LELY Splendimo 320 M Bedienungsanleitung

www.lely.com

SPLENDIMO M

240 / 280 / 320

M-H003.0612VT

SPLENDIMO 320 M

OPERATOR’S MANUAL

EN-1

OPERATOR’S MANUAL

SPLENDIMO M

240 / 280 / 320

Mh0030612en-tp.fm

English

SPLENDIMO®is a registered trademark. The right of exclusive use belongs to the companies of the LELY Group.

microfilm or any other way without the prior written permission of LELY INDUSTRIES N.V..

EN-3

TABLE OF CONTENTS....................................................................................................page

PREFACE.......................................................................................................................5

WARRANTY CONDITIONS............................................................................................5

TYPE- AND SERIAL NUMBER OF YOUR MACHINE ...................................................5

SAFETY INSTRUCTIONS..............................................................................................6

EXPLANATION OF SAFETY DECALS ON THE MACHINE..........................................7

1 INTRODUCTION ............................................................................................................8

2 LINKAGE TO THE TRACTOR........................................................................................9

3 TRANSPORT.................................................................................................................10

4 MACHINE ADJUSTMENTS...........................................................................................11

4.1 Mowing height......................................................................................................11

4.2 Ground pressure..................................................................................................11

5 OPERATING THE SPLENDIMO®M..............................................................................12

6 DISMOUNTING FROM THE TRACTOR.......................................................................13

7 MAINTENANCE.............................................................................................................14

7.1 Maintenance after operations ..............................................................................14

7.2 Lubrication...........................................................................................................14

7.3 Intermittent maintenance .....................................................................................15

7.4 Replacement of knives ........................................................................................17

7.5 Change of oil in gearboxes..................................................................................18

7.6 Change of grease in mower elements.................................................................19

Supplements:

A REPAIRS TO THE CUTTER BAR.................................................................................20

B HYDRAULIC SCHEME..................................................................................................22

C OPTIONAL EXTRAS .....................................................................................................23

D TECHNICAL DETAILS...................................................................................................24

EN-5

PREFACE

This Operator’s Manual is meant for personnel that are operating the

machine and are responsible for its daily maintenance.

Kindly read this manual fully prior to starting work.

Such instructions as are related to your safety and/or that of

others are marked in the margin by a warning triangle with

exclamation mark. These instructions should be observed with

particular care and attention.

Instructions which may lead to serious material damage in case

of non-compliance or incorrect use are marked in the margin by

an exclamation mark.

The machine described in this manual may contain components

which do not form part of the standard equipment but are available

as optional extras.

This is not made clear in all cases, because standard specifications

may differ from country to country.

Furthermore, machines and optional extras may be adjusted to

specific regional conditions whilst they are also subject to

permanent research and innovation.

For this reason, the specifications of your machine may not be

consistent with the pictures in this manual.

WARRANTY CONDITIONS

For those parts which fail in normal operating conditions the factory

will make replacement parts available, free of charge, for a period of

12 (twelve) months from the date of purchase.

Warranty shall not apply if the instructions mentioned in this manual

have not been met, or if they have not been met completely or

correctly.

Neither shall warranty apply in case of modification of the machine

by you or third parties without our foreknowledge and/or

authorisation.

TYPE- AND SERIAL NUMBER OF YOUR

MACHINE

The type and serial number plate is fitted on the front side of the

headstock.

In case of correspondence and ordering of spare parts, kindly state

the type- and serial number of your machine.

Complete the box below with these numbers.

Type number

Serial number

EN-6

SAFETY INSTRUCTIONS

- Use the machine only for the purpose for which it was designed.

- Follow all prevailing safety regulations, including those laid

down in this manual and occurring on the machine.

- Operate this machine in a safe way.

- The machine should be operated by authorised persons only.

- Be alert and observe all safety precautions.

- Make sure that all safety guards and protection devices are in

place.

- Keep out of reach of moving parts.

- Stop engine, PTO and moving parts before adjusting, cleaning or

lubricating the machine.

- Take care that nobody will be within the dangerous zone while the

machine is in operation and be sure that people are kept well away

from the machine. This is especially important when working

along roads and near or on fields that are accessible to the public.

- Use always a tractor with a cab.

- Clear the field of objects that could be thrown up by the machine.

- Observe the prevailing legislation for public road transport.

- Use flashing lights or other safety signs, when required.

- Don’t stand on the machine.

- Use genuine LELY parts only.

- Remove the pressure from hydraulic systems before starting work

on them and/or before coupling/ uncoupling hydraulic hoses.

- Use protective clothing, gloves and/or safety glasses if required.

- Clean the safety decals regularly so that they can be read at all

times.

EN-7

EXPLANATION OF SAFETY DECALS ON

THE MACHINE

-Carefully read operator’s manual before handling the machine.

Observe instructions and safety rules when operating.

-Attention! Moving parts.

Stay clear of rotating machine parts.

-Danger of flying objects.

Maintain a sufficient, safe distance from the machine as long as

the tractor engine is running.

-Danger of mower knives.

Maintain a sufficient, safe distance from the machine as long as

the tractor engine is running.

- Never exceed the maximum PTO speed which is obligatory

for the machine.

- If you need to hoist the machine, only use such hoisting points

as are indicated by means of the decals.

-Attention! Moving parts.

Read the operating instruction of the PTO shaft.

Never use a PTO shaft without protection.

EN-8

1 INTRODUCTION

The LELY SPLENDIMO M mower (fig. 1) can be used for mowing

grass fields. A characteristic feature of the SPLENDIMO M mower

is the central attachment of the mower unit allowing optimum

ground contour following.

A tremendous capacity can be realised thanks to the large working

width and high forward speed (up to 15 km/h).

Mowing on slopes up to approx. 20° up and 20° down is within the

machines capability.

The cutter bar is fitted with mower discs, complete with the LELY

SPLENDIMO CLIP quick change system (fig. 2). The cutter bar is

composed of cutting units according to the modular LELY system.

These elements as well as the intermediate spacers are torqued

together by a connecting rod.

The first cutting unit is driven from the top. A springsteel shaft,

which is driven from the first cutting unit, drives the other units of

the cutter bar. Due to this configuration, only little power is

required.

The elements rotate in pairs, either to the left or right.

The SPLENDIMO M mower can be controlled with just one

hydraulic ram. Ground pressure can be adjusted in 3 positions by

repositioning the stop plate of the spring assembly.

A breakback device prevents damage to the machine if an obstacle

is hit.

Andere Handbücher für Splendimo 320 M

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LELY Landwirtschaftliche Geräte Handbücher

LELY

LELY JUNO 150 Einrichtungshandbuch

LELY

LELY ASTRONAUT A3 Next Bedienungsanleitung

LELY

LELY DISCOVERY Bedienungsanleitung

LELY

LELY Juno Bedienungsanleitung

LELY

LELY Splendimo 320 M Bedienungsanleitung

LELY

LELY SPLENDIMO MC Bedienungsanleitung

LELY

LELY Hibiscus 745 CD Vario Bedienungsanleitung

LELY

LELY Attis PT 130 Bedienungsanleitung

LELY

LELY HIBISCUS 425 S Bedienungsanleitung

LELY

LELY 770 P Bedienungsanleitung

LELY

LELY Discovery 120 Collector Bedienungsanleitung

LELY

LELY HIBISCUS 765 SD Vario Bedienungsanleitung

LELY

LELY Tigo 35 S Classic Bedienungsanleitung

LELY

LELY ASTRONAUT Bedienungsanleitung

LELY

LELY Splendimo 320 M Bedienungsanleitung

LELY

LELY HIBISCUS 455 Bedienungsanleitung

LELY

LELY 1250 PROFI Bedienungsanleitung

LELY

LELY Hibiscus 725 CD Classic Bedienungsanleitung

LELY

LELY Juno 100 Originalbetriebsanleitung

LELY

LELY SPLENDIMO 240 MC Bedienungsanleitung

LELY

LELY SPLENDIMO 280 FC Bedienungsanleitung

LELY

LELY LOTUS 1020 Bedienungsanleitung

LELY

LELY Luna Einrichtungshandbuch

LELY

LELY LOTUS 600 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung