Lilin L Series Leitfaden

LILIN IP Camera Start Guide

LILIN IP Camera Start Guide Page2

Summary

LILIN IP Cameras adopt the latest compression technologies, which allow multiple streaming of H.264 or

MJPEG formats in different resolutions. LILIN’s multiple streaming technology transmits digital video at various

bit rates and frame rates to suit both high and low bandwidth network environments.

Our cameras are equipped with progressive-scan, megapixel CMOS sensors that provide superior video

quality. LILIN’s digital signal processing (DSP) technologies support Wide Dynamic Range (WDR), 3D noise

reduction, Backlight Compensation (BLC), ePTZ, region of interest (ROI), adjustable shutter speed, and privacy

masking features for almost every installation environment.

The built-in intelligent video analytics engine enables audio and motion detection. Other useful features include

two-way audio, SD card recording, mobile device live access, email notification with JPEG snapshots, and

JPEG-to-FTP upload.

LILIN cameras, with their latest technologies, provide megapixel H.264 video, outstanding DSP capacities,

built-in video analytics, built-in PoE support, and ONVIF compliant (select models only).

The powerful combination of LILIN Navigator software and IP cameras will maximize your system performance

and deliver an integrated system solution for your migration to IP videos.

LILIN IP Camera Start Guide Page3

Key Features

Capability of recording at 30 FPS (15 FPS for L Series models)

Supports various encoding formats (H.264 and MJPEG)

Multiple Streaming technology, supporting multiple concurrent streams (3 streams for L series and Ultra

Series models, and 4 streams for Pro Series Models)

Sense Up+ provides enhanced videos even in low light conditions

Day/night video quality scheduling

Audio and motion detection for notification via email or FTP

Supports 3D DNR, WDR, BLC, adjustable shutter speed, and privacy masking

Two-way audio (select models only)

Bit rate and frame rate on-the-fly adjustment

Supports Android, iPad, and iPhone mobile live monitoring

Supports dynamic DNS (DDNS) and network time protocol (NTP)

Supports PCM/G.711

Supports ONVIF protocol

Supports LILIN Navigator

Trademark Acknowledgments

Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, ActiveX, and Internet Explorer

are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,

Inc. in the United States and other countries. Flash, Macromedia, and Macromedia Flash Player are either

trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other

countries.

Linux and DynDNS are registered trademarks of the respective holders.

Intel, Pentium, and Intel® Core™ 2 Duo are registered trademarks of Intel Corporation.

FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used

under license there from.

Other names of companies and their products mentioned in this manual may be trademarks or registered

trademarks of their respective owners.

Other References

LILIN IP Camera Start Guide Page4

Mobile devices

For mobile surveillance, refer to the detail page of LILINViewer on Apple App Store or Google Play.

LILIN Universal ActiveX Control

Sample codes and documents are included in the product CD and can be downloaded from our company

website.

LILIN HTTP API

For non-ONVIF integration, see the LILIN HTTP API document. HTTP API is used in all LILIN IP cameras.

Caution

Do not drop or damage the equipment

Do not install the equipment near fire or heat sources

Keep the equipment from rain, moisture, smoke, or dust

Do not cover the opening of the cabinet with cloth and/or plastic or install the unit in poorly ventilated

places. Allow 10cm between this unit and its surroundings

Do not continue to operate the unit under abnormal conditions such as smoke, odor, or loss of signal

whilst power is turned on

Do not touch the power cord with wet hands

Do not damage the power cord or leave it under pressure

To avoid unnecessary magnetic interference, do not operate this unit near magnets, speaker systems,

etc.

All connection cables should be grounded properly

LILIN IP Camera Start Guide Page5

Chapter 1 System Overview

Chapter 1-1 System Requirements

LILIN’s IP cameras adopt compression technology that provide high compression rate and superior video

quality. However, video performance depends highly on CPU power and network bandwidth for video

streaming. The following sections specify the system requirements for using LILIN IP cameras.

Chapter 1-2 Software Requirements

Merit LILIN Universal ActiveX software components or QuickTime are required for a web browser to display

MJPEG or H.264 video. When you first log in to our IP camera, you may see a prompt box as below:

Click Install and follow the onscreen instructions to install necessary components.

LILIN IP Camera Start Guide Page6

Chapter 2 Before Accessing IP Cameras

Before accessing the IP cameras, make sure that the camera’s RJ-45 network connector, audio cable, and

power cable are properly connected. To set the IP address, consult your network administrator. The default IP

address for each IP camera is 192.168.0.200. Users can use the default IP address to verify the camera’s

network connection.

Chapter 2-1 Configure IP Addresses using the IPScan Utility

To configure the IP address of your cameras, download IPScan from our official website:

http://www.meritlilin.com/webe/html/download. Or, you can execute the IPScan installer from the installation CD

directly. To change the IP address, subnet mask, gateway, or HTTP port of your cameras, follow the steps

below:

Run the IPScan utility

Click Refresh. All available devices will be listed on the screen

Select the device item from the device list

To edit or modify IP address, subnet mask, gateway, or HTTP port, use the box

Click Apply for the changes to take effect

Click Refresh again to verify the changed settings

Chapter 2-2 Configure IP Addresses through HTML Connection

To change an IP address on a webpage, type the default IP address (192.168.0.200) into the browser address

bar and follow the steps below:

Log in to your LILIN IP camera using the default username admin and default password pass

Click Setup→Network to edit or modify IP address, subnet mask, gateway, or HTTP port

Click Submit for the changes to take effect.

LILIN IP Camera Start Guide Page7

Chapter 2-3 Web Browser Settings & Software Components Required

Make sure your Internet browser allows signed ActiveX plug-in to run on your PC. Set Download Signed

ActiveX plug-in controls to Prompt and enable Run ActiveX control and plug-in. You can set this in Internet

Explorer→Tools→Internet Options→Security→Custom Settings.

Once completed, you can access the IP camera’s live video by entering the default IP address into your web

browser. A security warning dialog box will appear. Click OK to download the ActiveX directly from the IP

camera.

Chapter 2-4 Login

You can log in to the camera as administrator or guest.

The default usernames and passwords for

administrator are:

Administrator

Username

admin

Password

pass

Then press Submit to log in.

LILIN IP Camera Start Guide Page8

Chapter 3 LILIN IP Camera Operations

When logged in as an administrator, two main features are available: 1) camera operations and 2)

configurations.

Chapter 3-1 IP Camera Operations

1. Profile switching menu—Switching from one profile to another

2. ActiveX display screen—Display RTSP H.264 or MJPEG network video

3. Quick buttons—IP camera control panel

4. Setup menu—IP camera setup menu

The ActiveX control provides an ePTZ (electronic Pan, Tilt, and Zoom) feature. To perform an ePTZ operation,

hold and drag your mouse across the screen.

LILIN IP Camera Start Guide Page9

Move your cursor to the PIP window and drag inside it to perform ePan and eTilt actions. The scroll wheel can

be used to zoom in and zoom out.

Right-click to exit the ePTZ mode.

Chapter 3-2 IP Camera Main Controls

(fisheye models)

(autofocus models)

The quick control panel buttons are described below:

Take a snapshot of the video

Start recording

Pause recording

LILIN IP Camera Start Guide Page10

Chapter 3-2-1 Two-way Audio (only available for audio-ready cameras)

For models supporting two-way audio, click the microphone icon to speak to a remote site. Click the icon

again to turn the microphone off.

Speaker on/off (for audio models only)

Microphone on/off (for audio model only)

Alarm output on/off (for alarm model only)

Switch to another screen if you are using multiple displays

Click to display the current (left) and ideal (right) sharpness

value to help you use the focal ring to focus

Switch to view No. 1 (fisheye models only)

Switch to a combination of views No. 1, 2, 3, and 360°

(fisheye models only)

Switch to a combination of views No. 1, 2, 3, and 4 (fisheye

models only)

Switch to a combination of views No. 1, 2, 3, and wide angle

(fisheye models only)

Switch to a combination of views No. 1, 2, 3, and wide angle

(fisheye models only)

Click to autofocus the subject (autofocus models only)

Click to scan through all focal planes (autofocus models

only)

Note: Depending on the camera models you have, you may see different quick buttons available.

Inhaltsverzeichnis

Andere Lilin IP-Kamera Handbücher

Lilin

Lilin AHD701A3.6 Bedienungsanleitung

Lilin

Lilin IPG1022ESX3 Bedienungsanleitung

Lilin

Lilin H.264 Bedienungsanleitung

Lilin

Lilin UFG1122 Leitfaden

Lilin

Lilin AHD612AX4.2 Bedienungsanleitung

Lilin

Lilin IPR732ES Bedienungsanleitung

Lilin

Lilin IPS4184E Bedienungsanleitung

Lilin

Lilin IPS2102E Bedienungsanleitung

Lilin

Lilin PIH - 7000 IP Series Bedienungsanleitung

Lilin

Lilin IPR712S Bedienungsanleitung

Lilin

Lilin IPG1022ELS Bedienungsanleitung

Lilin

Lilin AHD DOME Bedienungsanleitung

Lilin

Lilin UHG1182E Bedienungsanleitung

Lilin

Lilin IPR414/418ESX3 Bedienungsanleitung

Lilin

Lilin iMEGAPRO IPD/R2322ES Bedienungsanleitung

Lilin

Lilin D/N HD AF IR IP CAMERA Bedienungsanleitung

Lilin

Lilin ipg1022esx Bedienungsanleitung

Lilin

Lilin iMEGAPRO IPR722ES Bedienungsanleitung

Lilin

Lilin IPR614ES4.3 Bedienungsanleitung

Lilin

Lilin iMEGAPRO IPD2122ES Bedienungsanleitung

Lilin

Lilin IPS622M Bedienungsanleitung

Lilin

Lilin ZG1232E Bedienungsanleitung

Lilin

Lilin IPG012ES Bedienungsanleitung

Lilin

Lilin iMEGALITE series Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung