La Crosse Technology WS-3500 Bedienungsanleitung

TOUCH SCREEN WEATHER STATION MODEL

WS-3500

Operation Manual

Table of Contents

1 ...................... General

2 ....................... Important Touch Screen Operating Notes generally applicable

3 ...................... Putting into Operation

3.1 ................ Wiring the System

3.2 ................ Power Supply

3.2.1.......... Batteries

3.2.2.......... AC/DC Mains Adapter

3.2.3.......... Cable Connection

3.3 ................ System Start

3.4 ................ Placement

4 ...................... Setting Up

5 ...................... Display of stored Min/Max Values and Alarm Value Settings

6 ...................... Radio Controlled DCF77 Clock

7 ...................... Weather Tendency

8 ...................... Air Pressure History

9 ...................... Operating and Setting of various Functions

9.1 ................ Air Pressure

10 .................... Additional Information to Function Outdoor Temperature

11 .................... Operating and Setting of Functions Backlight, Buzzer and

Alarm section

11.1 .............. EL Backlight

11.2 .............. Buzzer

11.3 .............. Alarm

12 .................... PC Connection

12.1 .............. Data Storage

12.2 .............. Data Recall

12.3 .............. Connections and Software

13 .................... Technical Data

13.1 .............. Outdoor Data

13.2 .............. Data Transmission by 433 MHz Signal

13.3 .............. Data Transmission by Cable

13.4 .............. Indoor Data

13.5 .............. Power Supply

13.6 .............. PC Connection

13.7 ........... Dimensions

14 ................. Liability Disclaimer

1 General

Important Note:

Before inserting batteries to the units, please

carefully read the operation manual.

The shipping contents of the Touch Screen Weather Station WS-3500

include a Base Station (Receiver), a Thermo-Hygro Sensor (433 MHz

Transmitter), the respective Connecting Cables, an AC/DC Mains

Adapter and a PC Software Package on CD-ROM.

The Base Station is equipped with a Touch Screen LCD Monitor and

allows by use of comprehensive menu control the display of a vast

variety of time and weather data (from top to bottom):

•Radio Controlled Time (Time)

•Calendar (Date)

•Weather Forecast (Tendency)

•Air Pressure and Air Pressure History (Pressure, Pressure

History)

•Indoor Temperature and Humidity (Indoor Temp, Humidity)

•Outdoor Temperature and Humidity (Outdoor Temp, Humidity)

Furthermore the display of a number of additional data can be realised

by use of certain switching combinations (see further down).

Note: In case the menu is used all these indications are temporarily

replaced by the menu steps directly operable from the text section.

As an important feature exceeding the display on the LCD

Monitor the Weather Station allows by cable and software the

readout of all measured and displayed time and weather data in

form of complete history data sets, their processing and graphic

presentation on a PC as well as their tie on to Internet Web Sites.

2 Important Touch Screen Operating Notes generally

applicable

All actions and functions of the Weather Station are started on the

Touch Screen by slightly touching (not pressing!) the switching areas

appearing in star (٭) symbols (only in the text section at the bottom of

the LCD) or the displayed values respectively.

The setting of functions, values and units is in all modes performed by

use of the switching areas ٭ON٭or ٭OFF٭, ٭UP٭or ٭DOWN٭or by

direct unit selection.

Advancing to any next respective menu step with ٭NEXT٭, leaving or

terminating all respective modes with ٭EXIT٭.

Every programming step activated by touching a switching area on the

Touch Screen is being acknowledged by an acoustic signal (with

buzzer switched ON).

If during any process previously activated by use of the Touch Screen

no further action is activated for about 30 seconds the active process

is automatically terminated and switched back to the normal display

mode (automatic time out).

Alarm history selection

Time section

Weather

Tendency

section

Touch screen "switching area" on LCD:

Date section

Pressure History

section

Pressure section

Indoor humidity

section

Outdoor humidity

section

Backlight section

key

Buzzer selection key

Text Display

(Set up Display)

Outdoor temperature

section

Indoor

Temperature

section

3 Putting into Operation

At first it is to decide whether battery supply or mains supply (AC/DC

mains adapter included) will be used to operate the system. Both

methods allow the connection of Thermo-Hygro Sensor and Base

Station by cable or by 433 MHz radio signal.

3 Putting into Operation

At first it is to decide whether battery supply or mains supply (AC/DC

mains adapter included) will be used to operate the system. Both

methods allow the connection of Thermo-Hygro Sensor and Base

Station by cable or by 433 MHz radio signal.

Note:

Note: When putting the Weather Station into operation it is important

to tentatively perform in close proximity (e.g. on a table) a complete

wiring and setup of the system in the configuration of its prospective

use. This measure serves to test all components for correct function

before placing and mounting them at their final destinations.

AC/ DC adapter

PC COM Port cable

Thermo hygro sensor

3.1 Wiring the System

Wireless

Transmission

Direct cable

connection

The direct cable connection of Thermo-Hygro Sensor and Base

Station can be used in case that:

the flexibility of 433 MHz radio transmission is not needed and

data transmission absolutely free of any environmental interferences is

wanted.

3.2 Power Supply

The provision of power to the Weather Station can be performed by

use of batteries or by AC/DC mains adapter.

3.2.1 Batteries:

•First insert two Type AA 1.5 V batteries into the battery compartment

of the Thermo-Hygro-Sensor.

•Immediately following this insert three Type AA 1.5V batteries into

the battery compartment of the Touch Screen Weather Station.

Please help in the preservation of the environment and

return used batteries to an authorized depot.

3.2.2 AC/DC Mains Adapter:

•Firstly also insert two Type AA 1.5 V batteries into the battery

compartment of the Thermo-Hygro-Sensor.

•Immediately following this connect the AC/DC mains adapter to the

Base Station and then plug it into a regular mains outlet.

Note: In both cases it is important to observe this order of succession

since the Sensor will send an identification code which has to be

received and stored by the Base Station within the first few minutes of

operation.

After doing this full operation of the entire Weather Station System is

ensured.

3.2.3 Cable Connection:

One further feature of the direct cable connection mentioned in Item

3.1 above is that in case of AC/DC adapter operation power is

provided not only to the Base Station but to the Thermo-Hygro Sensor

as well by just this AC/DC adapter.

Note: System operation with cable connection while at the same

time providing power to the Base Station solely by batteries is not

recommended due to the considerably higher power consumption. The

batteries may however remain in the unit for emergency supply in case

of a power failure.

A change from cable operation to 433 MHz radio transmission or vice

versa is possible in any case since the Weather Station will recognize

this change and will automatically switch to the appropriate operating

mode.

3.3 System Start

After inserting the batteries respectively connecting the AC/DC adapter

the LCD of the Weather Station will for a few seconds display all

possible display segments for checking.

Immediately after this the unit will enter the so called play mode during

which for about 15 minutes all measured and received weather data

are being switched through, updated and displayed. During this time

period there will be no reception of the DCF77 time information.

Note: The play mode phase allows the user of the Weather Station

to check all cables for correct connection and all components for

correct function.

After completing the play mode the Touch Screen Weather Station will

automatically switch to the normal display mode from which all further

settings can be performed by the user. At this point of time the unit will

also automatically start reception of the DCF77 time information.

Important Note:

Reception of the radio-controlled time information will only take

place after completion of the play mode (approx. 15 minutes). In

case the user wants to start the system without waiting for

completion of the play mode it can be terminated prematurely by

once touching the TIME display in the upper left corner of the

LCD.

Prior to manual setting or reception of radio-controlled time

information there will be no recording of weather history data.

3.4 Placement

After the Weather Station has been checked for correct function with

regard to the above points and found fit, the mounting of the system

components can take place. It must be ensured however that all

components work properly together at their chosen mounting or

standing locations. If e.g. there appear to be problems with the 433

MHz radio transmission they can mostly be overcome by slightly

moving the mounting locations.

Note: Commonly the radio communication between receiver and

transmitter in the open field reaches distances of about maximum 100

meter providing that there are no interfering obstacles such as

buildings, trees, vehicles, high voltage lines, etc.

Radio interferences as they are created by PC screens, radios or TV

sets can in bad cases entirely cut off radio communication. Please

take this into consideration when choosing standing or mounting

locations.

4 Setting Up:

Note: Because of the default settings already determined by the

manufacturer it may not be necessary for the majority of users to

perform - outside possibly the Relative Air Pressure (see further down)

- any further basic settings. Changes however can easily be realized if

desired.

For basic settings the following menu is started by touching the Touch

Screen in the center of the text display (last two lines on the LCD).

Touching the display ٭SETUP٭will enter the setup mode.

The basic settings can now be performed in the following successive

order:

LCD Contrast →Contrast can be set in 8 steps from 0 to 7 (Default

4).

Time Zone →Time Zones can be set in the range from -12 to +12

hours (Default 0 hours for Central Europe).

DCF77 Radio Controlled Clock (RCC) →ON/OFF. In setting “OFF“

the clock is operating as a normal Quartz clock (Default RCC ON).

12/24 hour Time Display Format (Default 24 h Format).

Units

•Temperature Display (Temp) in °C or °F (Default °C).

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 308A-805 Technisches Datenblatt

La Crosse Technology

La Crosse Technology C83349 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2010 Kurzanleitung

La Crosse Technology

La Crosse Technology WS-9016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9611 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-805 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-2801-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-2511U Installationsanleitung

La Crosse Technology

La Crosse Technology 308-141WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology S86842 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8035U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6283 Installations- und Betriebshandbuch

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145B Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1415BL Abmessungen

La Crosse Technology

La Crosse Technology V15-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8300U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1510-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung