LMI Technologies MikroCAD Bedienungsanleitung
Quick Start Guide
15215-01.05_MANUAL_Quickstart_MikroCAD_premium1.6x1.2_revB
MikroCAD
premium 1.6 x 1.2
2
Getting Started with the MikroCAD Scanner
Congratulations on purchasing a MikroCAD 3D Scanner. This quick start guide provides you with
the resources to get you started on 3D scanning.
Downloading the Software
You can download the MikroCAD installer at http://lmi3d.com/support/downloads/mikrocad.
If you purchased the MikroCAD software (Standard or Professional), download 14471-x.x.x.x_
SOFTWARE_MikroCAD_Standard_Professional.exe.
If you purchased only the scanner, download 14470-x.x.x.x_SOFTWARE_MikroCAD_Scan.
exe.
Customer Support
If you have any installation issues, please contact:
AMERICAS
LMI Technologies (Head Oce)
Vancouver, Canada
+1 604 636 1011
EMEAR
LMI Technologies GmbH
Berlin, Germany
+49 (0)3328 9360 0
ASIA PACIFIC
LMI (Shanghai) Trading Co., Ltd.
Shanghai, China
+86 21 5441 0711
LMI Technologies has sales oces and distributors worldwide. All contact information is listed at
lmi3D.com/contact/locations.
3
Hardware Included with Your MikroCAD Scanner
Number Description
1 3D Scanner and stand
2 Two Ethernet cables (one long, one short)
3MikroCAD software dongle (separate purchase; required for using measurement
tools)
4 Power over Ethernet injector and power cord
5 Calibration kit
When you receive your MikroCAD scanner, check that all components are included:
5
5
You may change the default values if you wish, but we recommend leaving .NET Runtime
4.0 selected to ensure that it is installed.
6
3. Click Install.
The installer installs the MikroCAD software.
4. Restart the computer if you are instructed to do so.
7
Connecting the Scanner Cables
1. Using the short Ethernet cable, connect the Data/IN port on the Power over Ethernet
injector to an Ethernet port on the computer (sold separately).
2. Using the long Ethernet cable, connect the P+D/OUT port on the Power over Ethernet
injector to the scanner’s Ethernet port.
8
Using the Scanner
1. Connect the power cord to the Power over Ethernet injector, and plug the other end of the
power cord into a wall outlet to power up the scanner.
The LED on the top of the scanner starts flashing after roughly 30 seconds, turns o for
roughly 30 seconds, and then turns on again and remains on. The scanner is ready when the
LED remains on.
2. Turn the computer is on.
3. If you are going to perform measurements, insert the dongle into a free USB port.
The dongle is required to perform measurements, but not to acquire data.
Windows may install a driver when you insert the dongle.
4. Launch the MikroCAD software.
If the scanner is not listed in the scanner selection dialog, or if the scanner repeatedly tries
to connect to the scanner, see “Troubleshooting” on page 12.
9
5. Put the sample below the scanner in the center of the camera image.
Looking into the light projector for more than one minute presents a risk to
vision. Avoid looking into the light projector or limit exposure to less than
one minute.
6. Configure the brightness using the slider in the MikroCAD software.
Use the Intensity Profile graph in the software to guide you. Try to set the brightness so
that most of the peaks are below 256 and near the middle of the graph.
If you see no image, see “Troubleshooting” on page 12.
10
7. Focus the scanner.
To focus the scanner, align the vertical line of the projected cross pattern with the vertical
line of the red cross in the MikroCAD software.
Use the small knob on the column stand to fine-tune the focus. Use the large knob on the
column stand to move the scanner more quickly.
For coarse
adjustment
For fine
adjustment
8. On the Scan page, in the Acquisition group, click on Scan to perform a scan.
Andere Handbücher für MikroCAD
1
Inhaltsverzeichnis
Andere LMI Technologies Scanner Handbücher
LMI Technologies
LMI Technologies FocalSpec Bedienungsanleitung
LMI Technologies
LMI Technologies chroma+scan 24 0 Series Bedienungsanleitung
LMI Technologies
LMI Technologies HDI Advance Bedienungsanleitung
LMI Technologies
LMI Technologies Gocator 1300 Bedienungsanleitung
LMI Technologies
LMI Technologies Gocator 2075 Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 109 Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 100 Series Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 120 Bedienungsanleitung
LMI Technologies
LMI Technologies chroma+scan 20 0 Series Bedienungsanleitung
LMI Technologies
LMI Technologies HDI 100 Series Bedienungsanleitung
