La Crosse Technology WS2307 Bedienungsanleitung

Operation Manual

Professional Remote Weather Station

This Operation Manual is part of this product and should be kept

in a safe place for future reference. It contains important notes

on setup and operation.

Please visit our web site www.heavyweather.info for downloads

of complete instruction manuals and the most current version of

the 'Heavy Weather' software.

Table of Contents

1. Introduction

2. Intended use

Weather Station

System requirements for PC use

Features of the base station

Features of the thermo-hygro sensor

Features of the wind sensor

Features of the rain sensor

3. Safety Notes

4. Packaged contents

5. Setting up

6. Operation using cable connection or wireless 433MHz

7. LCD overview

8. Function test

9. Mounting

10. Resetting & factory settings

11. Function description

12. Operation keys

13. Basic programming modes

14. MIN/MAX programming modes

15. Alarm programming modes

16. Auto-memory for stored values

17. Accessories: extensions cables

18. Changing batteries

19. Interference and problems with operation

20. Transmission range

21. Cleaning and maintenance

22. Specifications

WEATHER STATION

433MHZ

WIRELESS

1. Introduction

Thank you for purchasing this Professional Remote Weather Station.

Designed for everyday use, the weather station will prove to be an

asset of great value for your personal use in the home or office.

Please read this instruction manual thoroughly to fully understand the

features and functions so that you can enjoy the safe and correct

operation of this unique product.

2. Intended Use

Weather Station

The base station measures the indoor environment of its surrounding

area and receives weather data from the following three outdoor sen-

sors:

1) Thermo-Hygro Sensor

2) Wind Sensor

3) Rain Sensor

The received data is continuously updated to bring you the latest

weather information on the base station’s LCD. The thermo-hygro

sensor is the main data communication unit since both the wind and

rain sensors are connected to the thermo-hygro sensor for operating

power and rely on it to communicate to the base station. Weather

data sent from the thermo-hygro sensor can be done by wireless

433MHz transmission (up to 25 meters in open space) or by cable

connection.

Using the enclosed 2 meter computer cable and CD-ROM, you can

install the Heavy Weather software to your PC and upload all the

received weather data from the base station. Access the latest

weather information from your PC and upload up to 175 sets of re-

corded weather data by the base station and generate useful statis-

tics and charts onto your spreadsheets (175 sets of data is stored in

the base even if the PC is switched OFF). The software itself does

not set any limits as to how many data sets that can be transferred to

PC.

This weather station is designed to work easily with your PC. There

are tedious requirements to turn your PC ON or OFF, simply connect

and disconnect the PC cable at any time.

System Requirements for PC use:

The minimum system requirement for use of this “Heavy Weather”

software is:

Operating system: Windows 98 or above

Processor: Pentium 166 MHz or above

RAM: 32MB of RAM or above

Hard disk: 20MB free space

CD-ROM drive

For full details on operation and installation of the “Heavy Weather”

software refer to the PC manual in PDF format on the CD-ROM.

Features of the base station:

•Receives and displays the DCF77 radio controlled time and date

•Display of extensive weather data, in all cases with programmable

alarm functions for certain weather conditions as well as records of

all minimum and maximum values along with time and date of their

recordings

•Indoor and outdoor temperature and relative humidity displays in

degrees Fahrenheit or Celsius (user selectable)

•Indoor and outdoor relative humidity displays

•Air pressure reading in inHg or hPa, absolute or relative (user select-

able)

•Detailed display of rainfall data in 1 hour, 24 hours, total since last

reset (user selectable in mm or inch)

•Wind speed in mph, km/h, m/s, knots or Beaufort (user selectable)

•Wind direction display with LCD compass as well as numerical (e.g.

225° ) and abbreviated characters (e.g. SW)

•Wind chill temperature display

•Dew point temperature display

•Weather forecast display by weather icons (sunny, cloudy, rainy)

•Weather tendency indicator

•Storm warning alarm

•LED back light

•Simultaneous display of all weather data with individual settings by

the user

•COM port for easy connection to your PC

•All the weather data from the base station and up to 175 sets of

weather history data with user adjustable measuring intervals can be

recorded and uploaded to your PC

Features of the Thermo-Hygro Sensor

The thermo-hygro sensor measures the outdoor temperature and

relative humidity. It also collects the readings from the rain and wind

sensors before transmitting the data to the base station by wireless

433MHz or by the 10 meter cable included in this set.

Features of Wind sensor

The wind sensor measures wind speed and wind direction and sends

the data to thermo-hygro sensor which in turn transmits the data to

the base station. Operating power is taken from the thermo-hygro

sensor using a 10 meter cable connection.

Features of Rain sensor

The rain sensor measures the rainfall and sends the data to thermo-

hygro sensor which in turn transmits the data to the base station.

Operating power is taken from the thermo-hygro sensor by a 10 meter

cable connection.

3. Safety Notes

•Damage caused by failure to comply with this instruction manual will

invalidate any guarantee! The manufacturer and supplier will not be

held liable for actions due to failure to comply with this instruction

manual or from data inaccuracies that may occur with this product!

•In case of harm or damage to a person or property caused by im-

proper handling or failure to comply with this instruction manual, the

manufacturer and supplier cannot be held liable.

•For reasons of safety and operation, alterations to this device are

strictly prohibited.

•To operate the weather station, use only supplied adaptor and batter-

ies of the recommended type.

•Do not leave used-up batteries in the device as these may corrode

and release chemicals that may damage the unit.

•Inserting batteries in an incorrect polarity will cause damage to this

product.

•This product is not a toy kept out of the reach of children.

•Do not depose new or used batteries to fire as they may explosion or

release dangerous chemicals.

•This product is not to be used for medical purposes or for public

information.

4. Packaged Contents

Before setting up, carefully unpack the contents onto a table or flat

surface and check that the following are complete:

Item:

Consisting of:

Fittings:

Illustration:

Base

Station

•Main unit

•AD/DC 230V power

Adaptor -optional use

(included)

Thermo-

Hygro

Sensor

•Main unit

•Rain protection

cover

•10 meter cable -

optional connection to

the base station (in-

cluded)

•Wall mounting screws

•Plastic anchors for

screws

Wind

Sensor

•Main unit with

wind vane

•10 meter cable

(already at-

tached to the

main unit)

•Mast holder

•2 x U-bolts for mast

holder

•4 x Washers

•4 x Nuts

•1 x screw (to fix main

unit to the mast holder

Rain

Sensor

•Main unit (base

and funnel)

•10 meter cable

(already at-

tached to the

main unit)

Heavy

weather

soft-

ware

CD-Rom format

(English, Ger-

man and French

languages only)

•2 meter PC cable for

PC connection -op-

tional use (included)

Battery compartment

Socket for

Adaptor

5. Setting up

Firstly, choose to use the adaptor (included in this set) or bat-

teries for operation. Both these methods allow for operation of

using wireless 433MHz transmission or cable connection be-

tween the base station and the sensors and setting up for both

methods is as follows:

Base Station:

Setting up using batteries:

Important: To avoid operating problems, please take note of bat-

tery polarity if inserting any batteries

1) Pull away the rain cover of the thermo-hygro sensor to reveal the

three sockets (for the wind sensor, rain sensor and the base sta-

tion)

2) Connect the attached cables of wind and rain sensors to the

corresponding sockets of the thermo-hygro sensor by clicking

them into place

3) Open the battery cover of the thermo-hygro sensor located below

the three sockets and insert 2 x AA, IEC LR6, 1.5V batteries and

close the cover

4) Open the base station’s battery cover located at the back of the

unit and insert 3 x AA, IEC LR6, 1.5V batteries into the battery

compartment and close the battery cover

Socket for

Thermo-Hygro

Sensor

PC COM

Port

Battery

Compartment

Battery Cover

Thermo-Hygro Sensor

Sensor sockets

Setting up using the AC adaptor:

1) Power up all the sensors as described in setting up using batter-

ies above

2) Using the AC adaptor (included), plug it into the mains outlet and

power up the base station by inserting the adaptor jack into the

6.0V DC socket located on the side of the base station

Every time the thermo-hygro sensor is powered up (for example after

a change of batteries), a random security code is transmitted and this

code must be synchronized with the base station to receive weather

data.

When the base station is powered up, a short beep will sound and all

LCD segments will light up for about 5 seconds before it enters into a

15 minute learning mode to learn the sensors security code. After the

learning mode (or by pressing the MIN/MAX key at anytime), the base

station will start the DCF77 radio controlled time reception.

Note for DCF77 Radio Controlled Time:

The time and date display is based on the signal provided by a highly

accurate Caesium atomic clock operated by the Physikalisch Tech-

nische Bundesamt in Braunschweig (Germany). This radio-controlled

clock does not only provide for the weather station’s time and date

display but also functions as the time source for all of this weather

station’s memory and history values using time and date information.

LCD backlight:

When using the power adaptor, the LCD backlight is switched on

continuously. Under battery operation, the LCD backlight is switched

on for 15 seconds intervals when any key is pressed.

6. Operation using cable connection or wireless 433MHz

Cable Connection:

Using this method of operation will provide interference free transfer

of the weather data from the sensors to the base station. The data

sending interval from the sensors to the base station will also be more

frequent compared to using 433MHz transmission and will result in

higher power consumption. Therefore batteries will have a shorter life

span for cable connection compared to using 433MHz.

To operate using cable connection, simply use the enclosed 10 meter

cable and connect the thermo-hygro sensor to the base station. Once

the connection is detected, the base station will automatically con-

tinue reading the data from the sensor.

The user may at any time switch from cable connection to using

433MHz (or vice versa) by simply disconnecting (or connecting) the

cable from the base station to the sensor. When the base station

detects no cable connection to the sensors, the existing data reading

interval is changed to the new reading interval, i.e. using cable con-

nection is every 8 seconds data reading interval or from 32 seconds -

128 seconds intervals when using 433MHz (depending on wind

speed)

Using the AC adaptor to operate the base station will also supply

power to the sensor if the cable is connected to it. Batteries used for

433MHz transmission may be left in the sensor when using cable

connection for power back-up in case of AC power failure. A loss of

power would desynchronize the base station and the sensor and no

weather data will be received. To Synchronize the units so that the

weather data can be received, press and hold the PLUS(+) for 2 sec-

onds. However in general, batteries that will not be used for long

periods should be removed to avoid leakage.

Wireless 433MHz transmission:

Using 433MHz wireless transmission of weather data from the sensor

to the base station will provide users greater freedom as to where

units can be positioned without the need to be restricted by cable.

Note:

If no outdoor weather data is displayed or the signal to the sensors is

lost during setting up, mounting, changing of batteries to the sensor or

plugging or unplugging cables, simply press and hold the PLUS(+)

key for 2 seconds and a short beep will sound to synchronize the

base station to sensors. Without being synchronized, weather data

will not be received.

1. Low battery indicator

2. DCF77 radio controlled time icon

3. Date display

4. Time zone display

5. Date, seconds, alarm time and time

zone

6. Alarm icon

7. Weather forecast icons

8. Weather tendency indicator

9. Pressure alarm display

10. hPa/inHg air pressure unit

11. Pressure units (relative or absolute)

12. 433MHz reception icon

13. Rainfall display

14. Indoor, outdoor, humidity, dew point,

wind chill, rainfall alarm icon

15. 24h, 1h or total hour display

16. Humidity display as RH%

17. Rainfall units (inch or mm)

18. Temperature display units (ºC or ºF)

19. Outdoor temperature/humidity display

20. Indoor temperature/humidity display

21. Dew point temperature display

22. Wind chill temperature display

23. Wind alarm icon

24. Wind information for Min/Max speed

and wind speed low, high, direction

alarm

25. Wind direction and speed (m/s, knots,

Beaufort, km/h or mph) display

26. Alarm buzzer ON/OFF icon

27. General alarm icon

7. LCD Overview

The following illustration shows the full segments of the LCD for

description purposes only and will not appear like this during

normal operation and use.

8. Function test:

Once the weather station is powered up, perform a function test by

checking that the weather data is received. To do this, press the

either DISPLAY, PRESSURE or WIND keys to toggle through the

relevant LCD sections:

1) Indoor temperature and humidity

2) Outdoor temperature and humidity

3) Outdoor wind chill

4) Dew point

5) Rainfall 24 hour

6) Rainfall 1hour

7) Rainfall Total

8) Relative and absolute pressure

9) Wind speed, wind direction and wind direction in degrees

If any readings cannot be received from the sensors, lines (---) will

be displayed in the respective weather sections of the LCD. In this

case, check that all cables are correctly inserted into the correct

sockets and press and hold the PLUS(+) key for 2 seconds and a

short beep will sound to synchronize the base station to the sensors

otherwise no weather data will be received.

Some weather readings such as wind speed and direction may not

appear immediately on the LCD if the wind-fan or vane of the wind

sensor is moved. This is due to the set reading time intervals for the

wind readings. However the current wind speed or direction will be

displayed once the time reading interval is reached. For rainfall, the

interval readings may take up to 2 minutes before the data is dis-

played on the LCD.

9. Mounting

Important Note

Prior to drilling mounting holes and permanently affixing any of the

units, please ensure the following points are considered:

•Cable lengths of the units meet with your distance requirements

at the point of fixing

•Signals from the sensors can be received by the base station at

points of mounting

•Radio controlled time signal can be received at the point of

mounting

Base Station

With two foldable legs at the back of the unit, the base station can be

placed onto any flat surface or wall mounted at the desired location by

the hanging holes also at the back of the unit. It is important to check

that the 433MHz (if using wireless connection) and the DCF77 radio

controlled time signal can be received before permanently mounting

any of the units. Should the base station not display the 433MHz

weather data from the sensors or the radio controlled time from the

desired location, then relocate the units. Once the signals are re-

ceived, the system can be affixed. Also if you have selected to use

cable connection, ensure that distances can reach all desired loca-

tions before affixing any unit permanently

Mounting the Wind Sensor onto a mast

Firstly, check that the wind-fan and the wind-vane can rotate freely

before fixing the unit. For correct and accurate readings it is impor-

tant to mount the sensor so that the front (marked E) is pointing in

East-West direction. The wind sensor should now be mounted using

the screw provided onto a mast to allow the wind to travel around the

sensor unhindered from all directions (ideal mast size should be from

Ø16mm –Ø33mm).

Once the wind sensor is fixed onto the mast, connect the cable to the

corresponding thermo-hygro sensor socket so that operating power

supply can be received and data can be transmitted to the base sta-

tion.

Mounting the Rain Sensor

For best results, the rain sensor should be securely mounted onto a

horizontal surface about 1 meter above the ground and in an open

area away from trees or other coverings where rainfall may be re-

duced causing inaccurate readings.

When securing into place, check that rain excess will not collect and

store at the base of the unit but can flow out between the base and

the mounting surface (test by pouring clean water).

After mounting the rain sensor, connect the cable to the thermo-hygro

sensor at the corresponding socket so power supply can be received

and data be transmitted to the base station

The rain sensor is now operable. For testing purposes, very slowly

pour a small amount of clean water into the rain sensor funnel. The

water will act as rainfall and will be received and displayed at the

base station after about 2 minutes delay i.e. when the reading interval

is reached (to clear this testing data on the base station, refer to the

section “MIN/MAX Mode” below).

Base portion

Funnel portion

Wind-fan

Wind-vane

Mast

Mounting the thermo-hygro Sensor

An ideal mounting place for the thermo-hygro sensor would be the

outer wall beneath the extension of a roof, as this will protect the

sensor from direct sunlight and other extreme weather conditions.

To wall mount, use the 2 screws to affix the wall bracket to the de-

sired wall, plug in the thermo-hygro sensor to the bracket and secure

both parts by the use of the supplied screw and ensure that the ca-

bles from the wind and rain sensors are correctly plugged in other-

wise data transmission errors could occur.

10. Resetting & factory settings:

As previously mentioned, in the event of a power reset to the sensor

(for example a change of batteries), the base station has to synchro-

nize to the sensor again otherwise no weather data will be received.

To do this, simply press and hold the PLUS(+) key for 2 seconds and

a short beep will sound to synchronize the base station to the sensor.

When the units are synchronized, the data will be received again and

the base station will return to normal operation mode.

Do not reset the power of the base station otherwise all 175 sets of

recorded weather history data for transferring to the PC will be lost

(for full details of PC use, please see PC user manual in the enclosed

Heavy Weather CD-ROM).

However if you wish to make a full reset of the base station and return

to the original factory settings, simultaneously press and hold the

PRESSURE and WIND keys for about 5 seconds. The base station

will beep once and the entire LCD will light up for 5 seconds and go

back to the original factory settings. This process with clear all previ-

ous user defined values and all weather history recordings.

Factory default settings:

The following table shows the factory default values of the weather

station:

Matter:

Default Setting:

Time

0:00

Date

01.01.2001

Time zone

Alarm time

0:00

Relative air pressure

1013.0 hPa

Weather-picture threshold

3 hPa

LCD contrast level

5 (1-8 levels)

Rainfall per impulse

0.518mm

Storm alarm

5 hPa

Relative air pressure

alarm

960.0 hPa

(low)

1040.0 hPa

(high)

Indoor temperature alarm

10.0ºC (low)

30.0ºC (high)

Outdoor temperature

alarm

0.0ºC (low)

40.0ºC (high)

Indoor humidity alarm

35%RH (low)

65%RH (high)

Outdoor humidity alarm

45%RH (low)

70%RH (high)

Wind chill alarm

10.0ºC (low)

30.0ºC (high)

Dew point alarm

0.0ºC (low)

30.0ºC (high)

Rainfall 24h alarm

50.0mm

Rainfall 1h alarm

1.0mm

Wind Speed

1km/h (low)

100km/h (high)

Wind direction alarm

None set

Note:

All alarm default values are deactivated at the start up and any alarm

must be activated by the user otherwise it will not sound.

Rain Cover

Wall Bracket

Main Unit

Sunny

Rainy

Cloudy

11. Function Description of the Weather Station

After setting up, the following data will be displayed in different sec-

tions on the LCD. If this is not the case please observe the notes on

“Interferences” below.

Time & Date (LCD Section 1)

If the DCF77 icon (icon 2) is ON and not flashing, it means that the

DCF77 radio-controlled time and date are has been received. Press

the PLUS(+) key to change the format of date display between

date/month/year, weekday/date/month, seconds, alarm set time and

time zone.

Weather forecasting (LCD Section 1)

The three weather icons Sunny, Cloudy and Rainy represent the

weather forecasting. There are also two weather tendency indicators

to show the air pressure tendency either side of the weather icons.

Notes to hPa sensitivity setting for weather forecasting:

The hPa (Hekto-Pascal) pressure sensitivity can be set to suit the

user’s requirement for weather forecasting from 2 hPa to 4 hPa (see

Basic Programming below). For areas that experience frequent

changes in air pressure (which does not necessarily reflect a change

in the weather) requires a higher hPa setting compared to an area

where the air pressure is stagnant. For example if 3 hPa is selected,

then there must be a fall or rise in air pressure of at least 3 hPa be-

fore the weather station will register this as a change in weather.

Air Pressure (LCD Section 1)

The air pressure reading is displayed here. Press the PRESSURE

key to toggle between relative and absolute air pressure displays.

Notes to Absolute and Relative Air Pressure:

Absolute air pressure provides the display of the true measured air

pressure of the current time and location. This is not programmable

and the absolute air pressure range of the weather station is from 300

hPa to 1099 hPa (standard air pressure at an altitude of 9,100 meters

is around 300 hPa).

Relative air pressure is the one value that is calculated back to sea

level from the local absolute air pressure and can thus be taken as a

reference for weather condition and weather development for the

entire country. It can be programmed to represent your local sur-

roundings. Since the relative air pressure is also the one value given

by various newspapers, TV and radio broadcasting stations in their

daily weather forecasts for their respective locations, users can set

the relative air pressure of the weather station to this value to repre-

sent readings your their area (see Basic Programming Modes be-

low).

LCD Section 1:

Time, date, seconds, time zone,

weather forecasting icons with

tendency arrows, air pressure,

and respective alarms sections

LCD Section 2:

Indoor and outdoor temperature and

relative humidity, wind chill, dew

point, rainfall, and respective alarms

sections

LCD Section 3:

Wind direction, wind speed, and re-

spective alarms sections

Weather Data (LCD Section 2)

Indoor temperature and humidity are displayed simultaneously in this

section. Use the DISPLAY key to toggle through the displays for other

weather information:

-Outdoor temperature/humidity

-Outdoor wind chill

-Outdoor dew point

-Rainfall 24h

-Rainfall 1h

-Rainfall total.

Notes to Dewpoint and Windchill:

Air can at a certain temperature only carry a certain amount of water

(water vapor), which also increases and decreases with temperature.

If the air temperature decreases below the so called dewpoint (satura-

tion point), the excessive water vapor will condense and fall out in

form of dew, fog or rain. At a temperature of e.g. 15° C and a relative

humidity of 50% the dewpoint will be about 5° C, at 80% humidity

about 12°C. At a relative humidity of 100% saturation is reached, i.e.

the dewpoint is 15°C. At a dewpoint below freezing the fallout will

become frost or snow.

Windchill has been introduced for battle planning during World War II.

It represents not the real measured but the one temperature a person

feels in open area under the influence of wind and cold. Windchill is

laid out in tables for various temperatures and wind speeds. At an

outdoor temperature of e.g. 8° C and calm winds a person moving at a

speed of 6 m/s will already feel a windchill temperature of 0°C.

Wind Data (LCD Section 3)

The current wind direction will be displayed on the LCD compass on

the wind section. Press the WIND key to toggle between wind direc-

tion as numerical (e.g. 225°) and abbreviated characters (e.g. SW) as

well as numerical wind speed display inside the compass circle.

12. Operation keys

The base station has 8 keys for easy operation. Please refer to the

following table for use and function of each key: Further descriptions

of the key functions with regard to their immediate range of applica-

tion can be found in the Programming modes:

SET -key

-In normal mode to enter the manual basic

programming mode

-In basic programming mode to select the

following setting modes:

-LCD contrast setting

-Manual time setting (hours/minutes)

-12/24 time format display

-Calendar setting (year/month/date)

-Time zone setting

-°C/° F temperature setting

-Wind speed unit setting

-Rainfall unit setting

-Pressure unit setting

-Relative air pressure setting

-Weather picture threshold setting

-Storm warning setting

-Acoustic storm alarm setting

-In setting modes confirmation of the se-

lected values

-In alarm modes alarm ON/OFF

-In alarm mode to enter programming of

alarm values (long pressing)

-To exit MIN/MAX modes

PRESSURE -key

-Toggle between Absolute and Relative air

pressure displays

DISPLAY -key

-Toggle between the following current/

maximum/ minimum display modes:

-Indoor temperature and humidity

-Outdoor temperature and humidity

-Outdoor wind chill

-Outdoor dew point

-Rainfall (24h, 1h, total)

WIND -key

To toggle between the following settings:

-Wind speed

-Wind direction

-Wind direction display in degrees

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS6304 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86234 Abmessungen

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9055TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TXV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7391UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology 79400 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WEATHER DIRECT WD-3105 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TX Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6812 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9066U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9124U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415FCTv2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6890 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 328-1415 Installationsanleitung

La Crosse Technology

La Crosse Technology 302-604B Abmessungen

La Crosse Technology

La Crosse Technology WS-3610U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8025SU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-913 3U-IT-CA Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung