La Crosse Technology Wireless Weather Station Bedienungsanleitung

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this Weather station with wireless 868MHz

transmission.It not only displays the indoor temperature and humdity but also

receives the outdoor data. It is further acting as a DCF-77 radio controlled clock.

With the totally 15 different weather forecast icons featured by "weather man",

users can easily observe the forecast weather condition and will no longer worry

the sudden weather change. This innovative product is ideal for use in the home or

office.

« Instant Transmission+» is the up and coming state-of-the-art new

wireless transmission technology, exclusively designed and developed by

LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured

from the transmitters: follow your climatic variations in real-time!

FEATURES:

The Weather station

Removable

Stand

Battery

compartment

cover

Function

Keys

LCD

Display

•DCF-77 Radio controlled time with manual setting options

•DCF Time reception ON/OFF

•12/24 hour display

•Hour and minute display

•Time zone option ±12 hours

•Wireless transmission at 868 MHz

•Display indoor temperature and humidity

•Display outdoor temperature and humidity (3 channels)

•Outdoor Signal reception intervals at 16-second

•Weather forecasting with 15 easy-to-read weather forecast signs featured by

weather man

•Weather forecasting icon sensitivity setting

•Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

•Outdoor temperature and humidity display with MIN/MAX recording

•All MIN/MAX outdoor recordings show date and time received

•All MIN/MAX recordings can be reset

•Can take up to three outdoor transmitters

•LCD contrast setting

•Low battery indicator

•Table standing/ Wall mounting

SETTING UP:

When one transmitter is used

1. First, insert the batteries into the Thermo-hygro transmitter. (see “How to

install and replace batteries in the Thermo-hygro transmitter“).

2. Immediately after and within 2 minutes, insert the batteries into Weather

station (see “How to install and replace batteries in the Weather

station”). Once the batteries are in place, all segments of the LCD will light

up briefly. Following the time as 0:00 and the "weather man" icon will be

displayed. If these are not displayed after 60 seconds, remove the

batteries and wait for at least 10 seconds before reinserting them.

3. After inserting the batteries into the transmitter, the Weather station will

start receiving data from the transmitter. The outdoor temperature/

humidity and the signal reception icon should then be displayed on the

Weather station. If this does not happen after 3 minutes, the batteries will

need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the Temperature Station and the transmitter (see notes

on “Positioning” and “868 MHz Reception”).

When more than one transmitter is used

1. User shall remove all the batteries from the temperature station and

transmitters and wait 60 seconds if setting has been done with one

transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 30 seconds of powering up the first transmitter, insert the batteries to

the Weather Station. Once the batteries are in place, all segments of the

LCD will light up briefly. Following time as 0:00 and the "weather man" icon

will be displayed. If they are not shown in LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity from the first transmitter (channel 1)

should then be displayed on the Temperature station. Also, the signal

reception icon will be displayed. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter immediate after (in 10

seconds after) inserting battery to the weather station.

6. The outdoor temperature and humidity from the second transmitter and the

"channel 2" icon should then be displayed on the Temperature station. If this

does not happen after 2 minute, the batteries will need to be removed from

all the units and reset from step 1.

7. Insert the batteries to the third transmitter immediate after (in 10 seconds

after) inserting battery to the second transmitter.

8. Then within 2 minutes, the channel 3 outdoor data from the third transmitter

will be displayed and the channel icon will shift back to "1" once the third

transmitter is successfully received. If this is not happen, user shall restart

the setting up from step 1.

Note:

After the three transmitters have been set up, user may need to check the

readings displayed on the weather station against those being shown on the

Andere Handbücher für Wireless Weather Station

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology C85845v4 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417BL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9002U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7091UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9016TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology V42 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9125TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-62U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 302-604B Abmessungen

La Crosse Technology

La Crosse Technology WS-7034U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology T84237 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-1913U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V21V3 Abmessungen

La Crosse Technology

La Crosse Technology 308-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7044U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9049 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Abmessungen

La Crosse Technology

La Crosse Technology C83349 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8035 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6206 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung