La Crosse Technology T83646v2 Bedienungsanleitung

Model: T83646v2 www.lacrossetechnology.com/support Page | 1

Model:T83646v2

Quick Setup Guide

DC: 012015

WIRELESS WEATHER STATION

BUTTONS

Battery

Compartment

2 “AA”

REMOTESENSOR

TX141TH-ACH

BACK

VIEW

Battery

Compartment

2“AA”

Calendar +

Time Alarm

Remote

Temp/Humidity

with Trend, Heat

Index, Dew

Point, Mold

Risk,

Temperature

Alerts + up to 3

remote sensors.

Time and

Moon Phase

FRONTVIEW

Indoor

Temp/Humidity

with Trend,

Mold Risk, +

Temperature

Alerts.

LED

Battery

Compartment

2 “AA”

Model: T83646v2 www.lacrossetechnology.com/support Page | 2

Get Started

Step 1: Insert 2 new Alkaline AA batteries (not included) into the

TX141TH-ACH

remote sensor. Observe the correct polarity. The red LED will

flash during transmission.

Step 2: Insert 2 new AA Alkaline batteries (not included) into the weather

station. Observe the correct polarity.

Restart: If there is no remote temperature data after 3 minutes, remove batteries

from the weather station and the remote sensor, then press any button 20 times.

After 15 minutes, return to Step 1 above.

Set Time, Date, Temperature Unit

1. Hold the SETTINGS button to enter time set mode.

2. Press the -or +buttons to adjust the values.

3. Press the SETTINGS button to confirm adjustments and move to the

next item.

Time setting order:

1. Beep ON/OFF

2. 12/24 hour time format

3. Hour

4. Minutes

5. Year

6. Month

7. Date

Note: Weekday will set automatically with year, month& date.

8. Fahrenheit/Celsius

9. Month/Day or Day/Month format (M-D)

Press the SETTINGS button to exit, or wait 10 seconds without pressing

buttons to return to the normal time display.

Set Indoor and Remote Temperature/Humidity Alerts

Setting the alerts value and arming the alerts

are two separate steps.

1. Hold the ALERTS button for 3 seconds to

enter alert set mode. The temperature alert value will blink in set

mode.

2. Press the -or +buttons to adjust the values.

3. Press the ALERTS button to confirm

The alert setting order:

INDOOR HUMIDITY HIINDOOR HUMIDITY LOINDOOR TEMP

HIINDOOR TEMP LO OUTDOOR HUMIDITY HIOUTDOOR

HUMIDITY LOOUTDOOR TEMP HIOUTDOOR TEMP LO

Model: T83646v2 www.lacrossetechnology.com/support Page | 3

Press the ALERTS button to exit, or wait 10 seconds without pressing

buttons to return to normal time display.

Arm/Disarm Temperature/Humidity Alerts

Press the ALERTS button to enter Alert display mode. Press and

release the ALERTS button to toggle between the alerts: INDOOR

HUMIDITY



OUTDOOR HUMIDITYINDOOR TEMP



OUTDOOR TEMP

Press the -or +buttons to arm or disarm the alert.

ALERT ICON appears when armed.

Active Temperature/Humidity Alert

When temperature/humidity alert is ringing, corresponding alert icon

will flash.

The alert will beep once per minute, until the temperature/humidity is

out of alert range.

Press any button to stop alert sound. The alert icon, HI/LO, will still

flash on corresponding channel.

Disarm Alert: In normal mode, press the ALERTS button to select

the alert to disarm. With a HI or LO alert selected, press the -or +

buttons to turn OFF the alert.

Moon Phase

Moon phase based on lunar

calendar, and the time and date set

on the weather station.

Set Time Alarm

1. Hold the ALARM button to enter alarm time set

mode.

2. Press the -or +buttons to adjust the values.

3. Press the ALARM button to confirm &move to the next item.

Alarm Time setting order: 1. Hours, 2. Minutes

Activate/Deactivate Time Alarm

Press the ALARM button once to view alarm time.

Press the ALARM button again to activate the alarm.

Once activated, the bell icon appears.

Press the ALARM button again to deactivate the alarm. The bell icon

will disappear.

Model: T83646v2 www.lacrossetechnology.com/support Page | 4

Snooze (Silences Alarm Temporarily)

When alarm sounds, press the ALARM button to silence the

alarm for 10 minutes.

The alarm bell iconwill flash.

In snooze mode, press any button except ALARM to stop alarm for

one day.

Note: The alarm is crescendo sound. The alarm sounds for two

minutes and then will shut off completely.

Heat Index/Dew Point/Mold Risk

Press the INFO button repeatedly to toggle between:

Heat Index.

Dew Point.

Mold Risk.

Heat Index, Dew Point and Mold Risk indicators are available for up to

three remote locations (when using multiple remote sensors).

When using multiple sensors press the +button to view readings

on a different channel.

Search for Remote Sensor

Hold the INFO button to search for the remote sensor.

The strength signal icon will animate until the sensor signal

is received or for 3 minutes if no signal available.

Remote Sensor Channels-Auto Scroll

Press the +button to view remote sensor channels for 30 seconds

when multiple sensors are used.

The weather station will automatically rotate

through the channels for all connected sensors

when the circling arrows show below the

channel number.

Press and release the +button to lock the weather station into one

channel. Then view channels individually with a press of the +button.

Note: When multiple remote sensors are used, Heat Index, Dew

Point and Mold Risk will be available for each remote sensor

Model: T83646v2 www.lacrossetechnology.com/support Page | 5

Setup with Multiple Remote Sensors.

The weather station will accommodate up to three remote sensors

(TX141TH-ACH).

Press the +button to easily see the temperature in various locations:

outdoors, baby’s room, greenhouse, basement, etc. Monitor remote

temperature in up to 3 locations within a 300 ft. wireless range of the

weather station.

To connect multiple remote sensors to the weather station:

1. Remove the battery cover from all the sensors

(Leave battery covers off until all sensors are

received by the weather station).

2. Set the first remote sensor to Channel 1 and insert 2AA batteries.

3. Set the second remote sensor to Channel 2 and insert 2AA batteries.

4. Set the third remote sensor to Channel 3 and insert 2AA batteries.

5. Hold the INFO button on the weather station for 5 seconds.

The weather station will search for all remote sensors.

6. Press the TX button on each remote sensor to transmit RF

signal.

7. When RF connection is established, the temperature & humidity for

each of the selected channels will appear on the main unit.

8. Allow the sensors and the weather station to stay 5-10 feet apart for

15 minutes to establish a solid connection.

9. Install the battery covers on each sensor.

10. After 15 minutes place the remote sensors in appropriate locations.

Press and release the +button to view channel 1, 2 or 3 on the weather

station when multiple sensors are used.

Note: If only one sensor is connected, the other channels will show

dashes for temperature and humidity.

Temperature/Humidity Trend Indicators

Temperature (2°F/1°C) and Humidity (5% RH) trend indicators update

about every 30 minutes.

Temperature has risen in the past 3 hours.

Humidity has risen in the past 3 hours.

Temperature has not changed in the past 3 hours.

Humidity has not changed in the past 3 hours.

Temperature has fallen in the past 3 hours.

Humidity has fallen in the past 3 hours.

Model: T83646v2 www.lacrossetechnology.com/support Page | 6

View/Reset MIN/MAX Values

The station automatically resets minimum and maximum

values daily at midnight (12:00 AM).

Press and release the -button to view minimum and

maximum values.

Hold the -button to manually reset minimum and maximum values.

Low Battery Icon

Low battery icon indicates low battery for station or sensor.

If the icon is displayed in the Remote Temperature section,

Replace batteries in the remote sensor.

If the icon is displayed in the Indoor Temperature section,

Replace batteries in the weather station.

Remote Sensor Positioning

Outdoor use: Mount the Remote Sensor on a north-facing wall or in any well

shaded area. Under an eave or deck rail is preferred.

Indoor use: Mount the Remote Sensor indoors to monitor high mold risk areas

like in a crawl space or a basement.

The maximum wireless transmission range to the weather station is over 300

feet (91 meters) in open air, not including walls or floors.

Be sure the remote sensor is mounted vertically.

Weather Station Care & Maintenance

Do not mix old and new batteries

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

Always purchase the correct size and grade of battery most suitable for

intended use.

Replace all batteries of a set at the same time.

Clean the battery contacts and also those of the device prior to battery

installation.

Ensure the batteries are installed with correct polarity (+and -).

Remove batteries from equipment, which is not to be used for an extended

period.

Remove expired batteries promptly.

Do not expose to extreme temperature, vibration or shock.

Clean with a soft damp cloth. Do not use solvents or scouring agents.

The product is not a toy. Keep it out of reach of children.

The product is not to be used for medical purpose or for public information. It

is intended for home use only.

The specs of this product may change without prior notice.

Improper use or unauthorized opening of housing voids warranty.

If the product is not working properly, change the batteries.

Low

Battery

Icon

Model: T83646v2 www.lacrossetechnology.com/support Page | 7

Specifications

Indoor

Temperature Range: +32°F to +122°F (0°C to 50°C)

Humidity Range: 1%-99% (RH)

Remote

Temperature Range: -40°F to 140°F (-40°C to 60°C)

Humidity Range: 1%-99% (RH)

Distance: Over 300 ft. (91 meters)

RF 433MHz (open air)

Power

Weather Station 2-AA, IEC, LR6 batteries (not included)

TX141TH-ACH Remote Sensor: 2-AA, IEC, LR6 batteries (not included)

Battery Life

Weather Station

Battery Backup:

Battery life is over 12 months when using

reputable battery brands

TX141TH-ACH Remote Sensor: Battery life is over 24 months when using

reputable battery brands

Dimensions

Weather Station: 5.40” L x 1.68” W x 4.40” H

(137.2 mm L x 42.8 mm W x 111.8 mm H)

TX141TH-ACH Remote Sensor: 1.57"L x 0.79"W x 5.12"H (40 x 20 x 130mm)

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of

purchase) on this product relating to manufacturing defects in materials &

workmanship.

Before returning a product, please contact our friendly customer support

with questions or visit our online help (manuals and FAQS):

Phone: 1-608-782-1610

Online Product Support: www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Warranty Address: Protected under U.S. Patents:

La Crosse Technology, Ltd 5,978,738 | 6,076,044 |RE43903

2830 S. 26th St.

La Crosse, WI 54601

Model: T83646v2 www.lacrossetechnology.com/support Page | 8

FCC Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modifications to this equipment.Such

modifications could void the user authority to operate the equipment.

part, or duplicated or processed using electronic, mechanical or chemical

process without the written permission of the publisher. This booklet may

contain errors or misprints. The information it contains is regularly checked

and corrections are included in subsequent editions. We disclaim any

responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

changes or changes or

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference

that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada

applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Model:T83646v2 www. Lacrossetechnology.com/support Page9

Andere Handbücher für T83646v2

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-9210U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3512 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX2000 Discovery Bedienungsanleitung

La Crosse Technology

La Crosse Technology V22-WRTHV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9520U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-2314 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today TX25U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology 308-1425BCA Abmessungen

La Crosse Technology

La Crosse Technology WA-1030U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6818 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9760U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7044U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9250U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-2408FR Abmessungen

La Crosse Technology

La Crosse Technology 724-2310 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9018U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V10-TH Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung