La Crosse Technology WS-7213U Bedienungsanleitung

WS-7213U

Wireless 433 MHz

Weather Station

Instruction Manual

TABLE OF CONTENTS

Topic Page

Inventory of Contents 3

Additional Equipment 4

Quick Setup 5-8

Detailed Setup Guide

Battery Installation 9-11

Setting the Time 11

Features

Minimum and Maximum

Temperatures 12-13

Resetting Minimum and

Maximum Temperatures 13

Weather Forecast and Weather

Tendency Arrows 14-17

Adding additional remote

temp/humidity sensors

(optional)

17-19

Viewing and operating multiple

remote temp/humidity sensors 19-20

Mounting 21-22

Troubleshooting 23-26

Maintenance and Care 26

Specifications 27-28

Warranty Information 29-31

INVENTORY OF CONTENTS

1. The indoor weather

station (Figure 1)

2. The remote

temperature/humidity

sensor (TX4U) and

mounting bracket.

(Figure 2)

3. Mounting hardware.

4. Instruction Manual

and Warranty Card.

Figure 2

Figure 1

ADDITIONAL EQUIPMENT

(not included)

1. 1 Philips screwdriver.

2. 2 Fresh AA 1.5V batteries.

(for the indoor weather station)

3. 2 Fresh AA 1.5V batteries.

(for the temp/humidity sensor)

QUICK SETUP

Hint: Use good quality Alkaline Batteries

and avoid rechargeable batteries.

1. Have the indoor weather station and

remote temp/humidity sensor 3 to 5 feet

apart.

2. Batteries should be out of all units for

10 minutes.

3. Place the batteries into the remote

temp/humidity sensor first, then into

the indoor weather station.

(All remote temp/humidity sensors

must be started before the indoor

weather station)

4. DO NOT PRESS ANY BUTTONS

FOR 15 MINUTES.

In this time the indoor weather station and

remote temp/humidity sensor will start to

talk to each other and the displays will show

both the indoor temperature and an outdoor

temperature and humidity. If the indoor

weather station do not display both the

indoor temperature and the outdoor

temperature and humidity after the 15

minutes please retry the set up as shown on

page five.

After both indoor temperature and outdoor

temperature and humidity are displayed for

10 minutes you can place your remote

temp/humidity sensor outdoors and set your

time.

Notes on Outdoor Sensor Placement

The remote temp/humidity sensor should be

placed in a dry, shaded area. Fog and mist

will not harm your remote temp/humidity

sensor but direct rain must be avoided.

The remote temp/humidity sensor has a

range of 80 feet. Any walls that the signal

will have to pass through will reduce

distance. An outdoor wall or window can

have up to 30 feet of resistance and an

interior wall can have up to 20 feet of

resistance. Your distance plus resistance

should not exceed 80 ft. in a straight line.

Notes on Weather Station Placement

The 80 ft distance is between each indoor

weather station and the temp/humidity

sensor independently. The placement of one

indoor weather station does not affect the

placement of a second indoor weather

station.

To complete the set up of your indoor

weather station after the 10 minutes have

passed, please follow the steps below.

1. Press and hold the “SET” button for

five seconds.

2. The hour will now be flashing.

a. Press and release the “+”

button until the correct hour

is shown.

Note: There is “PM” displayed to

the left of the hour when between

noon and midnight. During the

AM hours this area will be blank.

b. When the correct hour is

shown, press and release the

“SET” button once.

3. The minutes will now be flashing.

a. Press and release the “+”

button until the correct

minutes are displayed.

Press and release the SET button once

more and you are done.

Battery

compartment

DETAILED SETUP GUIDE

I. BATTERY INSTALLATION

A. REMOTE TEMP/HUMIDITY

SENSOR

1. Remove the mounting bracket.

2. Remove battery cover

3. Observing the correct polarity, install

2 AA batteries—make sure they do not

spring free, or start-up problems may

occur.

4. Replace cover.

Battery cover

B. INDOOR WEATHER STATION

Note: After the batteries are installed, DO

NOT press any buttons for 15 minutes. This

may interfere with the signals, causing

temperatures to register incorrectly.

1. Remove the

battery cover

on the

backside. To

do this, push

up and pull

out.

2. Observing

the correct

polarity,

install 2 AA

batteries.

3. Replace battery cover.

4. Wait 15 minutes or until both the

indoor and outdoor temperatures are

shown on the indoor weather station.

Battery cover

Battery

Compartment

Andere Handbücher für WS-7213U

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2814U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85784 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology C80758-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425BCA Abmessungen

La Crosse Technology

La Crosse Technology CA80550 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790-11 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9006U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3610-CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9020U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C80758 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-2414FR Abmessungen

La Crosse Technology

La Crosse Technology 308-1417BLV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

La Crosse Technology

La Crosse Technology WEATHER DIRECT WA-1242U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7090U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-179ORV2 Abmessungen

La Crosse Technology

La Crosse Technology C85845 Bedienungs- und Wartungshandbuch

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung