Lava DSerial-PCI Powered Bedienungsanleitung

Lava DSerial-PCI Powered

Quick Installation Guide

Rev. B00

LAVA

COMPUTERS

DSerial PCI

Powered Pin1 12V

Pin9 5 V

P.N. MOKO L71.5_pwr

MADE

CANADA

PN MOKO S-1

MADE IN JAPAN

0255351

NOTE: Hardware Design

Windows NT 4.0 Installation

1. With the power turned off, insert the DSerial-PCI Powered card into

any free PCI slot in your PC.Boot NT logging on as“Administrator”.

Place the DSerial-PCI

installation diskette into your floppy

drive and select Run from the Start

Menu.When prompted type:

A:\NT4.0\Setup.

2. After the necessary files have been

copied, select My Computer and start

Control Panel. A new icon will appear

Powered

The DSerial-PCI Powered has non-standard serial pin designations. It

supplies 12 VDC to pin 1 on both ports, and 5 VDC to pin 9 on both

ports.These pins are fused to allow a maximum amperage of 1.25 amps

per port @ 20 degrees nominal temperature.

Not all serial port control lines are

implemented on the DSerial-PCI

Powered. Please refer to the

pinout diagram to determine the

suitability of the DSerial-PCI

Powered for your needs.

The DSerial-PCI Powered

carries power on pins

conventionally used as Data Carrier Detect (DCD) and Ring Indicator (RI).

As these signals are inputs to the DTE device, care should be taken that

DCE devices connected to the DSerial-PCI Powered do not supply

problematic input voltages to the DTE device across these pins. If you

are unsure of the suitability of connecting a specific peripheral to the

DSerial-PCI Powered,, consult Lava Technical Support.

NOTE:

1 2 3 4 5

6 7 8 9

#1 12 VDC

#2 Receive Data (RX)

#3 Transmit Data (TX)

#4 not used

#5 Signal Ground/Common (GND)

#6 not used

#7 Request to Send (RTS)

#8 Clear to Send (CTS)

#9 5 VDC

DOS and Windows 3.x Installation

OS/2 Installation

1. With the power turned off, insert the DSerial-PCI card into

any free PCI slot in your PC.Turn your PC on.

2. Place the DSerial-PCI installation diskette into your floppy

drive. In the Win3.11\16550 subdirectory of this diskette you will

find a file called“Lavaconf.exe”. Copy this file to your hard drive and

run it.

3. When run, Lavaconf.exe will display two I/O addresses and one IRQ.

These correspond to the addresses and IRQ chosen by your PC when

configuring the DSerial-PCI . Make a note of them.

4. If you are using Windows 3.x, start Windows and go to Control Panel

| Ports. Choose Com 3 for Port 1 and Com 4 for Port 2 on the DSerial-

PCI . Click the Advanced button and enter the I/O address

and IRQ for each port as reported by Lavaconf.exe. Reboot your PC

for these changes to take effect.

Note: DOS & Windows 3.X support a maximum of four Com Ports in a PC.

Powered

1. With the power turned off, insert the DSerial-PCI card into

any free PCI slot in your PC.Turn your PC on.

2. Place the DSerial-PCI installation diskette into your floppy

drive. In the Serial\OS2 subdirectory of this diskette you will find a

file called“Setup.exe”. Running this file will install the DSerial-PCI

Note: Detailed installation instructions in English and French

are available on the installation diskette.

Powered

called“LavaPort”.This applet should now be used to configure ALL

Com Ports in your PC – not just Lava serial ports. Please note that

Com 1 may not appear in this applet if you have your mouse

attached to Com 1.

Windows 95/98/Me/2000/XP Installation

1. With the power turned off, insert the DSerial-PCI card

into any free PCI slot in your PC. Make sure the card is well seated.

Turn your PC on and start Windows.

2. Windows will automatically detect the DSerial-PCI as a

new PCI Serial Controller and ask you to insert the Installation

Diskette.The installation files are located in the root directory of

this disk.

3. After the necessary files have been copied,Windows will

complete the full installation of the DSerial-PCI . During

this process, a Parent device will be created in Device Manager

under Multi-function adapters, and two Child ports will be

created in Device Manager under Ports.To view the installed

configuration, click Control Panel | System.The DSerial-PCI

will appear in the listing as follows:

Powered

The DSerial-PCI hardware appears in Device Manager in

two places: under the Multi-function adapters tree and as part of

the Ports tree. Please note that any changes to the resources (I/O

address and IRQ) used by either of the two ports on the DSerial-

PCI must be made through the Resources page of the

DSerial-PCI PARENT – not through the individual Ports

pages.

Powered

NOTE: Modifying I/O Address and IRQ Resources is NOT

recommended.

Unless you already have more than 4 Com Ports installed in

your PC,Windows will by default configure the DSerial-PCI

as Com5 and Com6. If you wish to change the Com

number of either one of the ports on the DSerial-PCI

(e.g. Assign Port 1 to be Com 3), please use the Lava Com Port

Redirect Utility included in the“Utils“ subdirectory of your

Installation Diskette.This may be necessary because some

communications applications programs do not recognize port

designations beyond Com 4.The Lava Com Port Redirect

Utility will allow you to change the Com numbering of your

ports without changing I/O address resources.

To install the Lava Com Port Redirect Utility on your hard drive,

insert the Installation Diskette into your floppy drive, click

Start, Run and type A:\Utils\Setup.

Powered

Changing the Com numbering of your ports

in Windows 95/98/Me

In Windows 2000 and Windows XP, Com port numbering can

be changed by double-clicking the DSerial-PCI entry

displayed in Windows' Device Manager (as described earlier).

Go to Settings | Advanced, and choose the Com port number

you want.

Powered

Changing the Com numbering of your ports

in Windows 2000/XP

Lava Computer MFG Inc.

Lava

Technical Support

9:00 am to 5:30 pm Monday to Friday (Eastern Time)

Tel: +416 674-5942

Fax: + 416 674-8262

E-mail: tech@lavalink.com

Internet: www.lavalink.com

This device complies with part 15 of the FCC Rules. Operation is subject

to the following conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Lava Computer MFG Inc. 908 Niagara Falls Blvd.#629. North Tonawanda NY 14120-2060

Inhaltsverzeichnis

Andere Lava PCI-Karte Handbücher

Lava

Lava 2SP-PCI Bedienungsanleitung

Lava

Lava Lava SSerial-550 Bedienungsanleitung

Lava

Lava LavaPort 650 Bedienungsanleitung

Lava

Lava SP-PCI Bedienungsanleitung

Lava

Lava 16550 UARTs Bedienungsanleitung

Lava

Lava Lava Port 650 Bedienungsanleitung

Lava

Lava Lava 2SP-PCI Bedienungsanleitung

Lava

Lava Parallel-PCI/LP Card Bedienungsanleitung

Lava

Lava PCI Bus Enhanced Parallel Board Bedienungsanleitung

Lava

Lava Lava Parallel LAVA SSerial-PCIe/LP Bedienungsanleitung

Lava

Lava LAVA SSerial-PCIe Bedienungsanleitung

Lava

Lava LAVA SSerial-PCI/LP Bedienungsanleitung

Lava

Lava LAVA SP-PCI Bedienungsanleitung

Lava

Lava SSerial-PCI/LP Bedienungsanleitung

Lava

Lava LAVA Dual Parallel-PCI Bedienungsanleitung

Lava

Lava Parallel-PCIe Bedienungsanleitung

Lava

Lava QUATTRO-PCI Bedienungsanleitung

Lava

Lava Enhanced Parallel Port Board Bedienungsanleitung

Lava

Lava Parallel-PCI DB-25 Bedienungsanleitung

Lava

Lava QUATTRO-PCI 3.3V Bedienungsanleitung

Lava

Lava Octopus-550 Bedienungsanleitung

Lava

Lava Lava Parallel LAVA SP-PCIe Bedienungsanleitung

Lava

Lava Dual Parallel-PCI Bedienungsanleitung

Lava

Lava DSerial-PCI/LP Card Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung