La Crosse Technology Wireless Weather Station Bedienungsanleitung

Stands

LCD Display

Function keys

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality piece of

engineering. Providing radio controlled time, date, calendar, Moon phase, indoor and outdoor temperature, indoor and outdoor

relative humidity, and air pressure history information. This unit will never keep you guessing on current and future weather

conditions. Operation of this product is simple and straightforward. By reading this operating manual, the user will receive a better

understanding of the Weather Station together with the optimum benefit of all its features.

FEATURES:

The Weather Station

•

DCF Radio controlled time with manual setting option

•

Time reception ON/OFF (user selectable)

•

12/24 hour time display

•

Time zone option ±12 hours

•

Weekday and day calendar display (year and month only in setting mode)

•

Alarm setting with snooze function

Battery compartment

Hanging hole

« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology,

exclusively designed and developed by LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the transmitters: follow your

climatic variations in real-time!

•

Display 12 Moon phases throughout the year

•

Weather forecasting with weather tendency indicator

•

Indoor comfort indicator

•

Temperature display in ºC/ºF

•

Indoor and outdoor temperature display with MIN/MAX records and time of reception

•

Humidity data display as RH%

•

Indoor and outdoor humidity display with MIN/MAX records

•

Relative air pressure hPa/ inHg with adjustable reference value

•

Weather icon sensitivity setting

•

Relative air pressure history for the past 24 hours (electronic barometer with barometric pressure trend)

•

Wireless transmission at 868 MHz

•

Signal reception intervals at 4 seconds

•

LCD contrast selectable

•

Can receive up to 3 outdoor transmitters

•

Low battery indicator

•

Table standing or wall mounting

The Outdoor Thermo-hygro Transmitter

•

Remote transmission of outdoor temperature and humidity to Weather Station by 868 MHz

•

Display alternately the outdoor temperature and humidity readings on LCD

•

Shower proof casing

•

Wall mounting case (Mounting at a sheltered place. Avoid direct rain and sunshine)

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x C, IEC LR14, 1.5V batteries. To install and replace

the batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the

battery compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO TRANSMITTER

The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V battery. To install and replace the batteries, please

follow the steps below:

1. Remove the battery compartment cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is

because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the

Weather station in the first 3 minutes of power being supplied to it

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to an authorized depot.

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro outdoor

transmitter”above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install and replace

batteries in the Weather Station”above). Once the batteries are in place, all segments of the LCD will light up briefly and a

short signal tone will sound. Following the indoor temperature/humidity and the time as 0:00 will be displayed. If these

information are not displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before

reinserting them. Once the indoor data is displayed user may proceed to the next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The outdoor

temperature and humidity data should then be displayed on the Weather station. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the transmitter

should not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”).

Note: In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts. Always wait at least 1

minute after removing the batteries before reinserting, otherwise start up and transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the batteries are in

place, all segments of the LCD will light up briefly and a short signal tine will sound. Following the indoor temperature/humidity

and the time as 0:00 will be displayed. If these information are not displayed on the LCD after 60 seconds, remove the

batteries from both units and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then be displayed on the Weather

Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from the first

transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station displays the

information of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon should then be displayed on the

Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from all the units and reset from

step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather

Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will

shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from

step 1.

Note : User shall insert the batteries into the third transmitter within 45 seconds after the Weather Station displays the

information of the first transmitter.

8. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the transmitter

should not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission

problems occur, it is necessary to remove the batteries from all units and start again the set-up from

step 1.

RESETTING

The Weather Station and the Thermo-hygro transmitter need to be reset when one of the following conditions occur:

•

Unsuccessful 868MHz signal reception.

•

Malfunction on the units.

•

Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute before powering up the Weather station again. Proceed

from step 1 in “Setting Up”.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch Technische Bundesanstalt

Braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from

Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your

radio-controlled Weather Station receives this signal and converts it to show the precise time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases, there should be no reception problems

within a 1500km radius of Frankfurt.

Once the outdoor data reception learning period is completed, the DCF tower icon in the clock display will start flashing in the upper

left corner. This indicates that the clock has detected that there is a radio signal present and is trying to receive it. When the time

code is received, the DCF tower becomes permanently lit and the time will be displayed.

DCF reception is done twice daily at 02:00 and 03:00 am. If the reception is not successful at 03:00 am, then the next reception

takes place the next hour and so on until 06:00am, or until the reception is successful. If the reception is not successful at 06:00 am,

then the next attempt will take place the next day at 02:00 am.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then please take note of the following:

•

Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 1.5 - 2 meters.

•

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases,

please place the unit close to a window and/ or point its front or back towards the Frankfurt transmitter.

•

During nighttime, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily

reception is adequate to keep the accuracy deviation below 1 second.

FUNCTION KEYS:

Weather Station:

The Weather Station has 5 easy to use function keys:

SET key

•

Press and hold the key to enter manual setting modes: LCD contrast, time zone, time reception ON/OFF, 12/24 hour display,

manual time setting, calendar, temperature °C/°F, p ressure hPa/inHg, relative pressure value, and weather icon sensitivity

setting

•

Reset all MIN/MAX records

•

Stop the alarm during alarm ringing

•

Stop snooze mode

IN key

•

Press to toggle between MAX/MIN and current indoor temperature/humidity data

•

Press to set the alarm hour (inside alarm setting mode)

•

Decrease relative pressure value (within manual set mode)

•

Stop the alarm during alarm ringing

•

Stop snooze mode

ALM/DATE key

•

Press and hold key for 3 seconds to enter the alarm setting mode

•

Active/de-active the alarm time

•

Stop the alarm during alarm ringing

•

Stop snooze mode

•

Display date

OUT/+ key

•

Press shortly to toggle between MAX/MIN and current outdoor temperature/humidity data

•

Increase, change, toggle all values in manual set mode

•

Press to set the alarm minute (inside alarm setting mode)

•

Stop the alarm during alarm ringing

•

Stop snooze mode

SNOOZE/CH key

•

Active snooze function during alarm ringing

•

Exit the manual set mode and alarm setting mode

•

Switch among display of channels (if more than 1 transmitter is used)

LCD SCREEN

The LCD screen is split into 4 sections displaying the information for time/calendar/moon phase, indoor data, weather forecast and

outdoor data.

IN key OUT/+ key

ALM/DATE key

SET key

SNOOZE/CH key

Moon phase icon

Weather tendency

indicator

Calendar

Indoor relative humidity in RH%

Time reception icon

(for DCF time)

Indoor temperature in ºC/ ºF

Weather forecast icon

Outdoor data signal reception indicator*

Outdoor temperature

in ºC/ ºF

Outdoor relative humidity in RH%

Comfort indicator icon

Relative air pressure

history bar graph

Relative air pressure in hPa / inHg

Transmitter identification number (if more than 1 transmitter is used)

* When the signal is successfully received by the Weather Station, the outdoor transmission icon will be switched on. (If not

successful, the icon will not be shown on LCD). The user can then easily see whether the last reception was successful (icon on) or

not (icon off). On the other hand, the short blinking of the icon shows that a reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET key for:

•

LCD contrast setting

•

Time zone setting

•

Time reception ON/OFF setting

•

12/24-hour format setting

•

Manual time setting

•

Calendar setting

•

°C/°F temperature setting

•

hPa / inHg pressure setting

•

Relative air pressure setting

•

Weather forecasting icon sensitivity setting

LCD CONTRAST SETTING:

Last digit flashing

Low battery indicator

Time

Hour flashing

Minutes flashing

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):

1. Press and hold the SET key until the digit starts flashing.

2. Use the OUT/+ key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone setting.

TIME ZONE SETTING:

The time zone default of the Weather Station is “0”. To set a different time zone:

1. The current time zone value starts flashing.

2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and then runs from +12 back to 0 in consecutive 1-hour

intervals.

3. Confirm with the SET key and enter the Time reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

In area where reception of the DCF time is not possible, the DCF time reception function can be turn OFF. The clock will then work

as a normal Quartz clock. (Default setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the OUT/+ key to turn OFF the time reception function.

3. Confirm with the SET key and enter the 12/24-hour format setting.

Note:

If the Time Reception function is turn OFF manually, the clock will not attempt any reception of the DCF time as long as the

Time Reception OFF function is activated.

The time reception icon and the “DCF” icon will not be displayed on the LCD.

12/24-HOUR FORMAT SETTING:

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-Hour)

1. Use the OUT/+ key to toggle between “12H” or “24H”.

2. Confirm with the SET key and enter the Manual time setting.

MANUAL TIME SETTING:

In case the Weather Station cannot detect the DCF-signal (for example due to disturbances, transmitting distance, etc.), the time

can be manually set. The clock will then work as a normal Quartz clock.

Flashing

1. The hour digit will start flashing.

2. Use the OUT/+ key to set the hour.

3. Press again the SET key to set the minutes. The minute digits start flashing.

4. Use the OUT/+ key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try and receive the signal at 02:00 and 03:00 am despite it being manually set. When it does receive the signal, it

will change the manually set time into the received time. During reception attempts the DCF tower icon will flash. If reception has

been unsuccessful, then the DCF tower icon will not appear but reception will still be attempted the following day.

CALENDAR SETTING:

The date default of the Weather station is 1. 1. 2006. Once the radio-controlled time signals are received, the date is automatically

updated. However, if the signals are not received, the date can also be set manually.

1. The year starts flashing.

2. Use the OUT/+ key to set the year (between year 2003-2029).

3. Press the SET key again to confirm and to enter the month setting. The month starts flashing.

4. Use the OUT/+ key to set the month.

5. Press the SET key again to confirm and to enter the date setting mode. The date starts flashing.

6. Use the OUT/+ key to set the date.

Confirm all calendar settings with the SET key and enter the Temperature unit setting.

°C/°F TEMPERATURE SETTING:

The temperature display can be selected to show temperature data in °C or °F (Default °C).

1. Use the OUT/+ key to toggle between “°C” or “°F”.

Confirm with the SET key and enter the Air pressure unit setting.

hPa / inHg PRESSURE UNIT SETTING:

The pressure display can be selected to show relative air pressure in hPa or inHg (default is “hPa”).

Year

Date and month (24hr time format)

Month and date (12hr time format)

Flashing

1. Use the OUT/+ key to toggle between “hPa” or “inHg” unit

2. Confirm with the SET key and enter the Relative air pressure value setting.

Note: Units of weather icon sensitivity and air pressure history are not affected. They are always expressed in hPa.

RELATIVE AIR PRESSURE VALUE SETTING

The default relative pressure value is 1013 hPa (29.92 inHg). This can be manually set to another value within the range of 960 –

1040 hPa (28.35 – 30.72 inHg) for a better reference.

1. The current relative pressure value will start flashing

2. Use the OUT/+ key to increment and IN key to decrement the value. Keep holding the key allows the value to advance faster.

3. Confirm with the SET key and enter the Weather forecast icon sensitivity setting.

WEATHER FORECASTING ICON SENSITIVITY SETTING:

For locations with rapid changes of weather conditions, the weather icons sensitivity can be set to a different level for faster display

of weather conditions.

1. The current sensitivity value will start flashing.

2. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of setting: 2, 3 and 4. The value corresponds to the

change of air pressure in hPa before the weather icon will switch to another state. Level 2 is the most sensitive setting, level 4

is the slowest recording setting (default setting is "3").

3. Confirm with the SET key and exit the Manual settings.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting mode anytime during the manual setting, press the SNOOZE/CH key or wait for automatic timeout. The

mode will return to normal time display.

ALARM SETTING:

The alarm time can be set when pressing the ALM/DATE key.

1. Press and hold the ALM/DATE key to enter the alarm set mode. The alarm digits flash.

2. Use the IN key to set the alarm hour.

Flashing

Alarm icons

Alarm time

3. Use the OUT/+ key to set the alarm minute.

4. Confirm with SNOOZE/CH key and exit the Alarm setting. The icon ((●)) will be displayed along with the set alarm time.

Note:

If the calendar is displayed in the Weather station, the alarm is NOT active.

To view and active the alarm, press the ALM/DATE key. The alarm icon and the alarm time will be displayed, indicating that the

alarm setting is activated.

The maximum alarm ring duration is 2 minutes.

SNOOZE SETTING AND STOPPING THE ALARM:

10 minutes snooze function can be set when the alarm is ringing by pressing the SNOOZE/CH key.

When the alarm is snoozing, the alarm icon ((•)) will remain flashing indicating that the alarm is active but is in Snooze mode. To

stop the snooze function when it is in snooze period, press any key except the SNOOZE/CH key.

To stop the alarm, press any key during alarm ringing, except the SNOOZE/CH key.

MOON PHASES SYMBOL

The Moon icon of the Weather station will also display all 12 Moon phases throughout the year according to the set calendar.

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:

The indoor temperature and humidity data, the indoor comfort indicator are automatically updated and displayed on the second

section of the LCD.

THE COMFORT LEVEL INDICATOR:

Comfortable : A happy face icon “☺” indicating a temperature level between 20°C and 25.9°C and relative humidity reading

between 45% and 65%.

Uncomfortable : A sad face icon “” indicating any value outside the comfortable range.

TOGGLING AND RESETTING THE INDOOR READINGS:

1. Press the IN key to toggle between the indoor current, MAX/MIN temperature and humidity data. The time and dates of the

recorded data will also be displayed in the time and calendar sections (for temperature data only).

Once to show the MAX indoor temperature and humidity data with the recorded time and date.

Indoor relative

humidity in RH%

Indoor temperature

in °C or ºF

MAX icon

New Moon

Small Waxing

Crescent

Large Waxing

Crescent First Quarter

Small Waxing

Gibbous

Large

Waxing

Gibbous

Small Waning

Crescent

Large Wani

Crescent Last Quarter

Small Waning

Gibbous

Large

Waning

Gibbous Full Moon

Andere Handbücher für Wireless Weather Station

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 308-805 Installationsanleitung

La Crosse Technology

La Crosse Technology 724-1409 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-1613-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX141TH-B Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX25U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology V10-TH Abmessungen

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8120U-IT Installationsanleitung

La Crosse Technology

La Crosse Technology 327-1417V2 Abmessungen

La Crosse Technology

La Crosse Technology WS-9121U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Abmessungen

La Crosse Technology

La Crosse Technology WS-9625U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9014TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WEATHER DIRECT WD-3105 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Handbuch

La Crosse Technology

La Crosse Technology WS-2010 Leitfaden

La Crosse Technology

La Crosse Technology WS-9125U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8035 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9632U-IT Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung