La Crosse Technology Wireless Weather Station Bedienungsanleitung

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality

piece of engineering. Providing radio controlled time, date, calendar, Moon phase, indoor and outdoor temperature,

indoor and outdoor relative humidity, and air pressure history information, this unit will never keep you guessing on

current and future weather conditions. Operation of this product is simple and straightforward. By reading this operating

manual, the user will receive a better understanding of the Weather Station together with the optimum benefit of all its

features.

Instant Transmission+» is the up and coming state

the

art new wireless transmission technology,

exclusively designed and developed by LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the transmitters: follow your

climatic variations in real

time!

Stand

LCD Display

Function keys

FEATURES:

The Weather Station

Battery

compartment

Hanging hole

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

• Weekday and daycalendar display (year and month only in setting mode)

• Display 12 Moon phases throughout the year

• Weather forecasting with weather tendency indicator

• Indoor comfort indicator

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and time of reception

• Humidity data display as RH%

• Indoor and outdoor humidity display with MIN/MAX records

• Relative air pressure hPa/ inHg with adjustable reference value

• Weather icon sensitivity setting

• Relative air pressure history for the past 24 hours (electronic barometer with barometric pressure trend)

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• LCD contrast selectable

• Can receive up to 3 outdoor transmitters

• Low battery indicator

• Table standing or wall mounting

The Outdoor Thermo-hygro Transmitter

•

Remote transmission of outdoor temperature and humidity to Weather Station by 868 MHz

•

Display alternately the outdoor temperature and humidity readings on LCD

•

Shower proof casing

•

Wall mounting case (Mounting at a sheltered place. Avoid direct rain and sunshine)

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x AA, IEC LR6, 1.5V

batteries. To install and replace the batteries, please

follow the steps below:

1. Insert finger or other solid object in the space at the

bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity(see

marking).

3. Replace compartment cover.

INSTALL AND REPLACE BATTERIES IN THE

THERMO-HYGRO TRANSMITTER

The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please follow the steps

below:

1. Remove the battery compartment cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is

because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the

Weather station in the first 3 minutes of power being supplied to it

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to an authorized

depot.

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro

outdoor transmitter”above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install

and replace batteries in the Weather Station”above). Once the batteries are in place, all segments of the LCD

will light up briefly and a short signal tone will sound. Following the indoor temperature/humidity and the time as

0:00 will be displayed. If these information are not displayed on the LCD after 60 seconds, remove the batteries

and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to

the next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The

outdoor temperature and humidity data should then be displayed on the Weather station. If this does not happen

after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the

transmitter should not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”).

Note:

In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts. Always wait at

least 1 minute after removing the batteries before reinserting, otherwise start up and transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the

batteries are in place, all segments of the LCD will light up briefly and a short signal tine will sound. Following the

indoor temperature/humidity and the time as 0:00 will be displayed. If these information are not displayed on the

LCD after 60 seconds, remove the batteries from both units and wait for at least 60 seconds before reinserting

them.

4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then be displayed on the

Weather Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from the

first transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station

displays the information of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon should then be

displayed on the Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed

from all the units and reset from step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the

Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed

and the channel icon will shift back to "1" once the third transmitter is successfully received. If this is not happen,

user shall restart the setting up from step 1.

Note : User shall insert the batteries into the third transmitter within 45 seconds after the Weather Station

displays the information of the first transmitter.

8. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the

transmitter should not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described above. Should

transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step

RESETTING

The Weather Station and the Thermo-hygro transmitter need to be reset when one of the following conditions occur:

•

Unsuccessful 868MHz signal reception.

•

Malfunction on the units.

•

Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute before powering up the Weather station

again. Proceed from step 1 in “Setting Up”.

Andere Handbücher für Wireless Weather Station

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology V42-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX233RW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7032UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7391U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WEATHER DIRECT WD-3103U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83332 Bedienungsanleitung

La Crosse Technology

La Crosse Technology SW403 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417BL Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T84237 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7014CH-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V10-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1516-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather History Interval Handbuch

La Crosse Technology

La Crosse Technology WS-3610-CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7026U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-7047U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2813U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7220U-IT Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung