Labconco Purifier Logic+ 30348 Bedienungsanleitung

LABCONCO CORPORATION

8811 Prospect Avenue

Kansas City, MO 64132

(800) 821-5525 I +1 (816) 333-8811

labconco@labconco.com

Please read this manual before

operating equipment

Original Instructions

User’s Manual

Logic+® Type B2 Biosafety Cabinets

2019—Present (Catalog Numbers Ending in -x1)

30348xxxx 30368xxxx

Labconco Corporation reserves the right to make periodic design changes without obligation to

notify any person or entity of such change.

Returned or Damaged Goods

Do not return goods without the prior authorization from Labconco. Unauthorized returns will not

be accepted. If your shipment was damaged in transit, you must file a claim directly with the freight

carrier. Labconco Corporation and its dealers are not responsible for shipping damages.

The United States Interstate Commerce Commission rules require that claims be filed with the

delivery carrier within fifteen (15) days of delivery.

Limitation of Liability

The disposal and/or emission of substances used in connection with this equipment may be

governed by various federal, state, or local regulations. All users of this equipment are required to

become familiar with any regulations that apply in the user’s area concerning the dumping of waste

materials in or upon water, land, or air and to comply with such regulations. Labconco Corporation

is held harmless with respect to user’s compliance with such regulations.

Contacting Labconco Corporation

If you have questions that are not addressed in this manual, or if you need technical assistance,

contact Labconco’s Customer Service Department or Labconco’s Product Service Department at

(800)-821-5525 or +1-(816)-333-8811, between the hours of 7:30 a.m. and 5:30 p.m., Central

Standard Time.

Part #3848331 Rev. C

ECO L847

Warranty

Labconco Corporation provides a warranty to the original buyer for the repair or replacement of parts and

reasonable labor as a result of normal and proper use of the equipment with compatible chemicals. Broken

glassware and maintenance items, such as filters, gaskets, light bulbs, finishes and lubrication are not

warranted. Excluded from warranty are products with improper installation, erratic electrical or utility supply,

unauthorized repair and products used with incompatible chemicals.

Purifier®Logic®+ Biological Safety Cabinets and PuriCare®Procedure Stations carry a five-year warranty from

date of installation or six years from date of shipment from Labconco, whichever is sooner. Warranty is non-

transferable and only applies to the owner (organization) of record.

Buyer is exclusively responsible for the set-up, installation, verification, decontamination or calibration of

equipment. This limited warranty covers parts and labor, but not transportation and insurance charges. If the

failure is determined to be covered under this warranty, the dealer or Labconco Corporation will authorize repair

or replacement of all defective parts to restore the unit to operation. Repairs may be completed by 3rd party

service agents approved by Labconco Corporation. Labconco Corporation reserves the rights to limit this

warranty based on a service agent’s travel, working hours, the site’s entry restrictions and unobstructed access

to serviceable components of the product.

Under no circumstances shall Labconco Corporation be liable for indirect, consequential, or special damages of

any kind. This warranty is exclusive and in lieu of all other warranties whether oral, or implied.

TABLE OF CONTENTS

1: INTRODUCTION 7

2: PREREQUISITES 8

Clearance Requirements 8

Location Requirements 9

Exhaust Requirements 10

Concurrent Balance Volumes 10

Electrical Requirements 11

Service Line Requirements 12

3: GETTING STARTED 13

Unpacking the Cabinet 14

Preparing the Cabinet for Operation 15

Moving and Lifting the Cabinet 15

Installing the Cabinet on an Existing Work Surface 15

Installing the Cabinet on a Labconco Base Stand 16

Telescoping Base Stands 16

Manual or Electric Hydraulic Lift Base Stands 16

Exhaust System Connections 17-18

Exhaust System Requirements 18

Connecting the Cabinet to Utility Service Lines 18-19

Optional Vacu-PassTM Cord and Cable Portal Use 20

Installing the Drain Valve 21

Initial Certification 22

4: PERFORMANCE FEATURES & SAFETY PRECAUTIONS 23

HEPA Filters 23-24

ULPA Filters 24

Laminar Airflow 25

Directional Airflow 26

Motor/Blower 27

Airflow Sensor 27

Cabinet Grilles, Ductwork & Air Balance Controls 28

Ultraviolet (UV) Lamp 28

Safety Precautions 29-30

5: USING THE CABINET 31

System Reset Switch 31

Information Center 32

Alarm Screens 33-34

Operating the Sliding Sash 35

Starting the Cabinet 35

Using the Cabinet Keypad 36

Navigating the Cabinet Menu Screens 37

Navigating the Configuration Submenu 38-40

Activating a Startup Tone 38

Selecting a Language 38

Setting the Clock 39

Setting Automatic Operation Options 40

Navigating the Settings Submenu 41-42

Selecting the Units of Measure 41

Activating the Security Lock 41

Setting the USB Output Rate 41

Navigating UV Parameters 42

The Tools Submenu 42

Timer Operation 43

Interval Timer Operation 43

Stopwatch Timer Operation 43

If An Airflow Alert Activates 44

Resetting the Airflow Alert System 44

Working in the Cabinet 44-46

6: MAINTAINING THE CABINET 47

Suggested Maintenance Schedule 48

Service Operations 49-54

Work Surface Removal 49

Front Grille Removal 49

Towel Catch Removal 50

Front Panel Removal & Installation 51

Changing the LED Lamps 52-53

Changing the Optional UV Lamp 53

Resetting a Circuit Breaker 54

Storage 54

7: TROUBLESHOOTING 55-58

APPENDIX A: COMPONENTS 59

APPENDIX B: DIMENSIONS 60

APPENDIX C: SPECIFICATIONS 61

Electrical Data 61

Motor Specifications 61

Environmental Conditions 62

APPENDIX D: ACCESSORIES 63

APPENDIX E: QUICK CHART 64

CAUTION –See Manual. When this symbol is on the unit it

indicates a caution that is detailed in this manual.

ATTENTION - Voir manuel. Lorsque ce symbole est allumé

l'appareil, il indique une mise en garde qui est indiqué

dans ce manuel.

1: Introduction

Congratulations on the purchase of a Labconco®Purifier© Biosafety Cabinet. The

cabinet is designed to protect you, the product and the laboratory environment

from biohazardous aerosols. It is the result of years of experience in

manufacturing biohazard cabinetry, and users like you suggested many of its

features to us.

This cabinet offers many unique features to enhance safety, performance and

ergonomics. To take full advantage of them, please acquaint yourself with this

manual and keep it handy for future reference. If you are unfamiliar with how

biosafety cabinets operate, please review Section 4: Performance Features and

Safety Precautions before you begin working in the cabinet. Even if you are an

experienced cabinet user, please review Section 5: Using the Cabinet; it describes

the cabinet’s features so that you can use it efficiently.

This manual and other technical documents are available for download at

our website: labconco.com.

If the unit is not operated as specified in this manual it may impair the

protection provided by the unit.

Si l'unité n'est pas utilisée comme spécifié dans ce manuel il peut diminuer

la protection fournie par l'unité.

2: Prerequisites

Before you install the cabinet, you need to prepare the site for installation.

Examine the location where you intend to install it. You must be certain that the

area is level and of solid construction. In addition, a dedicated source of electrical

power must be located near the installation site.

This section lists all requirements for:

Clearance

Location

Exhaust

Electrical

Service Lines

Refer to Appendix C: Specifications, for complete cabinet electrical and

environmental conditions and specifications.

Clearance Requirements

A minimum clearance of at least 6 inches (150 mm) is suggested on the top and

both sides of the cabinet for service.

Refer to Appendix B: Dimensions, for complete cabinet model dimensions.

2: Prerequisites

Location Requirements

The cabinet should be located away from traffic patterns, doors, fans, ventilation

registers, fume hoods and any other air-handling devices that could disrupt its

airflow patterns. All windows in the room should remain closed. Figure 2-1 shows

the preferred location for the cabinet.

Preferred location Air register blocked or redirected

to prevent cabinet disruption

Alternate location

Main Disconnect Device

(Power cord plug in back

of the electronics

module).

Do not position the unit so that it is difficult to operate the main disconnect

device.

Ne placez pas l'appareil de sorte qu'il est difficile de faire fonctionner le

dispositif principal de déconnexion.

Figure 2-1

2: Prerequisites

Exhaust Requirements

NOTE: THE EXHAUST BLOWER CANNOT RUN AT ITS NOMINAL FLOW RATE

WITH THE SASH COMPLETELY CLOSED. IF YOU CHOOSE TO CLOSE THE

SASH COMPLETELY TO USE THE UV LIGHT FOR SURFACE DISINFECTION,

THEN THE EXHAUST BLOWER MUST BE SHUT OFF, OR ITS FLOW RATE

REDUCED 90% OR MORE FOR PROPER OPERATION. THE LOGIC+ HAS AN

OPTIONAL EN/CONTACT CIRCUIT BOARD THAT HAS DRY CONTACTS THAT

CAN BE CONFIGURED TO SIGNAL THE EXHAUST BLOWER TO TURN ON

WHEN THE LOGIC+’s BLOWER IS ON. FOR FURTHER INFORMATION,

CONTACT LABCONCO’S PRODUCT SERVICE DEPARTMENT. AS AN

ALTERNATIVE, A REMOTE ELECTRICAL SWITCH FOR THE EXHAUST

BLOWER CAN BE INSTALLED NEAR THE LOGIC+.

Before deciding on a location, examine it carefully to ensure that it accommodates

the cabinet’s exhaust duct. The area directly above the cabinet’s exhaust port

should be clear of structural elements, water and utility lines, or other fixed

obstructions. There should be enough clearance to allow for the passage of a 10"

stainless steel duct. Avoid cabinet locations that require either an elbow directly on

top of the cabinet’s exhaust connection or an excessive number of elbows to clear

other items. For a further discussion of the cabinet’s exhaust system

requirements, please go to Section 3: Getting Started.

Concurrent Balance Volumes (CBV)

NOTE: THE CBV IS ESTABLISHED BY NSF DURING LISTING TESTING. THE

STATIC PRESSURE LISTED IS MEASURED AT THE BSC’S CONNECTION TO

THE EXHAUST SYSTEM. THE VALUES PUBLISHED INCLUDES 0.7 INCHES

OF FILTER LOADING, FROM THE BSC’S ORIGINAL PRESSURE. IN ORDER

TO OBTAIN MAXIMUM EXHAUST HEPA FILTER LOADING, THE SYSTEM

SHOULD BE CAPABLE OF GENERATING A STATIC PRESSURE 1.3 INCHES

HIGHER THAN THOSE NOTED.

Concurrent Balance Values

Traverse Exhaust Volume

(CFM)

734

1191

Differential Pressure (in. H20)

1.7

2.1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Labconco Laborausrüstung Handbücher

Labconco

Labconco Protector Echo 180 Series Bedienungsanleitung

Labconco

Labconco Protector XStream 9840400 Bedienungsanleitung

Labconco

Labconco RapidStill I Bedienungsanleitung

Labconco

Labconco CentriVap 73100 Series Bedienungsanleitung

Labconco

Labconco Protector XStream 11041 Series Bedienungsanleitung

Labconco

Labconco FreeZone 7750000 Bedienungsanleitung

Labconco

Labconco Logic+ A2 Bedienungsanleitung

Labconco

Labconco Precise 5220100 Bedienungsanleitung

Labconco

Labconco Purifier Axiom 30441 Series Bedienungsanleitung

Labconco

Labconco CentriVap 78110-00 Bedienungsanleitung

Labconco

Labconco Capture BT 31700-00 Bedienungsanleitung

Labconco

Labconco Axiom C1 Bedienungsanleitung

Labconco

Labconco Protector 3390000 Bedienungsanleitung

Labconco

Labconco Purifier Logic+ 30132 Bedienungsanleitung

Labconco

Labconco Protector 3410000 Bedienungsanleitung

Labconco

Labconco CentriVap DNA Systems Bedienungsanleitung

Labconco

Labconco CentriVap Complete 73150 Series Bedienungsanleitung

Labconco

Labconco Purifier 3951400 Bedienungsanleitung

Labconco

Labconco CApture 3420000 Bedienungsanleitung

Labconco

Labconco Purifier Logic+ 30231 Bedienungsanleitung

Labconco

Labconco FreeZone 6 Bedienungsanleitung

Labconco

Labconco FreeZone Plus Bedienungsanleitung

Labconco

Labconco Protector XL 1110 Series Bedienungsanleitung

Labconco

Labconco 5530000 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung