La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

WS-9080U-IT

915 MHz WIRELESS TEMPERATURE STATION

Instruction manual

Contents

Language Page

___________________________________________________________________

English 1

French 41

Spanish 79

TABLE OF CONTENTS

Topic Page

Inventory of Contents 3

Features 4

Setting Up 6

Battery Installation 10

Function Keys 12

LCD Screen and Settings 14

Atomic Time -WWVB Radio Controlled Time 16

Manual Settings 17

Display of Indoor Temperature Reading 25

Display of Outdoor Temperature Reading 26

Display of Indoor Minimum and Maximum records 26

Display of Outdoor Minimum and Maximum records 28

Daily Indoor Minimum and Maximum Temperature display 29

Daily Outdoor Minimum and Maximum Temperature display 30

915 MHz Reception 31

Mounting 32

Care and Maintenance 34

Specifications 35

Warranty 36

INSTANT TRANSMISSION is the state-of-the-art new

wireless transmission technology, exclusively

designed and developed by LA CROSSE

TECHNOLOGY. INSTANT TRANSMISSION offers you

an immediate update (every 4 seconds!) of all your

outdoor data measured from the sensors: follow your

climatic variations in real-time!

This product offers:

INVENTORY OF CONTENTS

1. Wireless Temperature Station

2. Wireless Temperature Sensor (TX29U) and mounting bracket.

3. Instruction Manual and Warranty Card.

FEATURES:

The Temperature Station

Foldout

Stand

Battery

compartment

cover

Function

Keys

LCD

Display

Hanging hole

•Atomic Time function (WWVB Radio controlled time) or manual time setting options

•Atomic Time reception On/Off

•Daylight Saving Time ON/OFF

•12/24 hour display

•Hour and minute display

•Calendar display

•Time zone option ±12 hours

•Wireless transmission at 915 MHz

•Outdoor signal reception intervals at 4-second

•Temperature display in degrees Fahrenheit (°F) or Celsius (°C) selectable

•Indoor and Outdoor temperature display with MIN/MAX recording (records can be

reset)

•Can receive up to 3 outdoor sensors

•Daily minimum and maximum indoor temperature display

•Daily minimum and maximum outdoor temperature display

•Low battery indicator

•LCD contrast adjustable

•Table standing/ Wall mounting

The Outdoor Temperature Sensor

•Remote transmission of outdoor temperature to

Temperature Station by 915 MHz

•Water-resistant casing

•Wall mounting case (Mount in a sheltered place. Avoid

direct rain and sunshine)

SETTING UP:

When one Sensor is used

1. First, insert the batteries into the temperature sensor. (see “Install and replace

batteries in the temperature sensor“).

2. Immediately after and within 30 seconds, insert the batteries into Temperature

Station (see “Install and replace batteries in the Temperature Station”). Once

the batteries are in place, all segments of the LCD will light up briefly. Following the

time as 12:00 and the indoor temperature will be displayed. If these are not

displayed after 60 seconds, remove the batteries and wait for at least 10 seconds

before reinserting them.

3. After inserting the batteries into the sensor, the Temperature Station will start

receiving data from the sensor. The outdoor temperature and the signal reception

icon should then be displayed on the Temperature Station. If this does not happen

after 5 minutes, the batteries will need to be removed from both units and reset from

step 1.

4. In order to ensure sufficient 915 MHz transmission however, there should be no more

than 330 feet (100 meters) between the final position of the Temperature Station and

the sensor (see notes on “Mounting” and “915 MHz Reception”).

5. Once the remote temperature has been received and displayed on the Temperature

Station, the WWVB time code reception is automatically started. This takes typically

between 3-5 minutes in good conditions—but may take up to 4 nights.

When more than one sensor is to be used

1. User shall remove all the batteries from the Temperature Station and sensors and

wait 60 seconds if setting has been done with one sensor before.

2. Insert the batteries to the first sensor.

3. Within 30 seconds of powering up the first sensor, insert the batteries into to the

Temperature Station. Once the batteries are in place, all segments of the LCD will

light up briefly. Following time as 12:00 and the indoor temperature will be displayed.

If they are not shown in LCD after 60 seconds, remove the batteries and wait for at

least 60 seconds before reinserting them.

4. The outdoor temperature from the first sensor (channel 1) should then be displayed

on the Temperature Station. Also, the signal reception icon will be displayed. If this

does not happen after 2 minutes, the batteries will need to be removed from both

units and reset from step 1.

5. Insert the battery into the second sensor immediately after (within 10 seconds after)

the reading form the first sensor is shown on LCD.

6. The outdoor temperature from the second sensor and the "channel 2" icon should

then be displayed on the Temperature Station. If this does not happen after 2 minute,

the batteries will need to be removed from all the units and reset from step 1.

7. Insert the batteries into the third sensor immediately after (within 10 seconds after)

ithe reading from the second sensor is shown on LCD.

8. Then within 2 minutes, the channel 3 outdoor data from the third sensor will be

displayed and the channel icon will shift back to "1" once the third sensor is

successfully received. If this is not happen, user shall restart the setting up from step

9. In order to ensure sufficient 915 MHz transmission there should be a distance of no

more than 330 feet (100 meters) between the final position of the Temperature

Station and the sensor (see notes on “Mounting” and “915 MHz Reception”).

Note:

•Transmission problems will arise if the setting for additional sensors is not followed as

described above. Should transmission problems occur, it is necessary to remove the

batteries from all units and follow the set-up from step 1.

•If the signal reception is not successful on the first frequency (915MHz) for 45

seconds, the frequency is changed to 920MHz and the learning is tried for another 45

seconds. If still not successful the reception is tried for 45 seconds on 910MHz. This

will also be done for re-synchronization.

10. Once the remote temperature has been received and displayed on the Temperature

Station, the WWVB time code reception is automatically started. This takes typically

between 3-5 minutes in good conditions.

IMPORTANT:

•Transmission problems will arise if the setting for additional sensors is not followed as

described above. Should transmission problems occur, it is necessary to remove the

batteries from all units and follow the set-up from step 1.

•If after 10 minutes, the Atomic auto-set time (WWVB time) has not been received,

press the SET key to manually enter a time initially.

•Daily WWVB reception is attempted at full hour between 12:00 am to 6:00 am. If the

Andere Handbücher für KCombo3 WS-9080U-IT WS-9640U-IT

Inhaltsverzeichnis

Sprachen:

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology S88907V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8015TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9740U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology K84322 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9057U-IT-LC Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-1414 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9065TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9018U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V30V2 Abmessungen

La Crosse Technology

La Crosse Technology 327-1417BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9410TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9611U-IT Handbuch

La Crosse Technology

La Crosse Technology S77925V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85784 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7220U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7044UA Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7075U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9014 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7034TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9410TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9125TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology C85845v4 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung