La Crosse Technology WS-9611U-IT Bedienungsanleitung

WIRELESS WEATHER STATION

WITH ADVANCED FORECAST ICON

Instruction Manual

Contents

Language Page

_____________________________________________________________

English 1

TABLE OF CONTENTS

Topic Page

Inventory of contents 3

Features 4

Setting up 6

About WWVB 11

Function keys 12

LCD screen 15

Manual settings 17

Sunrise, sunset, sun duration 29

Setting the alarm 29

Weather forecast icons 30

Moon phase icons 35

Indoor temperature and humidity 36

Outdoor temperature 36

MIN/MAX readings and resetting 37

915 MHz Reception 38

Mounting 40

Maintenance & Care 41

Specifications 42

Warranty information 44

FAQ 47

INVENTORY OF CONTENTS

1) Wireless Weather Station WS-9611U-IT

2) Wireless Temperature Sensor (TX29U-IT) and mounting bracket

3) Instruction manual

This product offers: INSTANT TRANSMISSION is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4 seconds!) of all your outdoor data

measured from the sensors: follow your climatic

variations in real

time!

LCD Display

Function Keys

FEATURES:

The Weather clock

FEATURES:

WWVB Radio-controlled time with manual setting option

Time reception ON/OFF (user selectable)

12/24-hour time display

Automatic daylight saving time (DST) updating

Function Keys Foldout Stand

Battery compartment cover

Hanging hole

DST ON/OFF (daylight saving time)

Time zone option ±12 hours

Year, month, date, weekday calendar display

Crescendo alarm with snooze function

Advanced Weather Forecast Icons with 15 combinations of weather icons

Weather tendency indicator

Temperature display with MIN/MAX records and time and date of reception

Indoor and outdoor temperature display in ºF or ºC

Indoor humidity data display as RH% with MIN/MAX records

Can receive up to 3 remote temperature/humidity sensors

Sun rise and sun set for 99 selected US and Canada cities

Moon phase

LCD contrast selectable

LED backlight

Low battery indicator

Wall hanging or table standing

The Wireless Temperature Sensor (TX29U-IT)

Remote transmission of outdoor temperature to

Weather Station by MHz

Water resistant casing

Wall mounting case (Mounting at a sheltered place.

Avoid direct rain and sunshine)

SETTING UP

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install and

replace batteries in the Temperature transmitter“).

2. Immediately after and within 45 seconds, insert the batteries into Weather Clock

(see “Install and replace batteries in the Weather Station”). Once the batteries

are in place, all segments of the LCD will light up briefly. Following the time as

12:00 and the "Weather man" icon will be displayed. If these are not displayed

after 60 seconds, remove the batteries and wait for at least 10 seconds before

reinserting them.

3. After inserting the batteries, the Weather Station will start receiving data from the

transmitter. The outdoor temperature and the signal reception icon should then be

displayed on the Weather Station. If this does not happen after 3 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 915 MHz transmission however, this should under

good conditions be a distance no more than 330 feet (100 meters) between the

final position of the Weather Station and the transmitter (see notes on

“Positioning” and “915 MHz Reception”).

5. Once the remote temperature has been received and displayed on the Weather

Station, the WWVB time (radio controlled time) code reception is automatically

started. This takes typically between 3-5 minutes in good conditions. If after 10

minutes, the WWVB time has not been received, press the SET key to manually

enter a time initially.

When more than one transmitter is used

1. User shall remove all the batteries from the Weather Station and transmitters and

wait for 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the

Weather Station. Once the batteries are in place, all segments of the LCD will light

up briefly. Following time as 12:00 and the Weather man icon will be displayed. If

they are not shown in LCD after 60 seconds, remove the batteries and wait for at

least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be

displayed on the Weather Station. Also, the signal reception icon will be displayed.

If this does not happen after 2 minutes, the batteries will need to be removed from

both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

readings from the first transmitter are displayed on the Weather Station.

Note: User shall insert the batteries into the second transmitter within 10 seconds of

reception of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then

be displayed on the Weather Station. If this does not happen after 2 minute, the

batteries will need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and

outdoor data are displayed on the Weather Station. Then within 2 minutes, the

channel 3 outdoor data from the third transmitter will be displayed and the channel

icon will shift back to "1" once the third transmitter is successfully received. If this

is not happen, user shall restart the setting up from step 1.

Note:

User shall insert the batteries into the third transmitter within 10 seconds of

reception of the second transmitter.

And user may be required to check the displayed readings on the Weather Station

against those shown on the transmitters in order to recognize the Channel No. of

each transmitter.

8. In order to ensure sufficient 915 MHz transmission however, this should under

good conditions be a distance no more than 330 feet (100 meters) between the

final position of the Weather Station and the transmitter (see notes on

“Positioning” and “915 MHz Reception”).

9. Once the remote temperature has been received and displayed on the Weather

Clock, the WWVB time (radio controlled time) code reception is automatically

started. This takes typically between 6-8 minutes in good conditions.

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not

followed as described above. Should transmission problems occur, it is necessary

to remove the batteries from all units and start again the set-up from step 1.

Note:

If after 10 minutes, the Atomic auto-set time (WWVB time) has not been received,

press the SET key to manually enter a time initially.

Daily WWVB reception is attempted at full hour between 12:00 am to 6:00 am. If

the reception is successful, there will no reception attempt until the following day.

When this is successful, the received time will override the manually set time. The

date is also updated with the received time. (Please refer also to notes on “WWVB

Radio controlled Time” and “Manual Time Setting”).

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery.

To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the

transmitter.

2. Insert the batteries, observing the correct polarity (see

marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is because a random security code is assigned

by the transmitter at start-up and this code must be received and stored by the Weather

Station in the first 3 minutes of power being supplied to it.

INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover at the back

of the Weather Station.

2. Insert batteries observing the

correct polarity (see marking).

3. Replace compartment cover.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure

optimum accuracy of these units.

Please participate in the preservation of the environment. Return used

batteries to an authorized depot.

ABOUT WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology—Time and Frequency

Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact

time signal continuously throughout the United States at 60 kHz. The signal can be

received up to 2,000 miles away through the internal antenna in the weather projection

station. However, due to the nature of the Earth’s Ionosphere, reception is very limited

during daylight hours. The wireless weather station will search for a signal every night

when reception is best.

The WWVB radio station receives the time data from the NIST Atomic clock in Boulder,

Colorado. A team of atomic physicists is continually measuring every second, of every

day, to an accuracy of ten billionths of a second per day. These physicists have created

an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-

133 atom in a vacuum. For more detail, visit http://www.boulder.nist.gov/timefreq.htm. To

listen to the NIST time, call (303)499-7111. This number will connect you to an

automated time, announced at the top of the minute in “Coordinated Universal Time”,

which is also known as Greenwich Mean Time (GMT). This time does not follow Daylight

Saving Time changes. After the top of the minute, a tone will sound for every second. It is

possible that your wireless weather station may not be exactly on the second due to the

variance in the quartz. However, the clock will adjust the quartz timing over the course of

several days to be very accurate; under 0.10 seconds per day.

FUNCTION KEYS:

Weather station:

The Weather station has five easy to use function keys: 2 on the left, 2 on the right, and 1

on the top of the unit

SET key (Setting):

Toggle between month, day, & year; weekday, month, & day; seconds; & alarm

time

Press and hold to enter manual setting modes: LCD contrast, time zone, daylight

saving time ON/OFF, time reception ON/OFF, 12/24 hour display, manual time

SET ke

MIN

MAX ke

LM key

CH/ + key

SNOOZE/ SUN key

setting, calendar setting, sun rise/set city selection, snooze function, temperature

°F or °C, and weather icon sensitivity setting

Reset MIN/MAX values (channels 1, 2, & 3)

Stop the alarm during alarm ringing

Stop snooze mode

Back-light on

CH/ + key

Increase value in all setting modes

Stop the alarm during alarm ringing

Press and release to toggle between the outdoor transmitter 1, 2 and 3 (if more

than 1 transmitter is used)

Stop snooze mode

Backlight on

ALM key (alarm)

Enter/exit the alarm setting mode

Active/de-active the alarm time (even inside snooze mode)

Stop the alarm during alarm ringing

Backlight on

MIN/ MAX

Press and release to toggle between MIN/MAX and current temperature/humidity

values for selected outdoor temperature channel

Stop the alarm during alarm ringing

Stop snooze mode

Backlight on

SNOOZE/ SUN key

Active/de-active snooze function

Exit the setting modes

Toggles between sun rise time (sun icon with arrow pointing up), sun set time (sun

icon with arrow pointing down), and sun duration (sun icon with arrows pointing up

and down)

To switch on the backlight

LCD SCREEN AND SETTINGS:

For better distinctness the LCD screen is split into 5 sections displaying the information

for time, date, weather forecast, indoors and outdoors.

Indoor Relative

Humidity %

Weather

Tendency icon

WWVB Towe

Icon (for time

reception)

Time

Calenda

Weather Forecast

icon (Weather boy)

Indoor

Temperature

Outdoor

Temperature

Outdoor

Reception

Signal

Number showing

Transmitter unit

larm icon

Moon phase

displa

Sunrise/ sunset

displa

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

LCD contrast setting

Time zone setting

Daylight Saving Time (DST) ON/OFF

Time reception ON/OFF setting

12/24-Hour setting

Manual time setting

Calendar setting (Year, Day, & Month)

Sunrise/ Sunset city location

Snooze setting

°F/°C setting

Weather forecasting icon sensitivity setting

LCD CONTRAST SETTING

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD

5):

flashing

1. Press and hold the SET key until the digit starts flashing.

2. Use the CH/+ key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time

Zone setting.

TIME ZONE SETTING:

The time zone default of the wireless weather station is EST –5. To set a different time

zone:

1. The current time zone value starts flashing.

2. Use the CH/+ key to set the time zone. The range runs from 0 to -12 and then runs

from +12 back to 0 in consecutive 1-hour intervals. The U.S. time zones are

(negative numbers) –5h(EST), -6h(CST), -7h(MST) and –8h(PST) zones.

3. Confirm with the SET key and enter the DST (Daylight Saving Time) setting.

flashing

DAYLIGHT SAVING TIME (DST) ON/OFF SETTING

Note: The DST default is “ON”, meaning that the received time will automatically be

adjusted according to Daylight Saving Time in the spring and fall. For areas that do not

recognize DST changes turn the DST “OFF”.

The default is ON for the daylight saving time setting

1. DST starts flashing in the top left black bar and “on” flashing in the bottom left

section above the city selection.

2. Use the CH/+ key to toggle between and select on or off.

3. Confirm selection with the SET key and enter the Radio Controlled Time

Reception ON/OFF Setting.

Daylight

Saving Time

Daylight

Saving Time “on”

TIME RECEPTION ON/OFF SETTING

In area where reception of the WWVB time is not possible, the WWVB time reception

function can be turned OFF. The clock will then work as a normal Quartz clock. (Default

setting is ON).

1. ON will start flashing on the LCD.

2. Use the CH/+ key to turn OFF the time reception function.

3. Confirm with the SET key and enter the 12/24-HOUR setting.

Note:

If the Time Reception function is turned OFF manually, the clock will not attempt

any reception of the WWVB time as long as the Time Reception OFF function is

activated.

The Time Reception and the “WWVB” icons will not be displayed on the LCD.

Radio

Controlled Clock

WWVB

Reception is “ON”

12/24 HOUR TIME DISPLAY SETTING

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default

12-Hour).

1. Use the CH/+ key to toggle between 12H or 24H

2. Confirm with the SET key and enter the Manual time setting.

Note: When 24h mode display is selected, the calendar format will be date and month

display. When 12h mode display is selected, the calendar format will be month

and date display.

MANUAL TIME SETTING

In case the wireless weather station cannot detect the WWVB-signal (for example due to

disturbances, transmitting distance, etc.), the time can be manually set. The clock will

then work as a normal Quartz clock.

flashing

Minutes (flashing)

Hours (flashing)

Year

"Date. Month." (for 24h time display)

"Month. Date." (for 12h time display)

1. The hour digit will start flashing.

2. Use the CH/+ key to set the hour.

3. Press again the SET key to set the minutes. The minute digits start flashing.

4. Use the CH/+ key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day even if the

time has been manually set and if the WWVB time reception function has been set ON.

When it does receive the signal, it will change the manually set time into the received

time. During reception attempts the WWVB tower icon will flash. If reception has been

unsuccessful, then the WWVB tower icon will not appear but reception will still be

attempted the following hour.

CALENDAR SETTING

The date default of the wireless weather station is 1. 1. in the year 2005. Once the radio-

controlled time signals are received, the date is automatically updated. However, if the

signals are not received, the date can also be set manually:

The year starts flashing. Use the CH/+ key to set the year.

1. Press the SET key again to confirm and to enter the month setting. The month

starts flashing.

2. Use the CH/+ key to set the month.

3. Press the SET key again to confirm and to enter the date setting mode. The date

starts flashing.

4. Use the CH/+ key to set the date.

5. Confirm all calendar settings with the SET key and enter the City Setting for Sun

rise/ Sun set/ Sun duration.

CITY SELECTION

The Wireless Weather Station will display the Sun rise/ sun set/ or sun duration for 99

selected US and Canada cities:

Code City, State Code City, State Code City, Stat

Alabama Kentucky Oklahoma

MGM Montgomery LEX Lexington OKC Oklahoma City

MOB Mobile Louisiana TUL Tulsa

Arkansas NEW New Orleans Oregon

LIT Little Rock SHV Shreveport MFR Medford

Arizona Massachusetts

PDX Portland

PHX Phoenix BOS Boston Pennsylvania

California Maine CXY Harrisburg

FAT Fresno AUG Augusta PIT Pittsburgh

LAX Los Angeles CAR Caribou SCR Scranton

ROD Redding Michigan South Carolina

SAN San Diego DET Detroit CHS Charleston

SFO San Francisco PZQ Rogers city CUB Columbia

Colorado Minnesota South Dakota

DEN Denver DLH Duluth FSD Sioux Falls

DRO Durango INL International Falls RAP Rapid City

GJT Grand Junction Missouri Tennessee

PUB Pueblo JEF Jefferson City MEM Memphis

District of Columbia Mississippi BNA Nashville

DCA Washington D.C. JAN Jackson DKX Knoxville

Florida Montana Texas

JAX Jacksonville BIL Billings AMA Amarillo

MIA Miami HLN Helena AIN Austin

ORL Orlando North Carolina BRO Brownsville

TLH Tallahassee CLT Charlotte DFW Dallas/Ft. Worth

TPA Tampa RDU Raleigh ELP El Paso

Georgia North Dakota HOU Houston

ATL Atlanta BIS Bismarck ODO Odessa

Hawaii FAR Fargo SAT San Antonio

HNL Honolulu Nebraska Utah

Iowa LNK Lincoln SLC Salt Lake City

DSM Des Moines SNY Sidney

irginia

DVN Davenport New Hampshire LYH Lynchburg

Idaho CON Concord ORF Norfolk

BOI Boise New Jersey

ermont

Illinois TTN Trenton BTV Burlington

ORD Chicago New Mexico Washington

SPI Springfield ABQ Albuquerque SEA Seattle

Indiana Nevada SFF Spokane

EVV Evansville LAS Las Vegas West Virginia

IND Indianapolis RNO Reno CRW Charleston

Kansas New York Wisconsin

DDC Dodge City BUF Buffalo GRB Green Bay

K32 Wichita JFK New York City LSE La Crosse

TOP Topeka SYR Syracuse West Virginia

Ohio CRW Charleston

CLE Cleveland Wyoming

CMH Columbus CPR Casper

CANADA CITY LIST

Code City Code City Code City

ALB Cal

OTT Ottawa QUE Quebec

VAN Vancouver WIN Winnipeg TOR Toronto

1. The city abbreviation starts flashing.

2. Use the CH/+ key to toggle through the 99 cities and select city closest to your

location.

3. Press the SET key to confirm selection and enter the Snooze Setting.

Note: to view the sunrise, sunset, sun duration of selected city, please see “ Sunrise,

Sunset, Sun duration” below.

SNOOZE SETTING:

The snooze time can be set from OFF to a maximum time of 30 minutes (default is 10

minutes):

flashing

1. Use the CH/+ key to set the snooze time. Each pressing of the key will increase

the snooze time by 5 minutes. The snooze can also be set OFF when the OFF

digit is being displayed.

2. Confirm with the SET key and enter the Temperature setting.

Note: If the snooze time has been set OFF, the snooze function will not be activated.

°F/°C TEMPERATURE UNIT SETTING

The temperature display can be selected to show temperature data in °F or °C (Default

°F):

1. Use the CH/+ key to toggle between °F or °C.

2. Confirm with the SET key and enter the Weather forecasting icon sensitivity

setting.

WEATHER FORECASTING ICON SENSITIVITY SETTING

For locations with rapid changes of weather conditions, the weather icons can be set to a

different level for faster display of weather conditions.

flashing

1. The current sensitivity value will start flashing

2. Use the CH/+ key to set the weather sensitivity level. There are 3 levels of setting:

1, 2and 3; level 1is the most sensitive setting for high humidity areas; level 3is

the slowest recording setting for arid areas (default setting is 2).

3. Confirm with the SET key and exit the Manual settings.

SUNRISE, SUNSET AND SUN DURATION

To view Sunrise, Sunset and Sun Duration of selected city:

1. Press the SNOOZE key once to view the sunrise time.

2. Press a second time the SNOOZE key to view the sunset time.

3. Press a third time the SNOOZE key to view the sun duration.

flashing flashing

ALARM SETTING:

larm icon

flashing

Press the

SNOOZE/

SUN key to

toggle

between the

sunrise,

sunset, and

sun duration

time

City Code

Sun Rise Icon &

Sun Rise Time fo

Selected city

Sun Set Icon & Sun Se

Time for Selected cit

Sun Duration Icon &

Sun Duration (in hours)

for Selected cit

The alarm time can be set when pressing the ALM key:

1. Press the ALM key until the alarm hour digits flash.

2. Use the CH/+ key to set the alarm hour.

3. Press the ALM key again so the minute digits flash.

4. Use the CH/+ key to set the alarm minutes.

5. Confirm with the ALM key, or SNOOZE key and exit the Alarm setting.

Note:

The maximum alarm ring duration is 2 minutes. The alarm setting can be activated or

deactivated manually by pressing the ALM key. The alarm icon will be displayed on the

LCD if the setting is activated

SNOOZE SETTING AND STOPPING THE ALARM:

The snooze function can be activated when the alarm is ringing by pressing the SNOOZE

key. However the snooze will only be activated when the snooze time is set other than

OFF in snooze setting.

When the alarm is snoozing, the alarm icon will start flashing indicating that the alarm is

active but is in Snooze mode. To stop the snooze function when it is in snooze period,

press and release any of the SET, MIN/MAX, or CH/+ keys.

To turn the alarm on and off, press and release the ALM key. The alarm icon will appear

when the alarm is activated and won’t show when the alarm is deactivated

WEATHER FORECAST ICONS:

The weather forecast can be displayed as follow:

Note: After initial set up, allow 48-60 hours for your Wireless Weather Station to

acclimate to the local pressure.

For every sudden or significant change in the air pressure, the weather icons will update

accordingly to represent the change in weather. If the icons do not change, then it means

either the air pressure has not changed or the change has been too slow for the wireless

weather station to register. However, if the icon displayed is a sun or raining cloud, there

will be no change of icon if the weather gets any better (with sunny icon) or worse (with

rainy icon) since the icons are already at their extremes.

The icons displayed forecasts the weather in terms of getting better or worse and not

necessarily sunny or rainy as each icon indicates. For example, if the current weather is

cloudy and the rainy icon is displayed, it does not mean that the product is faulty because

it is not raining. It simply means that the air pressure has dropped and the weather is

expected to get worse but not necessarily rainy.

Sunny Sun w/ Clouds Rainy

Note:

After setting up, readings for weather forecasts should be disregarded for the next 48-60

hours. This will allow sufficient time for the wireless weather station to collect air pressure

data at a constant altitude and therefore result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather

forecasting feature is estimated to have an accuracy level of about 75% due to the

varying areas the wireless weather station has been designed for use. In areas that

experience sudden changes in weather (for example from sunny to rain), the wireless

weather station will be more accurate compared to use in areas where the weather is

stagnant most of the time (for example mostly sunny).

If the wireless weather station is moved to another location significantly higher or lower

than its initial standing point (for example from the ground floor to the upper floors of a

house), discard the weather forecast for the next 48-60 hours. By doing this, the wireless

weather station will not mistake the new location as being a possible change in air-

pressure when really it is due to the slight change of altitude.

WEATHER TENDENCY INDICATORS

Working together with the weather icons is the weather tendency indicators (located on

the right side of the weather icons). When the indicator points upwards, it means that the

air-pressure is increasing and the weather is expected to improve, but when indicator

points downwards, the air-pressure is dropping and the weather is expected to become

worse.

Taking this into account, one can see how the weather has changed and is expected to

change. For example, if the indicator is pointing downwards together with cloud and sun

icons, then the last noticeable change in the weather was when it was sunny (the sun

icon only). Therefore, the next change in the weather will be cloud with rain icons since

the indicator is pointing downwards.

Note:

Once the weather tendency indicator has registered a change in air pressure, it will

remain permanently visualized on the LCD.

ADVANCED FORECAST ICONS:

A total of 15 Advanced Forecast icon combinations can be displayed depending on

outdoor temperature and air pressure recorded from outdoor transmitter 1 only.

Once the temperature and air pressure are recorded, the weather station automatically

display the appropriate Weather Boy icon as an indication of current weather and

suggestion for dressing up accordingly.

The icon will remain permanently visualized on the LCD once it registered a change in

temperature and air pressure.

78.8ºF

(26C) 66.2 – 78.6ºF

(

–

25.9C

)

50 - 66ºF

(

10-18.9C

)

32 – 49.8ºF

(0 – 9.9C) < 32ºF

(0C)

Sunny

Cloudy

Rainy

Full Moon

Large Waning Gibbous

Small Waning Gibbous

Last Quarter

Large Waning Crescent

Small Waning Crescent

New Moon

Small Waxing Crescent

Large Waxing Crescent

First Quarter

Small Waxing Gibbous

Large Waxing Gibbous

THE MOON PHASE

The Moon icon of the Weather station will also display 12 different Moon phases

according to the set calendar.

Note: In the southern hemisphere, the phases of the moon are same but the shape of the

moon is mirror inverted.

The moon phase for any date may be found by selecting a different date through the sun

rise/set moon rise/set programming section.

DISPLAY OF INDOOR TEMPERATURE AND HUMIDITY READING:

The indoor temperature and humidity data are automatically updated and displayed on

the fourth section of the LCD.

DISPLAY OF OUTDOOR TEMPERATURE:

The last LCD section shows the outdoor temperature, a reception symbol and a channel

number under the temperature will also show if more than one transmitter has been used.

Indoor

Temperature

Minimum icon

Indoor Relative

Humidity %

TOGGLING AND RESETTING THE MIN/MAX READINGS:

1. To toggle between the MIN/MAX data for indoor temperature and humidity and

outdoor temperature press and release the MIN/MAX key.

Once to show the MAX outdoor temperature data with the recorded time and date

Twice to show the MIN outdoor temperature data with the recorded time and date

Three times to show the MAX indoor temperature and humidity data with the

recorded time and date

Four times to show the MIN indoor temperature and humidity data with the

recorded time and date

A five times to return to normal display with current data.

2. To reset any MIN or MAX data, press and hold the SET key for about 4 seconds.

This will reset the currently displayed MIN or MAX recorded data to the current

temperature and humidity readings.

Transmitter identification No.

(only shown when more than

one transmitter is used) Maximum icon

Outdoor

temperature

Outdoor Reception

Symbol

Note: It is required to reset the outdoor MIN/MAX temperature records of different

channels separately (if there are more than 1 wireless sensor used).

In normal display mode, press the CH/ + button to select a channel. The channel ID will

be displayed under the outdoor temperature reading.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting mode anytime during the manual setting modes, press the

SNOOZE key anytime or wait for automatic timeout. The mode will return to normal time

display.

LED BACKLIGHT

The backlight is automatically switched ON when any keys are pressed. The backlight

will be switched on for approximately 10 seconds before automatically switching OFF.

ABOUT THE OUTDOOR WIRELESS TEMPERATURE SENSOR

The range of the temperature sensor may be affected by the temperature. At cold

temperatures the transmitting distance may be decreased. Please bear this in mind when

positioning the sensor. The battery life may be reduced as well at cold temperatures.

CHECKING FOR 915MHz RECEPTION

If the outdoor temperature data is not being received within 3 minutes after setting up (the

display shows “- -. - °F” and “- -%” on the outdoor section of the wireless weather station

after 3 attempts during normal operation), please check the following items:

1. The distance of the Weather clock or transmitter should be at least 1.5 to 2

meters away from any interfering sources such as computer monitors or TV sets.

2. Avoid positioning the weather station onto or in the immediate proximity of metal

window frames.

3. Using other electrical products such as headphones or speakers operating on the

same signal frequency (915MHz) may prevent correct signal transmission and

reception.

4. Neighbors using electrical devices operating on the 915MHz signal frequency can

also cause interference.

Note:

When the 915 MHz-signal is received correctly, do not re-open the battery cover of either

the temperature sensor or wireless weather station, as the batteries may spring free from

the contacts and force a false reset. Should this happen accidentally then reset all units

(see “Setting up” above) otherwise transmission problems may occur.

The transmission range is approximately 330 feet (100 meters) from the temperature

sensor to the wireless weather station (in open space). However, this depends on the

surrounding environment and interference levels. If no reception is possible despite the

observation of these factors, all system units have to be reset (see “Setting up” above).

POSITIONING

WEATHER STATION:

The Weather station comes complete with a foldout stand that gives the option of table

standing or wall mounting.

To wall mount:

1. Fix a screw into the desired wall, leaving the head extended out

the by about 0.2”(5mm).

2. Using the Weather clock’s hanging hole, carefully hang it onto

the screw.

Note: Always ensures that the unit locks onto the screw head before

releasing.

POSITIONING THE WIRELESS TEMPERATURE SENSOR:

The Transmitter is supplied with a holder that may be attached

to a wall with the two screws supplied. The Transmitter can

also be position on a flat surface by securing the stand to the

bottom to the Transmitter.

Andere Handbücher für WS-9611U-IT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 724-1409V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology K86319 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T83646v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V15-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7091 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology T85258 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 919-186-60WH Abmessungen

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C85845 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9730IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather Direct WD-3308 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1415BL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-450B Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9611U-IT Handbuch

La Crosse Technology

La Crosse Technology C79790V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-D1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA80550 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7208U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung