La Crosse Technology WS-9049 Bedienungsanleitung

WS-9049 WEATHER STATION

Instruction Manual

TABLE OF CONTENTS

Topic Page

Inventory of Contents 3

Features 4

Settin

up 6

WWVB radio controlled time 14

Function ke

s 15

LCD screen 18

Manual settings 19

LCD contrast 20

Time Zone Settin

Daylight saving time ON/OFF 21

Time reception ON/OFF 22

12/24 hour time display 23

Manual time setting 23

Calendar settin

Temperature measuring units (ºF/ºC) 26

Air pressure measuring Units (inHg/hPa) 26

Relative pressure setting 27

Forecast sensitivit

settin

Alarm

(

settin

and snooze

)

Moon phases 30

Indoor temperature and humidity 31

Comfort indicator 32

lin

and resettin

the indoor data 33

Weather forecast tendenc

and icons 34

Air pressure histor

(

bar

raph

)

Outdoor temperature and humidity 38

Toggling and resetting the outdoor data 39

915MHz reception 41

Mountin

Care and Maintenance 45

Specifications 46

Warranty Information 48

INVENTORY OF CONTENTS

1. Wireless Weather Station

2. Thermo/hygro transmitter (TX29UD-TH-IT)

3. Instruction manual

INSTANT TRANSMISSION is the state-of-

the-art new wireless transmission

technology, exclusively designed and

developed by LA CROSSE

TECHNOLOGY. INSTANT

TRANSMISSION offers you an

immediate update (every 4 seconds!) of

all your outdoor data measured from the

transmitters: follow your climatic

variations in real-time!

This product offers:

Foldable

stands

LCD

Display

Function keys

FEATURES:

The Weather Station

WWVB Radio controlled time with manual set option

Time reception ON/OFF (user selectable)

12/24 hour time display

Time zone option ±12 hours

Daylight saving time (DST On/Off)

Battery

compartment

Hanging

hole

Displays Weekday with Date

Alarm with snooze function

Displays 12 Moon phases throughout the year

Weather forecasting with weather tendency indicator

Indoor comfort indicator

Temperature display in °F/°C

Indoor & outdoor temp w\ MIN/MAX and time of measurement

Humidity data display as RH%

Indoor and outdoor humidity with MIN/MAX records

Relative air pressure hPa/ inHg with adjustable reference value

Weather icon sensitivity setting

Relative air pressure history for the past 24 hours (electronic

barometer with barometric pressure trend)

LCD contrast selectable

Can receive up to 3 outdoor transmitters

Wireless transmission at 915 MHz

Signal reception intervals at 4 seconds

Low battery indicator

Table standing or wall mounting

Thermo-Hygro Transmitter

Remote transmission of outdoor

temperature and humidity to weather station

by 915 MHz signals

Alternate display of temperature and

humidity display

Water-resistant casing

Wall mounting case. (Mount in a sheltered

place. Avoid direct rain and sunshine)

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and

replace batteries in the Thermo-hygro outdoor transmitter”on

page 11).

2. Within 2 minutes of powering up the transmitter, insert the batteries

in the Weather Station (see “How to install and replace batteries

in the Weather Station”on pages 11-12). Once the batteries are

in place, all segments of the LCD will light up briefly and a short

signal tone will sound. Next the indoor temperature/humidity is

displayed and the time reads 12:00. If this information is not

displayed on the LCD after 60 seconds, remove the batteries and

wait for at least 60 seconds before reinserting them. Once the

indoor data is displayed you may proceed to the next step.

3. After the batteries are inserted, the Weather station will start

receiving data signal from the transmitter. The outdoor temperature

and humidity data should then be displayed on the Weather station.

If this does not happen after 2 minutes, remove the batteries from

both units, and then restart the process from step 1.

4. The distance between the Weather Station and the transmitter

should not be more than 330 feet to ensure sufficient 915 MHz

transmission. (See notes on “Positioning” and “915 MHz

Reception”).

Note:

When changing batteries, ensure that they do not spring free from

the contacts. Always wait at least 1 minute after removing the

batteries before reinserting, otherwise start up and transmission

problems may occur.

Please note that initial set up of the weather station should be with

the sensor(s) within 5 feet of the display for 15 minutes. Once

connection is established and locked in for 15 minutes the sensors

can be moved, but not more than 330 ft (open air) from the display.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and

transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the

batteries in the Weather Station. Once the batteries are in place, all

segments of the LCD will light up briefly and a short signal tone will

sound. Next the indoor temperature/humidity is displayed and the

time reads 12:00. If this information is not displayed on the LCD

after 60 seconds, remove the batteries from both units and wait for

at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity data from the first

transmitter (channel 1) and the signal reception icon should be

displayed on the Weather Station. If this does not happen after 2

minutes, remove the batteries from both units, and then restart the

process from step 1.

5. Insert the batteries in the second transmitter as soon as the signal

reception icon and outdoor data are displayed on the Weather

Station. Then within 2 minutes, the channel 2 outdoor data from the

second transmitter and the "channel 2" icon should be displayed on

the Weather Station. If this does not happen after 2 minutes,

remove the batteries from both units, and then restart the process

from step 1.

Note : You must insert the batteries into the second transmitter

within 45 seconds after the Weather Station displays the

information of the first transmitter.

6. Insert the batteries in the third transmitter as soon as the "channel

2" icon and outdoor data are displayed on the Weather Station.

Then within 2 minutes, the channel 3 outdoor data from the third

transmitter will be displayed and the channel icon will shift back to

"1" once the third transmitter is successfully received. If this does

not happen after 2 minutes, remove the batteries from both units,

and then restart the process from step 1.

Note: You must insert the batteries into the third transmitter within

45 seconds after the Weather Station displays the information of

the first transmitter - or immediately after reception of the second

transmitter is finished.

7. The distance between the Weather Station and the transmitter

should not be more than 330 feet to ensure sufficient 915 MHz

transmission. (See notes on “Positioning” and “915 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setup for additional sensors is not

followed as described above. Should transmission problems occur, it is

necessary to remove the batteries from all units and start again the set-up

from step 1.

Note:

If the signal reception is not successful on the first frequency of

915MHz for 45 seconds, the frequency is changed to 920MHz and

the learning is tried for another 45 seconds. If it is still not

successful the reception is tried for 45 seconds on 910MHz. This

will also be done during re-synchronization.

When the weather station is receiving the WWVB time signal, the

outdoor transmitter data signal will temporarily not be received by

the weather station. During this short period of time, the outdoor

readings shown on the weather station will not be renewed until the

WWVB time signal is successfully received.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-

HYGRO TRANSMITTER

The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery cover.

Note:

When changing batteries in any of the units, all units

need to be reset by following the setup procedures.

This is due to a random security code assigned by the

transmitter at start-up. This code must be received

and stored by the Weather Station in the first 3

minutes of power being supplied to the transmitter.

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 2 x C, IEC LR14 1.5V batteries. To install and

replace the batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center

of the battery compartment and lift up to remove the cover.

2. Insert batteries observing the

correct polarity (see marking).

3. Replace compartment cover.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis

to ensure optimum accuracy of these units.

Please participate in the preservation of the

environment. Return used batteries to an authorized

depot.

RESET

The Weather Station and the Thermo-hygro transmitter need to be reset

when one of the following conditions occur:

Unsuccessful 915 MHz signal reception.

Malfunction on the units.

Battery replacement.

To perform a reset, remove all batteries from the units. Wait for at least 1

minute before powering up the Weather station again. Proceed from step

1 in “Setting Up”.

ABOUT WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology—Time and

Frequency Division) WWVB radio station is located in Ft. Collins,

Colorado, and transmits the exact time signal continuously throughout the

United States at 60 kHz. The signal can be received up to 2,000 miles

away through the internal antenna in the weather projection station.

However, due to the nature of the Earth’s Ionosphere, reception is very

limited during daylight hours. The wireless weather station will search for

a signal every night when reception is best.

The WWVB radio station receives the time data from the NIST Atomic

clock in Boulder, Colorado. A team of atomic physicists is continually

measuring every second, of every day, to an accuracy of ten billionths of

a second per day. These physicists have created an international

standard, measuring a second as 9,192,631,770 vibrations of a Cesium-

133 atom in a vacuum. For more detail, visit

http://www.boulder.nist.gov/timefreq.htm. To listen to the NIST time, call

(303)499-7111. This number will connect you to an automated time,

announced at the top of the minute in “Coordinated Universal Time”,

which is also known as Greenwich Mean Time (GMT). This time does not

follow Daylight Saving Time changes. After the top of the minute, a tone

will sound for every second. It is possible that your wireless weather

station may not be exactly on the second due to the variance in the

quartz. However, the clock will adjust the quartz timing over the course of

several days to be very accurate; under 0.10 seconds per day.

IN key OUT/+ key

ALM/DATE key

SET key

SNOOZE/CH key

FUNCTION KEYS:

Weather Station

The Weather Station has 5 function keys:

SET key

Press and hold the key to enter manual set modes: LCD contrast,

time zone, DST ON/OFF, time reception ON/OFF, 12/24 hour

display, manual time setting, calendar, temperature °F/°C, pressure

hPa/inHg, relative pressure value, and weather icon sensitivity

setting

Reset all MIN/MAX records

Stop the alarm during alarm ringing

Stop snooze mode

ALM/DATE key

Press and hold key for 3 seconds to enter the alarm set mode

Activate/de-activate the alarm time

Silence the alarm

Cancel snooze mode

Display date

IN key

Press to toggle between MAX/MIN and current indoor

temperature/humidity data

Press to set the alarm hour (inside alarm setting mode)

Decrease relative pressure value (within manual set mode)

Silence the alarm

Cancel snooze mode

OUT/+ key

Press briefly to toggle between MAX/MIN and current outdoor

temperature/humidity data

Increase, change, toggle all values in manual set mode

Press to set the alarm minute (inside alarm setting mode)

Silence the alarm

Cancel snooze mode

SNOOZE/CH key

Activate snooze function

Exit the manual and alarm set modes

Switch between display of channels (if more than 1 transmitter is

used)

LCD SCREEN

The LCD screen is split into 4 sections displaying the information for

time/calendar/alarm/moon phase, indoor data, weather forecast and

outdoor data.

Moon phase

icon

Weathe

tendenc

Time

Calendar

or alarm

time

Indoor relative

humidity in

RH%

Time reception icon

(for WWVB time)

Indoo

temperature

in °F/°C

Weathe

forecas

icon

Outdoor data

signal reception

indicator*

Outdoo

temperature in

°F/°C

Outdoor

relative

humidity in

RH%

Comfort

cato

r i

Relative air

pressure history

Relative air

pressure in

hPa / inHg

Alarm icon

Remote transmitter

number (if more than 1

transmitter is used)

Low batter

indicato

* When the signal is successfully received by the Weather Station, the

outdoor transmission icon will be switched on. If not successful, the

icon will not be shown on LCD. You can then see whether the last

reception was successful (icon on) or not (icon off). A short blinking of the

icon indicates that signal reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET

key:

LCD contrast setting

Time zone setting

DST ON/OFF setting

Time reception ON/OFF setting

12/24-hour format setting

Manual time setting

Calendar setting

°F/°C temperature setting

Air pressure setting (hPa / inHg)

Relative air pressure setting

Weather forecasting icon sensitivity setting

Note: SET mode is entered by pressing and holding the SET key for 3

seconds. If you do not press any keys for 15 seconds while in SET

mode, the Weather Station switches out of SET mode.

LCD CONTRAST SETTING:

The LCD contrast has 8 levels, from 0 to 7 (Default setting is 4):

1. Press and hold the SET key until the digit starts flashing.

2. Use the OUT/+ key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and

enter the Time Zone setting.

TIME ZONE SETTING:

Flashing

Last digit flashing

The default time zone of the Weather Station is “-5h”. U.S. time zones are

negative numbers: –5h (EST), -6h (CST), -7h (MST) and –8h (PST).To

set a different time zone:

1. The current time zone value starts flashing.

2. Use the OUT/+ key to set the time zone. The range runs from 0 to -

12 and then runs from +12 back to 0 in consecutive 1-hour

intervals.

3. Confirm with the SET key and enter the Daylight saving time

ON/OFF.

DAYLIGHT SAVING TIME ON/OFF SETTING (DST ON/OFF)

The daylight time saving (DST) function can be set ON/OFF. Default

setting is “ON”:

1. “ON” will flash on the LCD and "DSt" will display.

2. Use the OUT/+ key to turn the daylight saving time function ON or

OFF.

Flashing

3. Confirm with the SET key and enter the Time reception ON/OFF

setting.

TIME RECEPTION ON/OFF SETTING:

In areas where reception of the WWVB time is not possible, the WWVB

time reception function can be turn OFF. The clock will then work as a

normal Quartz clock. (Default setting is ON).

4. “ON” will start flashing on the LCD and "RCC" will display.

5. Use the OUT/+ key to turn OFF the time reception function.

6. Confirm with the SET key and enter the 12/24-hour format setting.

Note:

If the Time Reception function is turned OFF, the clock will not attempt

reception of the WWVB time. The time reception icon and the “WWVB”

icon will not be displayed on the LCD. Time Reception must be set to

"ON" for the WVVB atomic time to function.

Flashing

12/24-HOUR FORMAT SETTING:

The hour display can be selected to show hours in 12-hour or 24-hour

settings. (Default 12-Hour)

1. Use the OUT/+ key to toggle between “12H” or “24H”.

2. Confirm with the SET key and enter the Manual time setting.

MANUAL TIME SETTING:

If Weather Station cannot detect the WWVB-signal due to disturbances,

transmission distance, etc., the time can be set manually. The clock will

then work as a normal Quartz clock.

Hour flashing

Minutes flashing

Flashing

1. The hour digit will start flashing.

2. Use the OUT/+ key to set the hour.

3. Press again the SET key to set the minutes. The minute digits start

flashing.

4. Use the OUT/+ key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note: If the WWVB reception function is set to "ON", the unit will still try to

receive the WWVB time signal between midnight and 6:00 am every day,

even if the time was set manually. When it does receive the signal, it will

change the manually set time into the received time. During reception

attempts, the WWVB tower icon will flash. If reception has been

unsuccessful, then the WWVB tower icon will not appear but reception

will still be attempted the following hour.

CALENDAR SETTING:

Year

Note: When set to 24-hour time, the calendar setting mode will display

the date to the left of the month.

The date default of the Weather station is 1. 1. 2006. Once the radio-

controlled time signals are received, the date is automatically updated. If

the signals are not received, the date can also be set manually.

1. The year starts flashing.

2. Use the OUT/+ key to set the year (between year 2003-2029).

3. Press the SET key again to confirm and to enter the month setting.

The month starts flashing.

4. Use the OUT/+ key to set the month.

5. Press the SET key again to confirm and to enter the date setting

mode. The date starts flashing.

6. Use the OUT/+ key to set the date.

7. Confirm all calendar settings with the SET key and enter the

Temperature unit setting.

Month and date

(12hr time format)

Date and month

(24hr time format)

Note: The Day of the Week will set automatically when the year, month

and date are set.

°C/°F TEMPERATURE SETTING:

The temperature display can be selected to show temperature data in °C

or °F (Default °F).

1. Use the OUT/+ key to toggle between “°C” and “°F”.

2. Confirm with the SET key and enter the Air pressure unit setting.

AIR PRESSURE UNIT SETTING (hPa / inHg):

The pressure display can be selected to show relative air pressure in hPa

or inHg (default is “inHg”).

Flashing

1. Use the OUT/+ key to toggle between “hPa” or “inHg” unit

2. Confirm with the SET key and enter the Relative air pressure

value setting.

Note:

Units of weather icon sensitivity and air pressure history are not affected.

They are always expressed in hPa.

RELATIVE AIR PRESSURE VALUE SETTING

The default relative pressure value is 29.92 inHg (1013 hPa). This can be

manually set to another value within the range of 28.35 – 30.72 inHg (960

– 1040 hPa) for a better reference.

1. The current relative pressure value will start flashing

2. Use the OUT/+ key to increment and IN key to decrement the

value. Holding the key allows the value to advance faster.

Flashing

3. Confirm with the SET key and enter the Weather forecast icon

sensitivity setting.

WEATHER FORECASTING ICON SENSITIVITY SETTING:

For locations with rapid changes of weather conditions, the weather icons

sensitivity can be set to a different level for faster display of weather

conditions.

1. The current sensitivity value will start flashing.

2. Use the OUT/+ key to set the weather sensitivity level. There are 3

levels of sensitivity: 2, 3 and 4. The value corresponds to the

change of air pressure in hPa before the weather icon will switch to

another state. Level 2 is the most sensitive setting (coastline); level

4 is the slowest (desert) recording setting (default setting is "3").

3. Confirm with the SET key and exit the Manual settings.

Flashing

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting mode anytime during the manual setting, press

the SNOOZE/CH key or wait for automatic timeout. The mode will return

to normal time display.

ALARM SETTING:

The alarm time can be set when pressing the ALM/DATE key.

1. Press and hold the ALM/DATE key to enter the alarm set mode.

The alarm digits flash.

2. Use the IN key to set the alarm hour.

3. Use the OUT/+ key to set the alarm minute.

4. Confirm with SNOOZE/CH key and exit the Alarm setting. The

icon ((●)) will be displayed along with the set alarm time.

Alarm icon

Alarm time

Note: If the calendar is displayed in the Weather station, the alarm is

NOT active.

To view and activate the alarm, press the ALM/DATE key. The

alarm icon (()) and the alarm time will be displayed, indicating that

the alarm setting is activated.

The maximum alarm ring duration is 2 minutes.

SNOOZE SETTING AND STOPPING THE ALARM:

The 10 minute snooze function can be set when the alarm is ringing by

pressing the SNOOZE/CH key.

When the alarm is snoozing, the alarm icon (()) will remain flashing

indicating that the alarm is active but is in Snooze mode. To stop the

snooze function when it is in snooze period, press any key except the

SNOOZE/CH key.

To stop the alarm, press any key (except for SNOOZE/CH).

MOON PHASES SYMBOL

The Moon icon of the Weather station will also display all 12 Moon

phases throughout the year according to the set calendar.

New Moon Small

Waxing

Crescent

Large

Waxing

Crescent

First

Quarter

Small

Waxing

Gibbous

Large

Waxing

Gibbous

Small

Waning

Crescent

Large

Waning

Crescent

Last

Quarter Small

Waning

Gibbous

Large

Waning

Gibbous

Full Moon

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:

The indoor temperature and humidity data and the indoor comfort

indicator are automatically updated and displayed on the second section

of the LCD.

THE COMFORT LEVEL INDICATOR:

Comfortable : A happy face icon “” indicates a temperature

between 68ºF and 78.6ºF (20°C and 25.9°C) and

relative humidity reading between 45% and 65%.

Uncomfortable : A sad face icon “” indicates any value outside the

comfortable range.

Indoor

relative

humidity

in RH%

Indoo

temperature

in °C or ºF

MAX icon

TOGGLING AND RESETTING THE INDOOR READINGS:

1. To toggle between the current indoor and the MAX/MIN indoor

temperature, and the humidity data and the times (for temperature

data only) they were recorded, press the IN key:

- Once to show the MAX indoor temperature and humidity

data with the recorded time and date.

- Twice to show the MIN indoor temperature and humidity

data with the recorded time and date.

- Three times to return to the current displayed values

2. Once the MIN or MAX data is displayed, press and hold the SET

key for 3 seconds to reset the respective MIN or MAX record to

current temperature and humidity data, and current time, date

display.

Note: The MIN or MAX data needs to be reset individually.

WEATHER FORECAST AND WEATHER TENDENCY:

WEATHER FORECASTING ICONS:

Weather icons in the third section of LCD can be displayed in any of the

following combinations:

Sunny Cloudy with sunny intervals Rainy

For every sudden or significant change in the air pressure, the weather

icons will update accordingly to represent the change in weather. If the

icons do not change, then it means either the air pressure has not

changed or the change has been too slow for the Weather station to

change of icon if the weather gets any better (with sunny icon) or worse

(with rainy icon), since the icons are already at their extremes.

The icons displayed forecast the weather in terms of getting better or

worse and not necessarily sunny or rainy as each icon indicates. For

FORECAST FORECAST FORECAST

example, if the current weather is cloudy and the rainy icon is displayed, it

does not mean that the product is faulty because it is not raining. It simply

means that the air pressure has dropped and the weather is expected to

get worse but not necessarily rainy.

Note: After setup, readings for weather forecasts should be disregarded

for the next 48-60 hours. This will allow sufficient time for the Weather

station to collect air pressure data at a constant altitude and therefore

result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be

guaranteed. The weather forecasting feature is estimated to have an

accuracy level of about 75% due to the varying areas the Weather station

has been designed for use in. In areas that experience sudden changes

in weather (for example from sunny to rain), the Weather station will be

more accurate compared to use in areas where the weather is constant

most of the time (for example mostly sunny).

If the Weather station is moved to another location significantly higher or

lower than its initial standing point (for example from the ground floor to

the upper floors of a house), discard the weather forecast for the next 48-

60 hours. By doing this, the Weather Station will not mistake the new

location as being a possible change in air-pressure when really it is due

to the slight change of altitude.

WEATHER TENDENCY INDICATOR

Working together with the weather icons are the weather tendency

indicators (located on the left and right sides of the weather icons). When

the indicator points upwards, it means that the air-pressure is increasing

and the weather is expected to improve. When the indicator points

downwards, the air-pressure is dropping and the weather is expected to

become worse.

Taking this into account, one can see how the weather has changed and

is expected to change. For example, if the indicator is pointing

downwards together with cloud and sun icons, then the last noticeable

change in the weather was when it was sunny (the sun icon only).

Therefore, the next change in the weather will be cloud with rain icons

since the indicator is pointing downwards.

Note:

Once the weather tendency indicator has registered a change in air

pressure, it will remain permanently displayed on the LCD.

AIR PRESSURE HISTORY (ELECTRONIC BAROMETER WITH

BAROMETRIC PRESSURE TREND)

The third section of the LCD also shows the relative air pressure value

and the air pressure history.

The bar chart indicates the air pressure history trend over the last 24

hours in 7 steps, 0h, -3h, -6h, -9h, -12h, -18h, and -24h. The “0h”

represents the current full hour air pressure recording. The columns

represent the “hPa” (0, ±2, ±4, ±6) at specific time. The “0” in the middle

of this scale is equal to the current pressure and each change (±2, ±4, ±6)

represents how high or low in “hPa“ the past pressure was compared to

the current pressure.

If the bars are rising, it means that the weather is getting better due to the

increase of air pressure. If the bars go down, it means the air pressure

Air pressure over the last 24 hours

has dropped and the weather is expected to get worse from the present

time “0h“.

Note: For accurate barometric pressure trends, the Weather Station

should operate at the same altitude. For example, it should not be moved

from the ground to the second floor of the house. Should the unit be

moved to a new location, discard readings for the next 48-60 hours.

OUTDOOR TEMPERATURE AND HUMIDITY DATA

The fourth LCD section shows the outdoor temperature and humidity, the

reception indicator, the transmitter identification number and the

MIN/MAX outdoor data.

Outdoo

temperature

in °C/ °F

Outdoor

relative

humidity

in RH%

Outdoor transmitter

identification number

MIN icon

TOGGLING AND RESETTING THE OUTDOOR DATA

1. To toggle between the current outdoor and the MAX/MIN outdoor

temperature and humidity data and the times (for temperature data

only) they were recorded press the OUT/+ key:

- Once to show the MAX outdoor temperature and humidity data

with the recorded time and date.

- Twice to show the MIN outdoor temperature and humidity data

with the recorded time and date.

- Three times to return to the current displayed values.

2. Once the MIN or MAX data is displayed, press and hold the SET

key for 3 seconds to reset the respective MIN or MAX record to

current temperature and humidity data, and current time, date

display.

Note: The MIN or MAX data needs to be reset individually.

TO VIEW THE MIN/MAX DATA FROM DIFFERENT

TRANSMITTERS

When more than 1 transmitter used:

1. To toggle between transmitters, press the SNOOZE/CH key:

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-7059-SU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9124TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3610-CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TXV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-179OR Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84107 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3510 Benutzerhandbuch

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V15 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather History Interval Handbuch

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA80550 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9626U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9043U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9075TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2315CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231RW Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7015 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1912 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung