LMI Technologies HDI Advance Bedienungsanleitung
Quick Start Guide
15229-1.0_MANUAL_Quickstart-HDI-Advance.pdf
Getting Started with the HDI Advance 3D Scanner
This quick start guide provides you with the resources to get you started on 3D scanning.
The HDI Advance 3D Scanner comes with:
• 3D scanning software, FlexScan3D
• Physical capturing unit for capturing 3D data (some assembly is required)
Downloading FlexScan3D Software
The HDI Advance 3D Scanner is powered by FlexScan3D. You can download the software from the
Download Center (downloads.lmi3d.com). To create a download account, please send your contact
name, email address, company name, and scanner model to orders@lmi3D.com.
Instructions for installing and activating FlexScan3D using installation ID or dongle can be found in
the User Manual under “Getting Started”: http://manual.lmi3d.com.
Assembling the Capturing Unit
Instructions for assembly can be found in this Quick Start Guide.
Customer Support
If you have any installation issues, please contact:
AMERICAS
LMI Technologies (Head Oce)
Vancouver, Canada
+1 604 636 1011
EMEAR
LMI Technologies GmbH
Berlin, Germany
+49 (0)3328 9360 0
ASIA PACIFIC
LMI (Shanghai) Trading Co., Ltd.
Shanghai, China
+86 21 5441 0711
LMI Technologies has sales oces and distributors worldwide. All contact information is listed at
lmi3D.com/contact/locations.
Hardware Included with Your HDI Advance Scanner
When you receive your HDI Advance 3D Scanner, check that all components are included:
Number Item
1 Mount, Projector, and Remote (not shown)
2 2 x USB 3.0 Cameras
3 2 x Lenses (12mm)
4 Tripod Legs
5 Tripod Head
6 15mm Calibration Board
7 1 sheet of Photogrammetry Dots
8 FlexScan3D Dongle
9 Power cable, HDMI cable, USB 3.0 cable (3m)
2
7
3
9
5
6
4
1
8
Tripod Setup
Open the tripod legs and place them firmly on the ground.
Attach the tripod head to the legs by firmly twisting the tripod head until it is hand tight.
Connect the Scanner to the Tripod
Depress the grey lock on the tripod head lever, and push the lever away from you until it clicks.
Carefully lift up the pre-assembled scanner and find the mount adapter. Gently place the scanner
onto the tripod head. Tilt the scanner to snap it into place on the tripod head.
Attach the Lenses to the Cameras
Carefully remove the lenses from the packaging and take o the camera lens cap from each
camera. The lenses will need to be screwed onto the cameras until they are hand tight.
Connect the HDMI and Power Cables to the Projector
Attach the HDMI and power cables to the back of the projector.
The physical assembly of the HDI Advance 3D Scanner is now complete.
Connect the USB 3.0 cables and the HDMI cable to your computer. Plug the power cable into an
electrical outlet.
For information on performing scans, see the FlexScan3D user manual.
Use the Scanner
Remove the projector lens cap.
Copyright © 2015 LMI Technologies Inc. All rights reserved.
Inhaltsverzeichnis
Andere LMI Technologies Scanner Handbücher
LMI Technologies
LMI Technologies chroma+scan 24 0 Series Bedienungsanleitung
LMI Technologies
LMI Technologies Gocator 1300 Bedienungsanleitung
LMI Technologies
LMI Technologies FocalSpec Bedienungsanleitung
LMI Technologies
LMI Technologies MikroCAD premium Bedienungsanleitung
LMI Technologies
LMI Technologies MikroCAD premium Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 120 Bedienungsanleitung
LMI Technologies
LMI Technologies chroma+scan 20 0 Series Bedienungsanleitung
LMI Technologies
LMI Technologies MikroCAD Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 120 Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 100 Series Bedienungsanleitung
