Leuze It 1452g Bedienungsanleitung

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0

[email protected] • www.leuze.com

We reserve the right to make changes • DS_IT1452g_en_50130034.fm

Hand-held scanner for bar codes

Transmission to base station via Bluetooth

standard V2.1

Large reading field for detecting high-con-

trast codes

Robust trigger button

Built-in decoder

Indicator upon successful read

RS 232, USB and PS/2 interface

Operating temperature 0°C to 50°C

5 V

Accessories

TTL-RS 232 cable

Part no. 50114517

PS/2 cable

Part no. 50114519

USB cable, 3m

Part no. 50114521

USB helix cable, 5m

Part no. 50114523

Power supply unit

Part no. 50114525

LISTED

IPIP 4242

Dimensioned drawing

6262 8282

173173

Hand-held scanner

IT 1452g 1D-2

with Bluetooth

Bluetooth base station

Base for IT 1452

Electrical connection

for RS 232 cable

for USB cable

for PS/2 cable

9-pin Sub-D Signal Base for IT 1452 RJ41

2TXD4

3RXD5

5GND3

7CTS6

8RTS8

95VDC7

USB type A Signal Base for IT 1452 RJ41

15VDC7

2Data-10

3Data+9

4GND3

Mini DIN connector Mini DIN socket Signal Base for IT 1452 RJ41

1-PCData4

22NC

33GND3

445VDC7

5-PCClock5

66NC

-1KBdata8

-5KBclock6

IT 1452g Hand-held bar code scanner with Bluetooth data transmission

IT 1452g - 01

Specifications and description

en 01-2015/09 50130034

IT 1452g - 01 2015/09

Specifications

Reading field

Electrical data IT 1452g 1D-2 Base for IT 1452

Operating voltage UB3.7V DC internal battery 4.5 … 5.5VDC

Power consumption max. 5W @ 5VDC

Li-ion battery

Capacity 2,000mAh

Max. number of scans 40.000

Max. operating time 14h at 1scan/s

Charging time at 9VDC 4.5h for complete charge following complete discharge

Radio transmission

Frequency 2.4 … 2.4835GHz (ISM band)

frequency hopping, Bluetooth ® V2.1, Class 2

Typ. operating range 10m

Transmission speed up to 1Mbit/s

Interfaces

Interface type RS 232, PS/2 and USB

Trigger via button or serial command

Types of codes

Bar codes 2/5 Interleaved, Code 39, Code 128, Code 93, Codabar, UPC/EAN,

Codablock, GS1 Databar

Optical data

Optical system pixel array 640x480

Symbol contrast PCS 35% minimum

Light source integrated diffuse LED

Read direction omnidirectional, various tilt and rotational angles up to 45°

Mechanical data IT 1452g 1D-2 Base for IT 1452

Weight approx. 210g approx. 180g (without cable)

Dimensions 173x82x62mm 101x131x81mm

Shock resistance 30 falls from a height of 1.5m 50 falls from a height of 1m

Environmental data

Ambient temp. (operation) 0°C … +50°C 0°C … +50°C

Ambient temp. (storage) -40°C … +70°C -40°C … +60°C

Relative humidity 0 … 95% (non-condensing) 0 … 95% (non-condensing)

Light source exempt group (in acc. with EN 62471)

Degree of protection IP 42 IP 41

Certifications IEC 60950-1 (US-19749-A1-UL)

IT 1452g

13 Mil

(0.330 mm)

5 Mil

(0.127 mm)

20 Mil

(0.508 mm)

0 50 100 150 200 250 350 400300

Code 39

UPC

Code 39

Typ. reading distance [mm]

depending on the bar code module

Tables

Remarks

Ergonomically shaped hand-

held scanner with integrated

decoder for high-contrast

codes.

Data transmission via config-

urable RS 232 interface.

Or keyboard-wedge opera-

tion via PS/2 or USB inter-

face.

For a functional unit, an IT

1452g hand-held scanner

and a Base for IT 1452 base

station as well as a power

supply unit and correspond-

ing cable must be ordered.

Bluetooth is a trademark owned by

Bluetooth SIG, Inc., U.S.A. and

licensed to Honeywell.

Operate in accordance with

intended use!

The product may only be put into

operation by competent persons.

Only use the product in accor-

dance with the intended use.

IT 1452g

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 IT 1452g - 01

[email protected] • www.leuze.com

Order guide

Switching off the computer

Information on switching off and shutting down the connected computer - which must always be performed before connecting

peripheral devices, such as a scanner - can be found in the appropriate operating instructions for your computer.

Connecting the base station

Shown in the adjacent figure are the locations for installing the cable on

the base station. The individual installation steps are described in the fol-

lowing.

1.To secure the interface cable to the base station, proceed as follows:

plug the RJ 41 connector into the socket on the bottom of the base sta-

tion until the cable clicks into place.

2.Connect the interface cable to the appropriate connection socket on

the computer.

3.You may need a power supply unit for supplying voltage if you would

like to charge the hand-held scanner via the base station or use an

RS 232 interface. Use the pin assignments (see "Electrical connection"

on page 1) to select the appropriate cable for your application.

4.Connect the power supply unit to the power socket.

5.Use the code for the respective application to configure the hand-held

scanner, see chapter "Parameterization".

6.Check the operational readiness of the scanner by pointing the scan-

ning surface towards a flat surface and pulling the trigger. A green

target line as well as the red illumination should now be visible. Now scan a sample label. The scanner emits an acoustic signal

to confirm that the label has been read; if necessary, the data is now passed on to the computer.

Parameterization

The hand-held scanner can always be configured using 2D-codes. To do this, the 2D-code must first be selected on the package

insert and then the trigger actuated in order to read the code. The configuration is then immediately accepted and executed.

Several of the most important configurations are listed in the following.

A second option is to configure the hand-held scanner with the USB and RS 232 interfaces with the aid of the EZ Config PC

program. You can download and install this program from our homepage at www.leuze.com.

The program can be used to make settings and transfer them to the hand-held scanner. The configuration can also be stored so

that it can be reused at a later time.

More information can also be found in the user's guide.

The standard applications are described and summarized below.

Notice!

Additional information on the device and short instructions can be found on the Internet at www.leuze.com.

Hand-held reader for bar codes (Standard Range) Part no.

IT 1452g 1D-2 with Bluetooth data transmission 50130501

Base station for hand-held bar code scanner with Bluetooth data transmission Part no.

Base for IT 1452 with RS 232, PS/2 and USB interface 50130499

Connection for power sup-

ply unit

Connection for

interface cable

IT 1452g Hand-held bar code scanner with Bluetooth data transmission

IT 1452g - 01 2015/09

Resetting the IT 1452g to factory settings

To reset all parameters to factory settings, scan the adjacent

bar code.

Attention!

All settings are lost!!!

Return the hand-held scanner to the base station to apply the settings. This procedure is concluded with acoustic confirmation

signals.

You may then continue making settings or operation of the device.

Trigger

To activate the read process, a trigger signal is to be sent via the serial RS 232 interface or USB interface (COM port emulation

only). The command is to be sent at the set baud rate, parity, and data and stop bits.

The command for activation is: SYN T CR ASCII decimal values: 022; 084; 013

To cancel read readiness, send a deactivation.

The command for deactivation is: SYN U CR ASCII decimal values: 022; 085; 013

Following a successful read operation, the hand-held scanner deactivates itself.

The second option is activation via the built-in trigger button.

Configuration for the Leuze standard protocol

Scan the adjacent 2D-code.

The hand-held scanner is set to the following transmission parameters:

RS 232 transmission with 9,600 baud, 8 data bits, 1 stop bit, no parity, prefix <STX>,

postfixes <CR><LF>.

IT 1452g

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 IT 1452g - 01

[email protected] • www.leuze.com

Connecting the IT 1452g to the serial PC interface

With TTL-RS232 cable (part no. 50114517)

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base station

1x 50114517 KB 232-1 IT 190x

1x 50114525 Power supply unit

Notice!

Cable KB 232-1 IT190x (part no. 50114517) uses TTL-level (0V…5V) for data transmission. As an alternative to this,

cable KB 232-2 IT190x (part no. 50115105) can be used. This cable works with the regular RS232 level (-12V…+12V)

and therefore features a higher interference rejection. Both cables are connection compatible.

Procedure:

1.Switch off the PC.

2.Connect the interface cable to a free COM port

(RS 232) on the computer (3) and to the base station

(2).

3.Plug one end of the power supply unit cable into the

base station (4) and the other end into a free power

socket (5).

4.Switch the PC back on.

5.Scan the adjacent bar code.

The hand-held scanner is set to the following transmission parameters:

RS 232 transmission with 115,200 baud, 8 data bits, 1 stop bit, no parity, postfixes <CR><LF>.

6.Return the hand-held scanner to the base station to apply the settings. This procedure is concluded with optical confirmation

signals (green LED on the base station).

7.If necessary, adjust the transmission parameters of the used COM port to those of the hand-held scanner.

Attention!

We recommend connecting the base station directly to a PC or to the MA 21 or MA 41… connection units. If connect-

ing to other components, please note that a voltage level range of 0 … +5V (TTL level) is maintained on the data lines!

IT 1452g Hand-held bar code scanner with Bluetooth data transmission

IT 1452g - 01 2015/09

Connecting the IT 1452g to the MA 2xxi

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base station

1x 50115105 RS 232 cable

1x 50114525 Power supply unit

1x 50113397 KB JST-HS-300

1x Connection unit MA 2xxifor the respective fieldbus system:

50112893 MA 204ifor PROFIBUS or

50112892 MA 208ifor Ethernet or

50112891 MA 248ifor PROFINET

Procedure:

1.Insert the KB JST-HS-300 cable into the MA 2xxi.

2.Connect the interface cable to cable KB JST-HS-300.

Connect the interface cable and the power supply unit to the base station (see "Con-

necting the IT 1452g to the serial PC interface").

3.Scan the adjacent 2D code.

The hand-held scanner is set to the following transmission parameters:

RS 232 transmission with 9600 baud, 8 data bits, 1 stop bit, no parity, postfixes

<CR><LF>.

4.Return the hand-held scanner to the base station to apply the settings. This procedure

is concluded with audible confirmation signals.

IT 1452g

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 IT 1452g - 01

[email protected] • www.leuze.com

Connecting the IT 1452g to the MA 21

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base station

1x 50114517 KB 232-1 IT 190x

1x 50114525 Power supply unit

1x 50035421 KB 021 Z

1x 50030481 MA 21 100

Pin assignments KB021 Z:

Core color: Signal Terminal in the MA 21:

Brown (RXD) 26

White (TXD) 27

Blue (GND) 28

Red (VCC) 

Black (GND) 

Bare (shield) (PE) 21

Procedure:

1.Connect cable KB 021 Z to the MA 21… acc. to the above pin assignments.

2.Connect the interface cable to cable KB 021 Z. Connect the interface cable and the power

supply unit to the base station (see "Connecting the IT 1452g to the serial PC interface").

3.Scan the adjacent 2D code.

The hand-held scanner is set to the following transmission parameters:

RS 232 transmission with 9,600 baud, 7 data bits, 1 stop bit, even parity, postfixes

<CR><LF>.

4.Return the hand-held scanner to the base station to apply the settings. This procedure is

concluded with acoustic confirmation signals.

IT 1452g Hand-held bar code scanner with Bluetooth data transmission

IT 1452g - 01 2015/09

Connecting the IT 1452g to the PS/2 interface

The operation of the hand-held scanner in keyboard emulation mode is described in this section. With this operating mode, a PC

keyboard is emulated. The read data are written directly into the currently activated program. The data can thereby be further

processed in all standard programs.

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base sta-

tion

1x 50114525 Power supply unit

1x 50114519 KB PS2-1 IT 1902

Procedure:

1.Switch off the PC.

2.Disconnect the keyboard.

3.Connect the cable for the base station

between the keyboard and the PC.

4.Switch the PC back on.

5.Scan the 2D code shown below.

6.Return the hand-held scanner to the base sta-

tion to apply the settings. This procedure is

concluded with acoustic confirmation signals.

Notice!

To charge the hand-held scanner, the

power supply unit must be plugged in

and the hand-held scanner placed in

the base station.

Disconnect

IT 1452g

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 IT 1452g - 01

[email protected] • www.leuze.com

Connecting the IT 1452g to the USB interface (keyboard emulation)

Operating the hand-held scanner in keyboard emulation mode on a USB port is described in this section. With this operating

mode, a PC keyboard is emulated. The read data is written directly into the currently activated program. The data can therefore

be further processed in all standard programs.

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base station

1x 50114525 Power supply unit

1x 50114521 KB USB-1 IT190x (3m, straight)

1x 50114523 KB USB-2 IT190x (5m, spiral)

Procedure:

1.Connect the cable for the base station to a free USB

port.

2.The scanner acknowledges this connection with a beep.

3.Scan the adjacent 2D code.

Notice!

To charge the hand-held scanner, the power

supply unit must be plugged in and the hand-

held scanner placed in the base station.

IT 1452g Hand-held bar code scanner with Bluetooth data transmission

IT 1452g - 01 2015/09

Connecting the IT 1452g to the USB interface (COM port emulation)

The operation of the hand-held scanner as a serial interface on a USB port is described in this chapter. With this operating mode,

a COM interface is emulated. The read data are sent to a new COM interface. The drivers with which this COM interface is emu-

lated can be downloaded from our homepage at www.leuze.com. Thus, the data can be processed further in programs which

expect data via COM interfaces.

Required parts:

1x IT 1452g 1D-2

1x 50130499 Base for IT 1452 base station

1x 50114525 Power supply unit

1x 50114521 KB USB-1 IT190x (3m, straight)

1x 50114523 KB USB-2 IT190x (5m, spiral)

Procedure:

1.Install the USB serial driver

(current version available at www.leuze.com).

2.Connect the cable for the base station to a free USB

port.

3.The scanner acknowledges this connection with a beep.

4.Scan the adjacent 2D code.

5.Open a terminal program or your program for the serial

interface, select the new COM port, and make the fol-

lowing settings: baud rate 38,400, 8 data bits, 1 stop bit,

no parity, postfix <CR>.

Notice!

To charge the hand-held scanner, the power

supply unit must be plugged in and the hand-

held scanner placed in the base station.

IT 1452g

Inhaltsverzeichnis

Andere Leuze Barcode-Lesegerät Handbücher

Leuze

Leuze BCL 608i SM 102 Bedienungsanleitung

Leuze

Leuze BCL 300i Bedienungsanleitung

Leuze

Leuze BCL604i Bedienungsanleitung

Leuze

Leuze BCL 92 Bedienungsanleitung

Leuze

Leuze DCR 55 Bedienungsanleitung

Leuze

Leuze BPS 3007i Bedienungsanleitung

Leuze

Leuze BCL 900i Bedienungsanleitung

Leuze

Leuze BCL 208i Bedienungsanleitung

Leuze

Leuze HS 6508 Bedienungsanleitung

Leuze

Leuze BPS 338i Bedienungsanleitung

Leuze

Leuze BCL 900i Bedienungsanleitung

Leuze

Leuze HS 6578 Bedienungsanleitung

Leuze

Leuze BCL 648i Bedienungsanleitung

Leuze

Leuze BCL 92 Bedienungsanleitung

Leuze

Leuze BCL 358 Bedienungsanleitung

Leuze

Leuze IT 3800g Bedienungsanleitung

Leuze

Leuze BCL34 Stücklistenhandbuch

Leuze

Leuze BPS 34 Bedienungsanleitung

Leuze

Leuze IT 6320 DPM Einrichtungshandbuch

Leuze

Leuze BPS 3048i Bedienungsanleitung

Leuze

Leuze BCL 40 Stücklistenhandbuch

Leuze

Leuze BPS 8 Bedienungsanleitung

Leuze

Leuze CR 100 Bedienungsanleitung

Leuze

Leuze BCL 8 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung

Leuze it 1452g Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken