF signal.

• When RF connection is established, the respective temperature & humidity of the selected

channel will appear on the main unit.

W177.indd 6 9/15/07 10:21:37 AM

Indoor Temperature readings-

Shows dashes or is missing-

• Please note the humidity range is 20-99%. Below 20% you may see dashes.

• Check A/C connection and Batteries-This is almost always a power issue.

Time and Date information-

Time is not accurate of “jumps” time.

• Be sure your Time Zone is correct.

• Remove scratch guard.

• Has it connected with WWVB? Allow up to 5 nights for this to connect due to atmospheric

interferences.

Date changes at noon rather than midnight

• Time Zone is incorrect.

Weather Station Beeps-

• Alarm is on.

• Low power

• Button is depressed.

Forecast Icons Incorrect

• Set your elevation in the Pressure area.

• Allow 48-60 hours after set up to acclimate to your area.

Display Information

Display is blank

• Check A/C cord and Batteries. Is A/C cord plugged into a live outlet and not one that must

be turned on with a switch.

• Be sure batteries have not leaked

Missing segments-

• Check A/C connection and Batteries

• This is almost always a power issue.

• Complete a restart.

Black spot on LCD

• This is likely due to impact and not a warranty issue.

W177.indd 7 9/15/07 10:21:37 AM

WARRANTY INFORMATION

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against

manufacturing defects in materials and workmanship.

This limited warranty begins on the original date of purchase, is valid only on products

purchased and used in North America and only to the original purchaser of this product. To

receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem

determination and service procedures. Warranty service can only be performed by a La

Crosse Technology, Ltd authorized service center. The original dated bill of sale must be

presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse

Technology, Ltd’s authorized service center.

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge

as stipulated herein, with new or reconditioned parts or products if found to be defective

during the limited warranty period speciﬁed above. All replaced parts and products become

the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology,

Ltd.

Replacement parts and products assume the remaining original warranty, or ninety (90) days,

whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials

for all repairs covered by this warranty. If necessary repairs are not covered by this warranty,

or if a product is examined which is not in need or repair, you will be charged for the repairs or

examination.

The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd

product to a La Crosse Technology, Ltd authorized service center.

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship

with the following speciﬁed exceptions: (1) damage caused by accident, unreasonable use or

neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring

during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of,

any accessory or decorative surface; (4) damage resulting from failure to follow instructions

contained in your owner’s manual; (5) damage resulting from the performance of repairs

or alterations by someone other than an authorized La Crosse Technology, Ltd authorized

service center; (6) units used for other than home use (7) applications and uses that this

product was not intended or (8) the products inability to receive a signal due to any source of

interference.

This warranty covers only actual defects within the product itself, and does not cover the cost

of installation or removal from a ﬁxed installation, normal set-up or adjustments, claims based

on misrepresentation by the seller or performance variations resulting from installation-related

circumstances.

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,

CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE

OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE

USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS

NOT A TOY. KEEP OUT OF CHILDREN’S REACH.

W177.indd 8 9/15/07 10:21:37 AM

This warranty gives you speciﬁc legal rights. You may also have other rights speciﬁc to

your State. Some States do no allow the exclusion of consequential or incidental damages

therefore the above exclusion of limitation may not apply to you.

For warranty work, technical support, or information contact:

La Crosse Technology, Ltd

2809 Losey Blvd S.

La Crosse, WI 54601

Phone: 608.782.1610

Fax: 608.796.1020

e-mail:

support@lacrossetechnology.com

(warranty work)

sales@lacrossetechnology.com

(information on other products)

web:

www.lacrossetechnology.com/450

duplicated or processed using electronic, mechanical or chemical procedures without written

permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this handbook is

regularly checked and corrections made in the next issue. We accept no liability for technical

mistakes or printing errors, or their consequences.

All trademarks and patents are acknowledged.

NOTE:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH

MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT

W177.indd 9 9/15/07 10:21:37 AM

This equipment has been tested and found to comply with the limits for a Class B digital

device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

For Outdoor Temperature and Humidity Sensor:

FCC ID: L5CW044TX-F

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE

HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE

RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FREQ. 433.92 MHz

LA CROSSE TECHNOLOGY

MADE IN CHINA

MODEL: TX-440-TH

Protected under U.S. Patents

5,978,738; 6,076,044; & 6,597,990

W177.indd 10 9/15/07 10:21:37 AM

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9029UITCA Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 302-604B Abmessungen

La Crosse Technology

La Crosse Technology WS-9632U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2800 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 330-2315 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-2316 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9031U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9151U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2308AL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2308 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7213U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-805 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-2310TWC Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-1510-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9002U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85784 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7075UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-2511U Installationsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1516-IT Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung