La Crosse Technology WS-9065TWC Bedienungsanleitung

WS-9065TWC

Wireless 433 MHz

Radio-controlled Weather Station

Instruction Manual

TABLE OF CONTENTS

Topic Page

Inventory of Contents/Additional Equipment 3

About WWVB 3

Quick Set-Up Guide 4

Detailed Set-Up Guide

Battery installation 5

Program Mode

Program Sequence and Default Settings 6

Function Keys 6

Setting the LCD Contrast 6-7

Setting the Time Zone 7

Daylight Saving Time Setting 7-8

Radio-controlled Time Setting 8

12/24-hour Time Setting 8

Setting the Time 9

Setting the Year, Day and Month 9-10

Setting the Snooze 10

Setting the Temperature Format 10

Setting the Forecast Sensitivity 10-11

Features

Weather Forecast Icons and Tendency Arrows 11-12

Indoor Temperature, Humidity, & Comfort

Level Indicator 12

Outdoor Temperatures 13

Minimum & Maximum Records (Indoor,

Outdoor, & Resetting) 13-14

Additional Remote Control Sending Units (Set-Up,

Viewing, & Operation) 14-15

Mounting 15-17

Troubleshooting 17-18

Maintenance & Care 18

Specifications 19

Warranty Information 20-21

INVENTORY OF CONTENTS

1. The indoor weather station (Figure 1).

2. One remote temperature sensor with mounting bracket (Figure 2).

3. Three each, ½” Philips screws.

4. One strip double-sided adhesive tape.

5. Instruction manual and warranty card.

ADDITIONAL EQUIPMENT (not included)

1. Three fresh AA 1.5V batteries for the indoor weather station.

2. Two fresh AA 1.5V batteries for the remote temperature sensor.

3. One, Philips screwdriver for mounting.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology—Time and Frequency Division)

WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date

signal continuously throughout the United States at 60 kHz. The signal can be received up to

2,000 miles away through the internal antenna in the Weather Station. However, due to the

nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The weather

station will search for a signal every night when reception is best. The WWVB radio station

derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic

physicists is continually measuring every second, of every day, to an accuracy of ten

billionths of a second per day. These physicists have created an international standard,

measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more

information on the atomic clock and WWVB please see the NIST website at

http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.

Figure 1

Time LCD

Date LCD

Forecast LCD

Indoor LCD

Outdoor LCD

Figure 2

Mounting

Bracket TX6U remote

temperature sensor

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1. Have the indoor weather station and remote temperature sensor 3 to 5 feet

apart.

2. Batteries should be out of both units for 10 minutes.

3. Place the batteries into the remote temperature sensor first then into the

indoor weather station.

(All outdoor remotes must be started before the indoor station)

4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the indoor weather station and remote temperature sensor will start to talk to each

other and the display will show the indoor temperature, humidity and an outdoor temperature.

If the indoor weather station does not display all information after the 15 minutes please retry

the set up as stated above. After all information has been displayed for 15 minutes you can

place your sensor outdoors and set your time.

The remote temperature sensor should be placed in a dry, shaded area. The remote

temperature sensor has a range of 80 feet. Any walls that the signal will have to pass through

will reduce distance. An outdoor wall or window can have up to 30 feet of resistance and an

interior wall can have up to 20 feet of resistance. Your distance plus resistance should not

exceed 80 ft. in a straight line.

Note: Fog and mist will not harm your remote temperature sensor but direct rain must be

avoided.

Note: The remote temperature sensor transmits a signal every minute. After the batteries have

been installed, the indoor weather station will search for the signal for a duration of 15

minutes. If there is no temperature reading in the OUTDOOR LCD after 15 minutes, make

sure the units are within range of each other, or repeat the battery installation procedure. If a

button is pressed before the indoor weather station receives the temperature signal, you will

need to follow the battery installation procedure again.

To complete the set up of your wireless weather station after the 15 minutes have passed

please follow the steps that follow in the Detailed Set-Up Guide.

DETAILED SET-UP GUIDE

I. BATTERY INSTALLATION

A. REMOTE TEMPERATURE SENSOR

1. Remove the mounting bracket. The bracket

snaps on and off easily.

2. Remove the battery cover, by sliding the cover

down.

3. Observing the correct polarity install 2 AA

batteries. The batteries will fit tightly (to avoid

start-up problems make sure they do not spring

free).

4. Replace the battery cover by sliding upwards.

Be sure battery cover is on securely.

B. INDOOR WEATHER STATION

1. Remove the battery cover. To do this,

insert a solid object in the space

provided at the lower-central position

of the battery cover, then push up and

pull out on the battery cover.

2. Observe the correct polarity, and install

3 AA batteries.

3. Replace the battery cover.

Note: Immediately after the batteries have been installed, the LCD

(Liquid Crystal Display) will flash, and a tone will sound. Within a few

seconds the indoor temperature, indoor relative humidity, and the weather

icons (sun and clouds) will be displayed. If not, remove batteries for 10

seconds and reinstall. If the outdoor temperature is not displayed within

four minutes, remove batteries from both units, wait 10 seconds, and

reinstall making sure to install batteries into the remote temperature

sensor first. The time will show -:-- and start searching for the signal. If it

successfully receives the time signal (usually at night), it will display the

correct time (default time-zone is Eastern).You will need to adjust the time

zone to match your local time.

Battery

Cover

Battery

Cover

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the CH button is pressed

during the programming mode, the unit will confirm/set the last information

entered—the display will stop flashing and return to normal time-date readings. If

you don’t leave the program mode during the programming of sections IV through

XI, you can advance to step 4 of the next program setting. If you do leave the

program setting (or want to program a specific setting) follow each instructional

step to program that setting.

I. PROGRAMMING SEQUENCE AND DEFAULT SETTINGS

The programming sequence and default (factory) settings are as follows:

LCD Contrast 5

Time Zone -5 (Eastern)

Daylight Saving Time 1 (on)

Radio-controlled time reception ON

12/24-hour time 12

Time 12:00

Year 2003

Day and Month 1.1.

Snooze (this function not used) 10

Temperature Format °F

Forecast Sensitivity 2

Please note that while there is a snooze adjustment in the programming this is an

unused function as there is no alarm on the indoor weather station.

II. FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD.

III. SETTING THE LCD CONTRAST

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the

lightest, and “Lcd 7” is the darkest.

3. Press and release the IN button to select the level you desire.

4. Press and release the SET button to confirm and advance to the Time

Zone setting.

IV. TIME ZONE SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button again.

4. The time zone will flash in the date LCD.

5. Press and release the IN button to select your time zone.

Note: When a time zone for the U.S. is selected the corresponding

abbreviation will appear above the time (please see the table on the next

page). It is possible to select any time zone from –12 GMT to +12 GMT

(for example to see the time in another country)

TIME ZONES

GMT 0

Atlantic -4

EST; Eastern -5

CST; Central -6

MST; Mountain -7

PST; Pacific -8

ALA; Alaska -9

HAW; Hawaii -10

6. Press and release the SET button to confirm and advance to the

Daylight Saving Time setting.

V. DAYLIGHT SAVING TIME (DST) SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button twice.

4. “DST” will appear in the date LCD and either “1” or “0” will flash.

5. Press and release the IN button to select DST on or off.

“DST 0” indicates that the feature is off and the WWVB will not change

times automatically. “DST 1” indicates that the feature is on and the

WWVB will change times automatically.

Note: Some locations (Arizona and parts of Indiana) do not follow

Daylight Saving Time, and should select “DST 0.”

6. Press and release the SET button to confirm and advance to the radio-

controlled time on/off setting.

VI. RADIO-CONTROLLED TIME ON/OFF SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button three times.

4. “RCC” will appear in the date LCD and “ON” or “OFF” will flash in

the time LCD.

5. Press and release the IN button to select radio-controlled time on or

off.

6. Press and release the SET button to confirm and advance to the

12/24-hour time setting.

VII. 12 OR 24 HOUR TIME SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button four times.

4. “12h” or “24h” will flash in the time LCD.

5. Press and release the IN button to select 12 or 24-hour time format.

Note: When in the 12-hour format “P.M” will appear to the left of the

hour in the time LCD between the hours of noon and midnight.

6. Press and release the SET button to confirm and advance to the time

setting.

VIII. TIME SETTING

There are two methods by which the time and date can be set:

A) Automatically via WWVB reception, or

B) Manually.

A. WWVB (Remote Control Time)

This method requires you to do nothing, except wait for the signal to be

received, and to select a time zone. Reception usually takes approximately 10

minutes during optimal conditions. The best condition for reception is at night,

between midnight and 6:00 am—when there is less atmospheric interference.

To keep your time as accurate as possible, the indoor weather station conducts

a WWVB search every night between these hours, and overrides any manually

set time. The WWVB tower icon (appearing in the TIME LCD) will flash

when a signal-search is in progress and a signal is being received, and will

remain steady when the signal has been received. If the WWVB time has not

been received after 10 minutes of battery installation, you may manually set

the time or leave the time function alone (reception will occur regardless).

B. MANUAL TIME SETTING

Note: When in the 12-hour format “P.M” will appear to the left of the hour in

the time LCD between the hours of noon and midnight.

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button five times.

4. The time will flash in the time LCD.

5. Press and release the IN button to advance the hours.

6. Press and release the OUT button to advance the minutes.

7. Press and release the SET button to confirm and advance to the year

setting.

IX. SETTING THE YEAR, DAY AND MONTH

Note: Reception of the WWVB signal will also set the date and day. The

reception of the signal will override any programmed date and day.

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button six times.

4. The year will flash in the date LCD.

5. Press and release the IN button to advance the year.

6. Press and release the SET button to confirm and advance to the day/month

setting.

7. The day and month will flash in the date

LCD.

8. Press and release the IN button to advance the day.

9. Press and release the OUT button to advance the month.

10. Press and release the SET button to confirm and advance to the snooze

setting.

X. SETTING THE SNOOZE

Note: This is an unused function of the indoor weather station and should be

disregarded. The setting has no bearing on the operation. Please press and release

the SET button to advance to select the temperature format.

XI. SELECTING °F OR °C

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the time LCD and the number setting will flash.

3. Press and release the SET button nine times.

4. Either ”°F” or “°C” will flash in the time LCD.

5. Press and release the IN button to select the temperature format.

6. Press and release the SET button to confirm and advance to the forecast

sensitivity setting.

XII. SETTING THE FORECAST SENSITIVITY

Note: The forecast sensitivity can be adjusted to allow for areas that have

a higher or lower sensitivity to changing air pressure (for example coastal

areas have more pressure change than areas such as southern Arizona).

The numbers correspond to the amount of air pressure change necessary to

trigger a change in the forecast icon. Areas that tend to have more air

pressure change would set the sensitivity to 3, while areas that experience

lower than normal air pressure change would set the sensitivity to 1.

Andere Handbücher für WS-9065TWC

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WA-1030U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Abmessungen

La Crosse Technology

La Crosse Technology SW404 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless 433 MHz Temperature Station... Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1611 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2812U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3500 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1415BL Abmessungen

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS- 1910TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-146v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T85647 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9632U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology C85845 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2308AL Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA86515 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung