La Crosse Technology WS-9137 Bedienungsanleitung

WIRELESS 868 MHz WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this Weather Station with wireless 868 MHz

transmission of outdoor temperature and display of indoor temperature,

weather forecast icons and weather tendency indicators It is further featuring

a DCF-77 radio controlled clock and alarm function With four easy to use

function keys, this innovative product is ideal for use in the home or office

« Instant Transmission+» is the up and coming state-of-

the-art new wireless transmission technology, exclusively

designed and developed by L CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor

data measured from the transmitters: follow your climatic

variations in real-time!

FEATURES:

T e Weat er Station

•

DCF-77 Radio controlled time function with manual time setting options

•

DCF time reception ON/OFF

•

24 hour display

•

Alarm function with snooze

•

Time zone +/- 12 hours

•

Temperature display in degree Celsius (°C)

•

Indoor and outdor temperature with MIN/MAX records

•

Manual reset of MIN/MAX records

•

3 weather forecast icons with weather tendency indicator

•

Wireless transmission at 868 MHz

•

Signal reception interval at 4 seconds

•

Low battery indicators

•

Wall mounting or table standing (foldout stand)

LCD

Display

Function

Keys

Foldout stand

Battery

compartment

cover

Hanging hole

T e Outdoor Temperature Transmitter

•

Remote transmission of outdoor

temperature to Weather station by 868 MHz

signals

•

Shower proof casing

•

Wall mounting and table-standing

SETTING UP:

Note: T is weat er station receives only one outdoor transmitter.

1 First, insert the batteries into the Temperature transmitter (see “Install

and replace batteries in t e Temperature transmitter“)

2 Within 30 seconds, insert the batteries into Weather station (see “Install

and replace batteries in t e Weat er station”) Once the batteries are

in place, all segments of the LCD will light up briefly Then the time (as

0:00) and the weather icon will be displayed If these are not displayed

after 60 seconds, remove the batteries and wait for at least 30 seconds

before reinserting them

3 After inserting the batteries, the Weather station will start receiving data

from the transmitter The outdoor temperature and the signal reception

icon should then be displayed on the Weather station If this does not

happen after 3 minutes, the batteries will need to be removed from both

units and reset from step 1

4 In order to ensure sufficient 868 MHz transmission, this should under

good conditions be a distance no more than 100 meters between the

final position of the Weather Station and the transmitter (see notes on

“Mounting” and “868 MHz Reception”)

5 Once the remote temperature has been received and displayed on the

Weather station, the DCF time (radio controlled time) code reception is

automatically started This takes typically between 3-5 minutes in good

conditions

Note:

Daily DCF reception is done at 02:00 and 03:00 every day If the reception at

03:00 is not successful, then at 04:00 and 05:00 and 06:00 there are other

tries, until one is successful If the reception at 06:00 is still not successful,

then the next try takes place at 02:00 next day

If reception is successful, the received time will override the manually set time

(Please refer also to notes on “DCF-77 Radio Controlled Time” and “Manual

Time Setting”)

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 2 x AA, IEC LR6, 1 5V batteries When batteries

need to be replaced, the low battery icon will appear on the LCD To install

and replace the batteries, please follow the steps below:

1 Lift up the battery compartment

cover

2 Insert batteries observing the

correct polarity (see marking)

Replace compartment cover

HOW TO INSTALL AND REPLACE BATTERIES IN THE

TEMPERATURE TRANSMITTER

The Temperature Transmitter uses 2 x AAA, IEC LR3, 1 5V

battery To install and replace the batteries, please follow the

steps below:

1 Remove the battery compartment cover at the back of

the transmitter

2 Insert the batteries, observing the correct polarity (see

marking)

3 Replace the battery compartment cover on the unit

Note:

In the event of changing batteries in any of the units, all units need to be reset

by following the setting up procedures This is because a security code is

assigned by the transmitter at start-up and this code must be received and

stored by the Weather station in the first 3 minutes of power being supplied to

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to

ensure optimum accuracy of these units (Battery life See

Specifications below)

Please participate in t e preservation of t e environment.

Return used batteries to an aut orised depot.

DCF-77 RADIO CONTROLLED TIME

The time base for the radio-controlled time is a Cesium Atomic Clock operated

by the Physikalisch Technische Bundesanstalt Braunschweig which has a

time deviation of less than one second in one million years The time is coded

and transmitted from Mainflingen near Frankfurt via frequency signal DCF-77

(77 5 kHz) and has a transmitting range of approximately 1500 km Your

radio-controlled Weather Station receives this signal and converts it to show

the precise time in summer or wintertime

The quality of the reception depends greatly on the geographic location In

normal cases, there should be no reception problems within a 1500km radius

of Frankfurt

After the outdoor transmitter reception is completed in initial setup, the DCF

tower icon on the clock display will start flashing This indicates that the clock

has detected that there is a radio signal present and is trying to receive it

When the time code is received, the DCF tower becomes permanently lit and

the time will be displayed

If the tower icon flashes, but does not set the time or the DCF tower does not

appear at all, then please take note of the following:

•

Recommended distance to any interfering sources like computer

monitors or TV sets is a minimum of 1 5 - 2 meters

•

Within ferro-concrete rooms (basements, superstructures), the received

signal is naturally weakened In extreme cases, please place the unit

close to a window and/ or point its front or back towards the Frankfurt

transmitter

•

During nighttime, the atmospheric disturbances are usually less severe

and reception is possible in most cases A single daily reception is

adequate to keep the accuracy deviation below 1 second

FUNCTION KEYS:

Weat er station:

The weather station has four easy to use function keys

SET key

•

Press the key to enter manual setting modes: Time zone, Time

reception ON/OFF and Manual time

•

Stop the alarm

+ key

•

To make adjustment for various settings

key ALARM key

SET

key

MIN/MAX

RESET key

Outdoor Reception

Signal icon*

Max and Min indoor

temperature records

Max and Min outdoor

temperature records

•

Stop the alarm

ALARM key

•

Press and hold to enter the alarm setting mode

•

Press the key to switch the alarm ON/ OFF

•

Stop the alarm

MIN/MAX RESET key

•

Press and hold to reset the MIN/MAX temperature records

•

Activate the snooze

•

Exit manual setting modes

LCD SCREEN AND SETTINGS:

Time

Indoor

Temperature in °C Outdoor

Temperature in °C

Weather tendency

indicator

Weather forecast

icon

Low battery indicator

(weather

station)

Low battery indicator

(transmitter)

Radio controlled time

reception icon

Alarm icon

* When the outdoor signal is successfully received by the Weather Station,

this icon will be switched on (If not successful, the icon will not be shown in

LCD) So user can easily see whether the last reception was successful (icon

on) or not (icon off)

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

•

Time zone

•

Time reception DCF ON/OFF

•

Manual time

Press the SET key and hold down for a few seconds to enter the setting mode

TIME ZONE SETTING:

The time zone default is "0” hour To set a different time zone:

1 The current time zone value starts flashing

2 Use the + key to set the time zone The range runs from 0, -1, -2…

-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals

3 Confirm with the SET key and enter the Time reception On/Off

setting

Time zone (flashing)

Minutes (flashing)

Hours (flashing)

TIME RECEPTION ON/OFF SETTING

In area where reception of the radio-controlled time (DCF time) is not possible,

the time reception function can be turned OFF The clock will then work as a

normal Quartz clock (Default setting is ON)

1 “On” will start flashing on the LCD

2 Use the + key to turn OFF the time reception function if necessary

3 Confirm with the SET key and enter the Manual time setting

Note:

If the Time Reception function is turned OFF manually, the clock will not

attempt any reception of the radio-controlled time (DCF time) as long as the

Time Reception OFF function is activated The Time Reception icon and the

DCF icon will not be displayed on the LCD

MANUAL TIME SETTING

In case the Weather station is not able to detect the radio-controlled time

(DCF time) signal (due to disturbances, transmitting distance, etc ), the time

can be manually set The clock will then work as a normal Quartz clock

flashing

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology S98642 Betriebsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1517 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6812 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9001U Bedienungsanleitung

La Crosse Technology

La Crosse Technology SW402 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9031U Bedienungsanleitung

La Crosse Technology

La Crosse Technology K86319 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1451 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9711U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V21-WTH Konfigurationshandbuch

La Crosse Technology

La Crosse Technology 327-1417V2 Abmessungen

La Crosse Technology

La Crosse Technology Weather Direct WD-3308 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1415BL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7090U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 082616 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-2810U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS2307 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA87092 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7054U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA79103v2 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung