Lorex VANTAGE LH110 ECO SERIES Bedienungsanleitung

Andere Handbücher für VANTAGE LH110 ECO SERIES

6

Inhaltsverzeichnis

Andere Lorex DVR Handbücher

Lorex

Lorex EDGE LH310 SERIES Bedienungsanleitung

Lorex

Lorex Vantage LH010 ECO BLACKBOX SERIES Bedienungsanleitung

Lorex

Lorex SG19 Series Betriebsanleitung

Lorex

Lorex DV900 Series Bedienungsanleitung

Lorex

Lorex L20WD800 Series Bedienungsanleitung

Lorex

Lorex L114V251 Bedienungsanleitung

Lorex

Lorex LH600 SERIES Bedienungsanleitung

Lorex

Lorex D871B Series Bedienungsanleitung

Lorex

Lorex LNR400 SERIES Bedienungsanleitung

Lorex

Lorex DV700 Series Bedienerhandbuch

Lorex

Lorex AUSC-1B Series Bedienungsanleitung

Lorex

Lorex DXR1080-A Installationsanleitung

Lorex

Lorex LH050 ECO SERIES Bedienungsanleitung

Lorex

Lorex LH120 Series Bedienungsanleitung

Lorex

Lorex N841 Series Bedienungsanleitung

Lorex

Lorex LH150 ECO4 SERIES Bedienungsanleitung

Lorex

Lorex LH314 Bedienungsanleitung

Lorex

Lorex L224 Series Bedienungsanleitung

Lorex

Lorex D231A41B Bedienungsanleitung

Lorex

Lorex L404 Bedienungsanleitung

Lorex

Lorex L154-81 Bedienungsanleitung

Lorex

Lorex LHD200 Bedienungsanleitung

Lorex

Lorex Edge LH300 Series Bedienungsanleitung

Lorex

Lorex QLR1660 Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

DIGIFUSION

DIGIFUSION FVRT150 Bedienungsanleitung

1

www.lorextechnology.com

Copyright ©2011 Lorex Technology

LH110 Series DVR: Frequently Asked Questions

When connected to a VGA monitor, why can’t I see a mouse cursor, or

access the system menus by using the front panel controls of the DVR?

Solution 1

You may have accidently switched the system output by pressing the 0button on the

remote; or the DVR did not properly detect the VGA monitor.

To switch back to VGA mode:

1 Turn on the DVR. Wait for it to boot into the main window.

2 Press the 0(zero) button on the remote.

Pressing the 0(zero) button on the remote changes the DVR from SPOT OUT mode to VGA

mode. After the DVR is in VGA mode, you will be able to see your mouse, and have access

to the menu.

Solution 2

The DVR may not have correctly detected your VGA monitor because of a loose connection.

Perform the following:

1 Unpower the DVR.

2 Power down and re-connect the VGA monitor to the DVR. Ensure that the connection is firm.

3 Turn on the monitor.

4 Turn on the DVR. Wait for it to boot into the main window.

NOTE: After you re-connect the VGA cable between the monitor and DVR, ensure that you

first turn on the monitor, and then turn on the DVR last. This allows the DVR to

auto-detect the connected VGA monitor.

NOTE: If you still cannot see the mouse cursor, or access the menu, press the 0(zero) button

on the remote control.

2

Copyright ©2011 Lorex Technology

Manually setting the DVR output mode

You can set the DVR to always output to the VGA port by manually configuring the output

settings.

To manually adjust the output settings:

1 Right-click and click Main Menu.

2 Click Advanced>A/V Setup.

3 In the Output Device drop-down menu, select VGA.

NOTE: In the 16-channel model, select VGA in the Init DEV drop-down menu.

4 Click Apply to save your settings.

Select VGA

4/8 Channel

Select VGA

16 Channel

3

www.lorextechnology.com

Copyright ©2011 Lorex Technology

How do I change the DVR’s output resolution?

1 From live view, right-click, and click Main Menu>Advance >A/V Setup.

2 Under VGA Resolution:

• Select from the following resolutions: 800 x 600,1024 x 768, 1280 x 1024, 1440 x 900

3 Click Apply to save your settings.

4 Right-click to exit the A/V setup menu.

NOTE: The system will prompt you to restart the system. Click the OK button to restart.

4/8 channel A/V menu. 16 channel A/V menu.

VGA Resolution VGA Resolution