La Crosse Technology WS-7034U-IT Bedienungsanleitung

WS-7034U-IT

Wireless 915 MHz

Temperature Station

Instruction Manual

TABLE OF CONTENTS

Topic Page

Quick Setup 3-5

Inventory of Contents 6

Detailed Setup Guide

Battery Installation 7

Setting the Time 7-8

Selecting Units of

Measurement 9

Features

Minimum and Maximum

Temperatures 9-10

Resetting Minimum and

Maximum Temperatures 10

Adding additional remote

temperature sensors

(optional)

11-12

Mounting 12-13

Troubleshooting 14-15

Maintenance and Care 16

Specifications 17-18

Warranty Information 19-24

QUICK SETUP

Hint: Use good quality Alkaline

Batteries and avoid rechargeable

batteries.

1. Have the indoor temperature station

and remote temperature sensor 3 to

5 feet apart.

2. Batteries should be out of both

units for 10 minutes.

3. Place the batteries into the remote

temperature sensor first then into

the indoor temperature station.

(All remote temperature sensors must be

started before the indoor temperature

station)

4. DO NOT PRESS ANY BUTTONS

FOR 10 MINUTES.

In this time the indoor temperature

station and remote temperature sensor

will start to talk to each other and the

display will show both the indoor

temperature and an outdoor temperature.

If the indoor temperature station does

not display both temperatures after the

10 minutes please retry the set up as

stated above. After both indoor and

outdoor temperatures are displayed for

10 minutes you can place your remote

temperature sensor outdoors and set

your time.

The remote temperature sensor should

be placed in a dry, shaded area. The

remote temperature sensor has a range

of 330 feet. Any walls that the signal

will have to pass through will reduce

distance. An outdoor wall or window

will have 20 to 30 feet of resistance and

an interior wall will have 10 to 20 feet

of resistance. Your distance plus

resistance should not exceed 330 ft. in a

straight line.

NOTE: Fog and mist will not harm

your remote temperature sensor but

direct rain must be avoided.

To complete the set up of your indoor

temperature station after the 10 minutes

have passed please follow the steps on

pages 8-9.

INVENTORY OF CONTENTS

The indoor temperature station (Figure

The remote temperature sensor

(TX29U) and mounting bracket.

3 each, 1/2” Philips screws.

One strip of double sided adhesive tape.

Instruction Manual and Warranty Card.

ADDITIONAL EQUIPMENT

(not included)

1 Philips screwdriver.

2 Fresh AAA Alkaline batteries.

2 Fresh AA Alkaline batteries

DETAILED SETUP GUIDE

Battery Installation

1. Install 2 AA

batteries in the

remote temperature

sensor. Make sure

they do not spring

free, or start-up

Figure 1

Battery

Cover

problems may occur.

Install 2 AAA

batteries in the

indoor temperature

station. Do not

press any buttons

for at least ten

minutes.

Setting the Time

Press and hold the

“SET” button for 5

second, “12h” will

appear in the TIME

LCD.

Press and release the “MIN/MAX”

button to select either 12h time

(am/pm) or 24h time

Press and release the “SET” button 2

times, the hour will flash in the upper

left corner.

Press and release the “MIN/MAX”

button to set the hours

Press and release the “SET” button to

move to the minute setting

Press and release the “MIN/MAX”

button to set the minutes.

Press and release the “SET” button to

activate the clock.

Note: When in 12h mode, there is only a

“PM” display, which appears under “TIME.”

If there is no display here it is AM. Make

sure you set the time accordingly.

Selecting Units of Measurement

Press and hold the “SET” button for 5

second until “12h” or “24h” appears

in the TIME LCD.

Press and release the “SET” button

again, “°F” will appear in the TIME

LCD.

Press and release the “MIN/MAX”

button to shift between °F and °C.

Press and release the “SET” button

twice to activate settings.

FEATURES

Minimum and Maximum Temperatures

Press and release the “MIN/MAX”

button, “MIN” appears next to the

indoor and remote temperatures.

The recorded minimum temperature is

displayed.

Press the “MIN/MAX” button,

“MAX” appears next to the indoor

and remote temperatures.

The recorded maximum temperature

is displayed.

Press and release the “MIN/MAX”

button to exit min/max mode.

To view optional additional sensors,

press and release the “SET” button

while viewing the minimum or

maximum.

Resetting Min and Max Temperatures

To reset both the minimum and maximum

temperatures—press and hold the

“RESET/+” button for 4 seconds.

Adding Additional Remote

Temperature Sensors (optional)

The WS-7034U-IT is able to receive

signals from 3 different remote

temperature sensors. Following are some

brief instructions for the basic set-up of

remote temperature sensor units with the

WS-7034U-IT. These extra remote

temperature sensors can be purchased

through the same dealer as this unit, or

by contacting La Crosse Technology

directly.

When setting up multiple remote

temperature sensors, it is important to

remove the batteries from all existing

units in operation, then to insert batteries

Andere Handbücher für WS-7034U-IT

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 724-1415BL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-913 3U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7013U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology CA76669 Abmessungen

La Crosse Technology

La Crosse Technology WS-2814U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless 433 MHz Temperature Station... Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83349 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7047TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9210U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9014 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2813U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology ED31411 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Betriebsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9001U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9151U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-450B Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung