La Crosse Technology WS9090 Bedienungsanleitung

WIRELESS 868 MHz TEMPERATURE STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this 868MHz Temperature Station which displays the

time and outdoor temperature reading. With only two easy to use keys, this

innovative product is ideal for use in the home or office.

Instant Transmission+» is the up and coming state

the

art new

wireless transmission technology, exclusively designed and developed by

LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured

from the transmitters: follow your climatic variations in real-time!

SET key

Hanging

hole

LCD

display

MIN/MAX/+ key

THE TEMPERATURE STATION

FEATURES:

The Temperature Station

•DCF-77 Radio Controlled time with manual settings

•Time display (hour, minutes, seconds)

•Time reception ON/OFF

•12/24 hour time format

•Calendar display (month, date, weekday)

•Time zone option ±12 hours

•Temperature display in Celsius (°C) or Fahrenheit (°F) selectable

•Indoor and outdoor temperature display with MIN/MAX records

•All MIN/MAX recordings can be reset

•Wireless transmission at 868 MHz

•Signal reception intervals at 4-second

Stand

Battery

compartment

•Low battery indicator

•Table standing or wall mountable

THE OUTDOOR TEMPERATURE TRANSMITTER

•Remote transmission of outdoor temperature to

temperature station by 868MHz

•Weather-resistant casing

•Wall mounting case

•Mount in a sheltered place. Avoid direct rain and

sunshine

SETTING UP:

Note: This temperature station receives only one outdoor transmitter.

1. First, insert the batteries into the Temperature transmitter. (see “Install and

replace batteries in the Temperature transmitter“).

2. Immediately after and within 30 seconds, insert the batteries into Temperature

station (see “Install and replace batteries in the Temperature station”).

Once the batteries are in place, all segments of the LCD will light up briefly.

Following the time as 0:00 will be displayed and indoor temperature. If these

are not displayed after 60 seconds, remove the batteries and wait for at least

10 seconds before reinserting them.

3. After inserting the batteries, the Temperature station will start receiving data

from the transmitter. The outdoor temperature and the signal reception icon

should then

be displayed on the Temperature station. If this does not happen

after 3 minutes, the batteries will need to be removed from both units and

reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under

good conditions be a distance no more than 100 meters between the final

position of the Temperature station and the transmitter (see notes on

“Mounting” and “868 MHz Reception”).

5. Once the remote temperature has been received and displayed on the

Temperature station, the DCF time (radio controlled time) code reception is

automatically started. This takes typically between 3-5 minutes in good

conditions. If after 10 minutes, the DCF time has not been received, press the

SET key to manually enter a time initially.

Note:

Daily DCF reception is done at two hours interval until a reception is successful for

the day. If the reception is still not successful, then the next try takes place at 00:00

the next day.

If reception is successful, the received time will override the manually set time. The

date is also updated with the received time. (Please refer also to notes on “DCF-77

Radio Controlled Time” and “Manual Time Setting”)

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

STATION

The Temperature station uses 2 x AAA, IEC

LR3, 1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover at the back of the

temperature station.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER

The Temperature Transmitter uses 2 x AA, IEC LR6, 1.5V battery.

To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the

transmitter.

2. Insert the batteries, observing the correct polarity (see

marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is because a security code is assigned by

the transmitter at start-up and this code must be received and stored by the

Temperature station in the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum

accuracy of these units (Battery life see Specifications below).

Please participate in the preservation of the environment. Return

used batteries to an authorized depot.

MIN/MAX/+ key

SET key

FUNCTION KEYS:

Temperature Station:

There are two easy-to-use function keys in the Temperature Station

SET key

•Press and hold for about 3 seconds to enter the Manual setting modes:

manual time, year, date, month, weekday, 12/24 hour time format, time zone,

time reception ON/OFF, and temperature settings.

•Press and hold to reset the indoor and outdoor MIN/MAX temperature records

MIN/MAX/+ key

•

To make adjustments for various settings in manual setting modes

•

To toggle between the MIN/MAX readings of indoor/ outdoor temperature

Calendar

Low battery

icon (station)

Time

Outdoor

transmission

signal*

Indoor

temperature

Outdoor

temperature

DCF Tower Icon

(for time

reception)

Low battery icon

(transmitter)

LCD SCREEN AND SETTINGS

* When the outdoor signal is successfully received by the Weather Station, this icon

will be switched on. (If not successful, the icon will not be shown in LCD) So user

can easily see whether the last reception was successful (icon on) or not (icon off).

For better distinctness the LCD screen is split into 2 sections:

Section 1 - TIME AND CALENDAR

•Display the current time and calendar.

•A signal reception symbol is shown indicating that Atomic time (DCF time)

signal is received.

Section 2 - INDOOR AND OUTDOOR TEMPERATURE

•Display the current indoor temperature in normal display.

•Low battery indicator (temperature station)

•Display the outdoor temperature.

•Display the signal reception symbol indicating that receiver is receiving

outdoor data.

•Low battery indicator

DCF-77 RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by

the Physikalisch Technische Bundesanstalt Braunschweig which has a time

deviation of less than one second in one million years. The time is coded and

transmitted from Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz)

and has a transmitting range of approximately 1,500 km. Your radio-controlled

Temperature Station receives this signal and converts it to show the precise time in

summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal

cases, there should be no reception problems within a 1500km radius of Frankfurt.

Once the outdoor temperature is displayed on the Temperature Station, the DCF

tower icon in the clock display will start flashing in the upper left corner. This

indicates that the clock has detected that there is a radio signal present and is trying

to receive it. When the time code is received, the DCF tower becomes permanently

lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear

at all, then please take note of the following:

•Recommended distance to any interfering sources like computer monitors or

TV sets is a minimum of 1.5 - 2 meters.

•Within ferro-concrete rooms (basements, superstructures), the received signal

is naturally weakened. In extreme cases, please place the unit close to a

window and/ or point its front or back towards the Frankfurt transmitter.

Minutes (flashing)

•During nighttime, the atmospheric disturbances are usually less severe and

reception is possible in most cases. A single daily reception is adequate to

keep the accuracy deviation below 1 second.

MANUAL SETTING

The following manual settings can be done in the setting mode:

•Manual time

•Calendar

•12/24 hour time display

•Time zone

•Time reception ON/OFF (DCF ON/OFF)

•Temperature unit °C/°F setting

Press and hold the SET key for about 3 seconds to advance to the setting mode:

MANUAL TIME SETTING

In area where reception of the DCF-77 time is not possible, the time can be manually

set. The clock will then be a normal Quartz clock. Once the DCF signal is detected, it

will change the manually set time into the received time. Please proceed the

following setting steps at the first time before using the Temperature Station.

1. The hour digit in the time section starts flashing. Use the MIN/MAX/+ key to

set the hour.

Hours (flashing)

Month (flashing)

2. Press the SET key to enter the minutes. The minute digits start flashing.

3. Use the MIN/MAX/+ key to set the minute.

4. Press again the SET key to confirm and enter the Calendar setting mode.

Note:

The unit will still try and receive the signal despite it being manually set. When it

does receive the signal, it will change the manually set time into the received time.

CALENDAR SETTING

The date default of the Temperature station is 1. 1. in the year 2008. Once the radio-

controlled time signals are received, the date is automatically updated. However, if

the signals are not received, the date can also be set manually:

1. The year digits will start flashing. Use the MIN/MAX/+ key to set the year

(2008 to 2029).

2. Press the SET key to enter the month (the month digit will be flashing). Use

MIN/MAX/+ key to adjust the month.

3. Then press the SET key to enter the day. Use MIN/MAX/+ key to adjust the

day.

Year (flashing)

Day (flashing)

Weekday (flashing)

Andere Handbücher für WS9090

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WIRELESS 868 MHz Bedienungsanleitung

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9029U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84343 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-1516-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7213U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 061317 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9004U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS1600IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6812 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1415BLv2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology ED31411 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3610U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BL Abmessungen

La Crosse Technology

La Crosse Technology WS-9117U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS7034UITCA Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung