Linksys LKG0F755E Bedienungsanleitung

Getting the most from your

Maxtor OneTouchTM USB hard drive

and Linksys Network Storage Link

Share your OneTouch drive with everyone on your network.

With the Linksys Network Storage Link, you can now use your Maxtor

OneTouch USB hard drive as a network hard drive.

This document shows you how to install everything and get up and

running as quickly as possible.

What are the benefits of a network drive?

Share information

Keep your files, photos or MP3s in one central location. Every PC or selected users on your

network can access the information.

Save money

No need to keep a PC or server turned on all the time for files to be available–your network hard

drive is always accessible.

Protect your valuable data

With the included Retrospect®Express®backup software, you can schedule automated backups

to your network hard drive.

Before you install – please read!

Not Hot-Swappable – Make sure that the Network Storage Link is turned OFF before you

connect or disconnect your Maxtor OneTouch Drive!

Drive Format – When using the OneTouch drive as a network drive, it must be connected

to the Network Storage Link ONLY, as it is formatted using a non-Windows file system.

The OneTouch drive may NOT be connected directly to a Windows system without

reformatting. Warning: Reformatting will erase all of your data.

OneTouch Button – The OneTouch button currently does not work with the Network

Storage Link. You may use the included Retrospect Express backup software, however,

for automated backup of your files on one computer. (See page 6 for more information.)

USB Only – The Network Storage Link is not compatible with FireWire. You may ONLY

use a USB-compatible OneTouch drive.

Windows Only – The Network Storage Link currently supports Windows 98SE, ME, 2000,

and XP only.

Installing the Network Storage Link and OneTouch Drive

Connecting the Network Storage Link to Your Network

1. Connect one end of an Ethernet cable to

the Ethernet port on the back of the

Network Storage Link.

2. Connect the other end of the Ethernet

cable to your router.

Figure 1. Connecting the Ethernet cable

Connecting the OneTouch Drive to the Network Storage Link

Important – Make sure that the Network Storage Link is turned OFF before you connect

or disconnect your Maxtor OneTouch drive!

3. Connect one end of the included USB

cable to your OneTouch drive.

4. Connect the other end of the USB

cable to the Disk 1 port on the Network

Storage Link.

Note: You can only connect up to two

drives. Do NOT connect additional drives

using a USB hub.

Figure 2. Connecting the USB cable

Powering Up the OneTouch Drive

5. Connect the round female connector from

the power adaptor to the drive’s power

connector

6. Connect the two-pin female connector on

the power cord to the power adaptor.

Figure 3. Connecting the power

7. Connect the standard 3-pin electrical plug to an AC power outlet (preferably a

surge-protected outlet).

8. Turn on the OneTouch drive using the switch on its back panel.

Powering Up the Network Storage Link

9. Connect one end of the power adaptor to the back of the Network Storage Link.

10. Connect the other end of the power adaptor to an AC power outlet (preferably a

surge-protected outlet).

11. Turn on the Network Storage Link by pressing its front panel button.

The Network Storage Link may take up to three minutes to completely power up.

During this time, the Ready/Status light will flash. When the Ready/Status light stops flashing

and remains solid green, the Network Storage Link is ready for use.

Note: For more information about the lights on the Network Storage Link, see Chapter 3:

“Connecting the Storage Link,” in the Linksys User Guide.

Installing the Linksys Software

12. Insert the Setup Wizard CD into your computer.

The Linksys Main Menu screen should appear after a few seconds.

Note: If the main menu does not appear, see Chapter 4: “Setting Up the Storage Link,” in the

Linksys User Guide.

13. Click Setup.

The Linksys software will search for the Network Storage Link connected to your network.

When your Network Storage Link is found, the message: “Network Storage Link(s) Have Been

Found!” will appear at the top of the screen and an icon and the name of your Storage Link will

appear in the Selection Column.

On the right side of the screen, you will see the IP Address of your Network Storage Link.

14. Write down this IP Address. You will need it later to use your networked OneTouch drive.

Note: If your Network Storage Link is not found, try clicking Search Again. If it is still not found,

see Appendix A: “Troubleshooting” in the Linksys User Guide.

Once your Storage Link is found, the next step is to format your OneTouch drive.

Keep the Linksys setup screen open and proceed to the next section.

Formatting the OneTouch Drive

15. On the left side of the Linksys setup

screen, double-click the icon for your Network

Storage Link.

Figure 4. Network Storage Link Icon

A web browser will open and the Home page for your Network Storage Link will appear.

Note: If your web browser does not automatically open, follow the steps in Chapter 6:

”Configuring the Storage Link,” in the Linksys User Guide.

Note: If you receive a “page cannot be displayed” message, you may need to change the IP

address (URL) of your Network Storage Link. See Chapter 4: “Setting Up the Storage Link,” in

the Linksys User Guide, for information about changing the Network Storage Link’s settings. If

you change the IP address of your Network Storage Link, be sure to write down the new number,

as you will need it to use your networked OneTouch drive after formatting.

16. Click Administration.

A window will open, asking you to enter your user name and password.

17. Enter admin for both user name and password and click OK.

The LAN page will appear.

18. Click Advanced.

The Groups page will appear.

19. Click Disk.

The Disk page will appear.

20. Click Format Disk 1.

Note: If your drive is connected to the Disk 2 port on the Network Storage Link, click

Format Disk 2.

The formatting process may take 15 to 30 minutes, depending on the size of your

OneTouch Drive.

Once it is finished, the message: “Formatted” will appear.

21. Close your web browser and click No at the bottom of the Linksys Setup Screen.

Note: For more information about the Linksys Web Utility, see Chapter 6: “Configuring the

Storage Link,” in the Linksys User Guide.

Using Your Networked OneTouch Drive

To use your networked OneTouch Drive, follow these steps:

1. On the desktop, right-click the icon for your

computer and choose Map Network Drive.

Figure 5. Mapping a Network Drive

The Map Network Drive window

will appear.

2. In the Folder (or Path) box enter the

IP address of your Network Storage

Link, followed by Disk 1 using this

format: \\IP address\Disk 1.

For example: \\192.168.1.77\Disk 1

Note: Make sure there is a space

between “Disk” and “1” in the IP address.

Note: If you changed the IP address in

the “Formatting the OneTouch Drive”

section on page 3, be sure to enter that

address here.

Figure 6. Entering IP Address of Network Storage Link

Note: Reconnect at logon is automatically selected. This means that every time you logon in the

future, you will automatically be connected to your OneTouch drive. You will find it alongside your

computer’s main disks (C and D, for example) in the My Computer window.

3. Click Finish.

Windows will search the available networks for your Network Storage Link and a window will

open displaying the contents of the Disk 1 directory on your OneTouch drive.

Note: Two directories are automatically created for you on your OneTouch Drive. The Admin 1

directory is set up for only the administrator to use and will require a User ID and Password to be

entered by any user accessing it from a computer other than the administrator’s. The Disk 1

directory, however, does not require a User ID or Password. You may create password-protected

directories for additional users. See Chapter 6: “Configuring the Storage Link” in the Linksys

User Guide for more information.

Your OneTouch drive is now ready for use as a networked drive. You may drag and drop files to

it, just like a normal hard drive.

Network Backup Software

Your OneTouch drive includes Retrospect Express backup software, for easy, automated backup

of your important files. If you would like to backup files from a computer on your network, follow

the steps outlined in the next section.

Note: You may only install the Retrospect Express software on one computer. However, you

may purchase additional copies of Retrospect by going to: http://www.dantz.com.

Retrospect Software Installation:

1. Go to Chapter 2: ‘Installing Your Drive’ in the Maxtor OneTouch User’s Guide.

2. Find the Installing the Software section for your operating system.

Your options are: Windows 2000 and XP or Windows 98SE and ME

3. Follow the installation steps, choosing the Full Installation option.

Note: When you have completed the software installation, do not proceed to the “Connecting the

Drive” or “Setting up the Maxtor OneTouch Feature” sections.

For step-by-step directions on how to back up your entire computer system using Retrospect, see

the following section.

Automated Network Backup Using Retrospect

1. Open Retrospect.

2. On the left side of the screen, click the +sign

next to Automate and then click EasyScript.

The EasyScript welcome window

will appear.

3. Click Next.

The next window will ask you to choose your

backup media.

4. Select Disks and click Next.

Figure 7. EasyScript

The next window will ask you how many backup sets you want.

5. Select I want one Backup Set for everything and click Next.

The next window will ask you how often you would like to back up.

6. Choose either Once a week or Every weekday and click Next.

If you chose Once a week, you will choose the day and the start time.

If you chose Every weekday, you will choose only the start time.

7. Make your choice(s) and click Next.

The Backup Summary window will appear showing the backup options you have chosen. The

Start the first backup now checkbox is checked, which means your first backup will start when

you click Finish.

Note: It is recommended that you start your first backup now, because you will choose the source

and destination of your backup, the first time you do it. If you choose not to start your first backup

now, you will need to be at your computer for the first scheduled backup to choose the source

and destination of your backup.

8. Click Finish.

If you chose the “Start the first backup now” option, Retrospect will scan your drive and the

Backup Set window will appear. You will now choose the disk where your backup files will

be stored.

9. Double-click My Network Places.

The Adding Network Volume window will appear.

10. Click Advanced.

A window will open, asking you to enter the UNC path for the volume.

11. Enter the IP address of your Network Storage Link, followed by Disk 1 using

this format: \\IP address\Disk 1. For example: \\192.168.1.77\Disk 1

Note: If you changed the IP address in the “Formatting Your Drive” section on page 3, be sure to

enter that address here.

12. Click OK.

Disk 1 will now appear under My Network Places in the Backup Set window.

13. Select Disk 1 and click Proceed.

The Add New Member window will appear to confirm your backup destination.

14. Click OK.

The backup will now start.

Note: Your entire computer system (including all of its drives) will automatically be backed up.

Depending on the size of your system and the speed of your network, this process may take as

much as several hours. For example, on a home wireless network of less than 10 megabits per

second, a 10 gigabyte backup would take over three hours.

If you wish to change the specific items that are backed up or learn how to restore files from a

backup, see the Retrospect online help in the Retrospect Express software.

When the backup is finished, you will see the message: “Execution completed successfully.”

Congratulations. You have completed your first backup. Future backups will take place

automatically on the days and times that you selected, as long as the computer, OneTouch drive

and Network Storage Link are turned on.

Inhaltsverzeichnis

Andere Linksys Netzwerk-Hardware Handbücher

Linksys

Linksys EFG80 - EtherFast Instant GigaDrive NAS... Bedienungsanleitung

Linksys

Linksys EFG120 - EtherFast Network Attached Storage NAS... Original Betriebsanleitung

Linksys

Linksys SVR3000 - One Services Router Bedienungsanleitung

Linksys

Linksys EFG20 Bedienungsanleitung

Linksys

Linksys OGV200 - Network Optimizer For Gaming Bedienungsanleitung

Linksys

Linksys MX4300 Bedienungsanleitung

Linksys

Linksys EFG120 - EtherFast Network Attached Storage NAS... Original Betriebsanleitung

Linksys

Linksys WMB54G - Wireless-G Music Bridge Network Audio... Bedienungsanleitung

Linksys

Linksys EFG120 - EtherFast Network Attached Storage NAS... Bedienungsanleitung

Linksys

Linksys WMB54G - Wireless-G Music Bridge Network Audio... Bedienungsanleitung

Linksys

Linksys WET54G - Wireless-G EN Bridge Original Betriebsanleitung

Linksys

Linksys EFG120 - EtherFast Network Attached Storage NAS... Bedienungsanleitung

Linksys

Linksys BEFN2PE Original Betriebsanleitung

Linksys

Linksys EFPC2SC Bedienungsanleitung

Linksys

Linksys VELOP MX5500 Series Bedienungsanleitung

Linksys

Linksys BEFN2PE Bedienungsanleitung

Linksys

Linksys VELOP AX5300 Bedienungsanleitung

Linksys

Linksys HPES03 Bedienungsanleitung

Linksys

Linksys EF31SC Bedienungsanleitung

Linksys

Linksys EFG40 Bedienungsanleitung

Linksys

Linksys WMB54G - Wireless-G Music Bridge Network Audio... Bedienungsanleitung

Linksys

Linksys WBP54G Original Betriebsanleitung

Linksys

Linksys WET54G V3 Original Betriebsanleitung

Linksys

Linksys EFG80 - EtherFast Instant GigaDrive NAS... Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung