Lilin UFG1122 Leitfaden
4K Ultra HD IP Camera
Start Guide
Ultra Series IP Camera Start Guide Page2
Summary
LILIN 4K Ultra HD IP cameras are one of our Ultra family that use the latest compression technologies, which
allow Triple Streaming of H.264 and JPEG in different resolutions. LILIN’s Triple Streaming technology
transmits digital video at various bit rates and frame rates to suit both high and low bandwidth network
environments.
The Ultra series cameras are equipped with progressive-scan, megapixel CMOS sensors that provide superior
video quality. LILIN’s digital signal processing (DSP) technologies support Wide Dynamic Range (WDR), 3D
noise reduction, Backlight Compensation (BLC), adjustable shutter speed, and privacy masking features.
The built-in intelligent video analytics engine enables audio and motion detection. Other useful features include
two-way audio, SD card recording, mobile device live access, email notification with JPEG snapshots, and
JPEG-to-FTP upload.
The Ultra series cameras, with their latest technologies, provide megapixel H.264 video, outstanding DSP
capacities, built-in video analytics, and built-in PoE support. All cameras in the Ultra family are ONVIF
compliant.
The powerful combination of LILIN Navigator software and IP cameras will maximize your system performance
and deliver an integrated system solution for your migration to IP videos.
Ultra Series IP Camera Start Guide Page3
Key Features
Capability of recording at 15 FPS
Supports dual encoding formats (H.264 and JPEG)
Triple Streaming technology, 3 concurrent streams available
Sense Up+ provides enhanced videos even in low light conditions
Day/night video quality scheduling
Audio and motion detection for notification via email or FTP
Supports 3D DNR, WDR, BLC, adjustable shutter speed, and privacy masking
Two-way audio (select models only)
Bit rate and frame rate on-the-fly adjustment
Supports Android, iPad, and iPhone mobile live monitoring
Supports dynamic DNS (DDNS) and network time protocol (NTP)
Supports PCM/G.711
Supports ONVIF protocol
Supports LILIN Navigator
Trademark Acknowledgments
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, ActiveX, and Internet Explorer
are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries. Flash, Macromedia, and Macromedia Flash Player are either
trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or other
countries.
Linux and DynDNS are registered trademarks of the respective holders.
Intel, Pentium, and Intel® Core™ 2 Duo are registered trademarks of Intel Corporation.
FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used
under license there from.
Other names of companies and their products mentioned in this manual may be trademarks or registered
trademarks of their respective owners.
Other References
Ultra Series IP Camera Start Guide Page4
Mobile devices
For mobile surveillance, refer to the detail page of LILINViewer on Apple App Store or Google Play.
LILIN Universal ActiveX Control
Sample codes and documents are included in the product CD and can be downloaded from our company
website.
LILIN HTTP API
For non-ONVIF integration, see the LILIN HTTP API document. HTTP API is used in all LILIN IP cameras.
Caution
Do not drop or damage the equipment
Do not install the equipment near fire or heat sources
Keep the equipment from rain, moisture, smoke, or dust
Do not cover the opening of the cabinet with cloth and/or plastic or install the unit in poorly ventilated
places. Allow 10cm between this unit and its surroundings
Do not continue to operate the unit under abnormal conditions such as smoke, odor, or loss of signal
whilst power is turned on
Do not touch the power cord with wet hands
Do not damage the power cord or leave it under pressure
To avoid unnecessary magnetic interference, do not operate this unit near magnets, speaker systems,
etc.
All connection cables should be grounded properly
Ultra Series IP Camera Start Guide Page5
Chapter 1 System Overview
Chapter 1-1 System Requirements
LILIN’s 4K Ultra HD H.264 video compression technology provides high compression rate and superior video
quality. However, video performance highly depends on CPU power and network bandwidth for video
streaming. The following sections specify the system requirements for using a 4K Ultra HD H.264 IP camera.
Chapter 1-2 Software Requirements
Merit LILIN Universal ActiveX software components or QuickTime are required for a web browser to display
JPEG or H.264 4K Ultra HD video. When you first log in to our IP camera, you may see a prompt box:
Click Install and follow the onscreen instructions to install necessary components.
Ultra Series IP Camera Start Guide Page6
Chapter 2 Before Accessing IP Cameras
Before accessing the IP cameras, make sure that the camera’s RJ-45 network connector, audio cable, and
power cable are properly connected. To set the IP address, consult your network administrator. The default IP
address for each IP camera is 192.168.0.200. Users can use the default IP address to verify the camera’s
network connection.
Chapter 2-1 Configuring IP Addresses using the IPScan Utility
To configure the IP address of your cameras, download IPScan from our official website:
http://www.meritlilin.com/webe/html/download. Or, you can execute the IPScan installer from the installation CD
directly. To change the IP address, subnet mask, gateway, or HTTP port of your cameras, follow the steps
below:
Run the IPScan utility
Click Refresh. All available devices will be listed on the screen
Select the device item from the device list
To edit or modify IP address, subnet mask, gateway, or HTTP port, use the box
Click Apply for the changes to take effect
Click Refresh again to verify the changed settings
Chapter 2-2 Configuring IP Addresses through HTML Connection
To change an IP address on a webpage, type the default IP address (192.168.0.200) into the browser address
bar and follow the steps below:
Log in to the H.264 4K Ultra HD IP camera using the default username admin and default password
pass
Click Setup→Network to edit or modify IP address, subnet mask, gateway, or HTTP port
Click Submit for the changes to take effect.
Ultra Series IP Camera Start Guide Page7
Chapter 2-3 Web Browser Settings & Software Components Required
Make sure your Internet browser allows signed ActiveX plug-in to run on your PC. Set Download Signed
ActiveX plug-in controls to Prompt and enable Run ActiveX control and plug-in. You can set this in Internet
Explorer→Tools→Internet Options→Security→Custom Settings.
Once completed, you can access the IP camera’s live video by entering the default IP address into your web
browser. A security warning dialog box will appear. Click OK to download the ActiveX directly from the IP
camera.
Chapter 2-4 Login
You can log in to the camera as administrator or guest.
Default usernames and passwords are:
Administrator
Viewer
Username
admin
guest
Password
pass
guest
Then press Submit to log in.
Ultra Series IP Camera Start Guide Page8
Chapter 3 H.264 4K Ultra HD IP camera network features
When logged in as an administrator, two main features are available: 1) camera operations and 2)
configurations.
Chapter 3-1 IP Camera Operations
1. Profile switching menu—Switching from one profile to another
2. ActiveX display screen—Display RTSP H.264 or JPEG network video
3. Quick control panel—IP camera control panel
4. Setup menu—IP camera setup menu
The ActiveX control provides an ePTZ (electronic Pan, Tilt, and Zoom) feature. To perform an ePTZ operation,
hold and drag your mouse across the screen.
2
4
3
1
Ultra Series IP Camera Start Guide Page9
Move your cursor to the PIP window and drag inside it to perform ePan and eTilt actions. The scroll wheel can
be used to zoom in and zoom out.
Right-click to exit the ePTZ mode.
Chapter 3-2 IP Camera Main Controls
The quick control panel buttons are described below:
Chapter 3-2-1 Two-way Audio
For models supporting two-way audio, click the microphone icon to speak to a remote site. Click the icon
again to turn the microphone off.
Snapshot: Take a snapshot of the video
Recording: Start recording
Speaker on/off (for audio models only)
Microphone on/off (for audio model only)
Alarm output on/off (for alarm model only)
Ultra Series IP Camera Start Guide Page10
Click the speaker icon to monitor the audio of a remote site. Click the icon again to turn the speaker off.
Chapter 3-2-2 Record to a Local PC
To record to a local PC, right-click anywhere on the screen. Choose Setting to specify the recording paths and
recording sizes, and choose Recording On to start recording.
Note: Only audio-ready IP camera models support this feature.
Inhaltsverzeichnis
Andere Lilin IP-Kamera Handbücher
Lilin
Lilin PZD6422CSE-2 Bedienungsanleitung
Lilin
Lilin IPD6220ES3.6 Bedienungsanleitung
Lilin
Lilin IPS622M Bedienungsanleitung
Lilin
Lilin ZG1232E Bedienungsanleitung
Lilin
Lilin IPR7424 Bedienungsanleitung
Lilin
Lilin PIH-0364X WN IP Bedienungsanleitung
Lilin
Lilin MR3022 Bedienungsanleitung
Lilin
Lilin PIH-0364X WN IP Bedienungsanleitung
Lilin
Lilin IPS7224M Bedienungsanleitung
Lilin
Lilin IPR712S Bedienungsanleitung
Lilin
Lilin ipg1022esx Bedienungsanleitung
Lilin
Lilin L Series Leitfaden
Lilin
Lilin IPS2102E Bedienungsanleitung
Lilin
Lilin AHD612AX4.2 Bedienungsanleitung
Lilin
Lilin IPR732ES Bedienungsanleitung
Lilin
Lilin AHD7324AX10 Bedienungsanleitung
Lilin
Lilin CMR7484X2.2N/P Bedienungsanleitung
Lilin
Lilin FD2452E Bedienungsanleitung
Lilin
Lilin iMEGALITE series Bedienungsanleitung
Lilin
Lilin PZD6422X3 Bedienungsanleitung
