LaserLiner Greenline-Laser 1 Pro Bedienungsanleitung

Greenline-Laser 1 Pro

Bedienungsanleitung

Operating instructions

Gebruiksaanwijzing

Betjeningsvejledning

Mode d´emploi

Instrucciones para su uso

Istruzioni d'uso

Instrukcja Obsługi

Käyttöohje

Instruções de uso

FIN

3-8

9-14

15-20

21-26

27-32

33-38

39-44

45-50

51-56

57-62

036.00.00A / Rev 09.06

Greenline-Laser 1 Pro

ENGLISH 9

Green line laser for all floor and wall work.

Greenline-Laser, 522-542 nm, for ground applications as well as for

horizontal and vertical levelling directly on the wall. The length and intensity

of the laser line can be adjusted. The laser is fixed to the wall using special

pins and precisely aligned through the eccentric adjustment. Parallel shifts

can be performed through the exact alignment of the laser line to the body

edges. Additional magnets on the underside also allow the device to be

mounted on steel structures. Precision: 3 mm / 10 m.

Incl.: High-performance rechargeable battery, mains unit / battery charger,

laser enhancement glasses and carrying case.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of

reach of children. Never intentionally aim the device

at people. This is a quality laser measuring device

and is 100% factory adjusted within the stated

tolerance. For reasons of product liability, we must

also draw your attention to the following: Regularly check the calibration

before use, after transport and after extended periods of storage. We also

wish to point out that absolute calibration is only possible in a specialist

workshop. Calibration by yourself is only approximate and the accuracy of

the calibration will depend on the care with which you proceed.



Note:

This product is a precision instrument that must be handled and

treated with care. Avoid shocks and impact. Always keep and carry in the

case! For cleaning, use a soft cloth and glass cleaner.

LASER LIGHT

DO NOT LOOK INTO

THE BEAM!

CLASS 2 M LASER

EN 60825-1:2003-10

Warranty:

The warranty period is 2 years from the date of purchase. The warranty

covers all material or manufacturing defects occurring during this time. The

following are excluded from warranty: Damage due to improper use (e.g.

operation with wrong type of current/voltage, connection to unsuitable

power source, fall onto hard surface, etc.) or improper storage, normal wear

and tear, and defects which only insignificantly impair the value or suitability

for use. Any tampering by unauthorised persons will render this warranty

void. In the event that you need to claim warranty, please take the complete

device together with all information and the invoice to one of our dealers or

send it in to Umarex-Laserliner.

Greenline-Laser 1 Pro

ENGLISH10

2345



Note: The horizontal and vertical spirit levels are intended solely for

applications on walls. The spirit levels are not suitable for floor applications

because they are not adjusted to the bearing area. Therefore the device

cannot be used as a water level.

1Laser exit window

2Horizontal spirit level for

applications on walls

3Vertical spirit level for

applications on walls

4Battery compartment

5Eccentric adjustment

6On/off switch

7Operating display

8Adjustment wheel for

adjusting the intensity

distribution and length

of the laser line

9Magnets

10 Fastening pins

11 Mains adapter/charger

connecting socket

Charging the accu

• Before using the Greenline-Laser 1 Pro,

fully charge the accu.

• Open the battery compartment (4),

insert the accu and connect the plug

to the socket. The plug fits in the

socket in one position only. Reclose the

battery compartment.

• Connect the battery charger / mains

unit to a mains source and plug into

the socket (11). Please only use the

charger/mains unit supplied with the

device. If a different one is used, the warranty will become void.

• The device can also be operated with standard alkali batteries (4 x type

AA). Insert the batteries as shown by the installation symbols. Ensure the

polarity is correct.

• If the LED (7) blinks constantly, either the batteries must be exchanged or

the accu recharged.

Greenline-Laser 1 Pro

ENGLISH 11



Note: Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry

batteries must not be recharged. Used batteries must not be disposed of as

household waste. Please take them to a collection point for used batteries or for

special waste. Ask your local authority for further details. Batteries with the

recycling symbol can also be returned to our dealerships or to our Technical

Service.

Green laser technology

Unlike red lasers, green laser light can only be indirectly generated. Because

of the system, therefore, fluctuations may occur:

• Different levels of line brightness between one device and another.

• The optimum operating temperature is 20°C. Outside of the working

temperature range of 0-40°C, green lasers become darker.

TIP: Before switching on the device, wait until it has had time to adjust to

the ambient temperature.

These fluctuations are excluded from claims.

Greenline-Laser 1 Pro

ENGLISH12

Due to the physiology of the human eye green appears brighter to us than

red. Therefore green lasers are highly visible compared to customary red

lasers. They enable applications on dark surfaces, longer distances and

performance of work in very bright ambient light.

Floor applications

• Put the device on the floor and switch it on using

the on/off switch (6).

• A green laser line is projected. The intensity

distribution and length of the laser line can be

adjusted using the adjustment wheel (8). Thus

maximum visibility of the laser line is guaranteed,

particularly on dark floors, in very bright ambient

light or on uneven surfaces.

• The spirit levels (2,3) do not have any function in this application area, see

also the note on page 10.

• 45° and 90° angles can be installed with the optional installation plate (Art.

no.: 036.01), see next page.

Wall applications

• First fix one of the two fastening pins (10) in the

desired position on a drywall.

• Then attach the device with the fastening hole at

the front to the pin, pre-adjust it horizontally and/or

vertically with the spirit levels (2,3) and fix it on the

wall with the second pin.

• Align the device exactly horizontally and/or

vertically with the eccentric adjustment and the

fastening pins. Adjust the intensity distribution if

required (Adjustment wheel 8).

• IMPORTANT: For horizontal levelling always carry out alignment with the

upper spirit level!

Parallel projection

The body edges can be used to carry out parallel

translations and depict 90° angles.

Greenline-Laser 1 Pro

ENGLISH 13

Technical data

Precision +3 mm / 10 m

Working range (depending on ambient brightness) ca. 30 m

Laser wavelength 522 – 542 nm

Line laser / Laser output rating Classe 2 M / < 5 mW

Rechargeable battery operating time /

Recharging time

ca. 8 h /

ca. 16 h

Battery operating time ca. 16 h / 4 x Typ AA

Weight 0,5 kg

Operating temperature 0°C ... + 40°C

Storage temperature -10°C ... + 70°C

Order number 036.00.00 A

Subject to technical alterations 09/2006



Note:

Regularly check the calibration before use, after transport and after

extended periods of storage.

Working with accessories

Floor tiles can be installed exactly and

efficiently with the optional

installation plate (Art. no. 036.01).

Now the device can easily project 45°

and 90° alignments. Work can be

performed with one as well as several

devices.

Greenline-Laser 1 Pro

ENGLISH



Note:

If points A1 and A5 are more than 3 mm / 10 m, the device is in need of

calibration. Contact your authorised dealer or else the UMAREX-

LASERLINER Service Department.

Checking horizontal calibration:

1. Mark point A1 on the wall. Attach the device in the centre of point A1,

align it, and switch it on. Adjust the laser line so that it reaches the end of

the wall, see page 12.

2. Mark point A2 and continue until point A5 is marked. Divide the distance

between A1 and A5 by the overall length (S1 + S2 + S3 + S4). The device

is within the tolerance if the difference between A1 and A5 is not greater

than 3 mm / 10 m.

Checking vertical calibration:

Fix a plumb bob with a line at least 2.5 m in length on the wall, making sure

that the bob can swing freely. Attach the device at the end of the plumb line

in the centre, align it vertically and switch it on. The precision is within the

tolerance if the deviation between the laser line and plumb line is not greater

than 3 mm / 10 m.

GmbH & Co KG

Donnerfeld 2

59757 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: -333

www.laserliner.com

Dirección de envío y de servicio

post-venta:

Telefon: +49 2932 638-300

Fax +49 2932 638-333

Indirizzo servizio manutenzione

- Indirizzo di spedizione

Telefono +49 2932 638-300

Fax +49 2932 638-333

Adres serwisu i wysyłki:

Telefon Serwisu+49 2932 638-300

Fax +49 2932 638-333

Huolto- ja lähetysosoite:

Puhelin +49 2932 638-300

Fax +49 2932 638-333

Endereço de serviço e envio:

Telefone +49 2932 638-300

Fax +49 2932 638-333

Service- und Versand-Anschrift:

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Service- and Shipping Address:

Service phone +49 2932 638-300

Fax +49 2932 638-333

Service- en verzendadres:

Servicetelefoon +49 2932 638-300

Fax +49 2932 638-333

Service- og Postadresse

Service-Telefon +49 2932 638-486

Fax +49 2932 638-489

Livraison et expédition:

Telefon: +49 2932 638-300

Fax +49 2932 638-333

Umarex GmbH & Co KG

– Laserliner –

Möhnestraße 149, 59755 Arnsberg, Germany

[email protected]

FIN

Greenline-Laser 1 Pro

LASERSTRAHLUNG

NICHT IN DEN

STRAHL BLICKEN!

LASER KLASSE 2 M

EN 60825-1:2003-10

Andere LaserLiner Laser-Nivelliergerät Handbücher

LaserLiner

LaserLiner PowerPlane-Laser 3G Bedienungsanleitung

LaserLiner

LaserLiner PowerCross-Laser 8 S Bedienungsanleitung

LaserLiner

LaserLiner EasyCross-Laser Bedienungsanleitung

LaserLiner

LaserLiner AutoCross-Laser ACL 2C RX Bedienungsanleitung

LaserLiner

LaserLiner SuperSquare-Laser 2G Bedienungsanleitung

LaserLiner

LaserLiner DigiLevel Compact Bedienungsanleitung

LaserLiner

LaserLiner DigiLevel Pro 120 Bedienungsanleitung

LaserLiner

LaserLiner AutoCross Laser 2 Bedienungsanleitung

LaserLiner

LaserLiner AutoLite-Laser Green Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser Compact Bedienungsanleitung

LaserLiner

LaserLiner SuperPlane-Laser 3D Bedienungsanleitung

LaserLiner

LaserLiner LaserCube Bedienungsanleitung

LaserLiner

LaserLiner X3-Laser Bedienungsanleitung

LaserLiner

LaserLiner PrecisionCross-Laser PCL 8 Bedienungsanleitung

LaserLiner

LaserLiner SmartCross-Laser Bedienungsanleitung

LaserLiner

LaserLiner Quadrum DigiPlus Bedienungsanleitung

LaserLiner

LaserLiner TITANIUM Bedienungsanleitung

LaserLiner

LaserLiner CompactPlane-Laser 3G Pro Bedienungsanleitung

LaserLiner

LaserLiner DigiLevel Plus Bedienungsanleitung

LaserLiner

LaserLiner PowerPlane-Laser 3D Bedienungsanleitung

LaserLiner

LaserLiner BeamControl-Master Bedienungsanleitung

LaserLiner

LaserLiner AutoCross-Laser 2 Plus Bedienungsanleitung

LaserLiner

LaserLiner HandyLaser Bedienungsanleitung

LaserLiner

LaserLiner PowerCross-Laser 5G Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung

Fixturlaser

Fixturlaser NXA D I-0912 Bedienungsanleitung

Wacker Neuson

Wacker Neuson PAL450 Bedienungsanleitung

Metrica

Metrica 33806 Bedienungsanleitung