LUCCI Airfusion Penta Betriebsanleitung

Ver1.0-MUTI-RC

CEILING FAN MANUAL

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

LUCCI

AIRFUSIONPENTA

CEILING FANS

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION

Airfusion Penta Installation Instructions

2 | P a g e V e r 1 . 0

CONTENTS

Installation instruction manual ................................................................................................... 2

Installationsanleitung ............................................................................................................... 13

Guide d’installation ....................................................................................................................23

Manual de instrucciones de instalación...............................................................................33

Manuale delle istruzioni di installazione.....................................................................................43

Installatiehandleiding.................................................................................................................53

Airfusion Penta Installation Instructions

3 | P a g e V e r 1 . 0

THANKYOU FOR YOUR PURCHASE

Thankyou for purchasing this quality Lucci product. To ensure correct function and safety, please read and

save all instructions for future reference.

SAFETY PRECAUTIONS

1) This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Cleaning and maintenance shall not be undertaken by children without supervision.

2) Children should be supervised to ensure that they do not play with the appliance.

3) An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local

wiring rules.

WARNING: FOR SAFE USE OT THIS FAN AN ALL-POLE DISCONNECTION SWITCH MUST BE

INCORPORATED INTO THE FIXED WIRING.

This is in accordance with the latest standard AS/NZS3000.

Please note warranty will be void if installed without an all-pole disconnection switch.

4) Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems available. If

electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging your health and well-being.

5) The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.

6) The fan should be mounted so that the blades are at least 2.3 metres above the floor In Europe.

7) The fan should be mounted so that the blades are at least 2.1 metres above the floor In Australia.

8) This fan is suitable for indoor use only.

9) Only an authorized electrician should execute the installation.

Airfusion Penta Installation Instructions

4 | P a g e V e r 1 . 0

BEFORE INSTALLATION

Unpack the fan and carefully identify the parts. Please refer to Fig 1.

1. Mounting Bracket x 1

2. Down rod x 1

3. Canopy x1

4. Fan motor x 1

5. Light kit x 1

6. Lamp shade x 1

7. Blades x 5

8. Accessories x 1 set

Wall anchor x 2; Blade screw x 16; Balance kit x 1 set; Wooden screw x 2; Flat washer x 2; Spring

washer x 2

9/10.Remote control set x 1

Fig. 1

Airfusion Penta Installation Instructions

5 | P a g e V e r 1 . 0

INSTALLING THE FAN

INSTALLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of the

blade to the nearest objects or walls.

Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg,

with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures other

than wood, the appropriate screw type MUST be used.

Angled Ceiling Installation

This fan hanging system supports a maximum 20 degree angled ceiling

installation.

Fig. 2

Fig. 3

Airfusion Penta Installation Instructions

6 | P a g e V e r 1 . 0

INSTALLING THE DOWN ROD (Fig. 4)

1. Loose the ball joint (2) by removing the set screws (3).

2. Loose the bolt (6) and set screw (7) from the coupling (8).

3. Feed the down rod (4) through the canopy (5).

4. Insert the motor wires (1) through the down rod and secure the ball

joint back to the down rod.

5. Insert the down rod to the coupling; line up the coupling holes with the

down rod holes then insert and tighten the bolt.

6. Finally secure the down rod and the coupling by tightening the set

screw on the coupling.

HANG UP THE FAN (Fig. 5)

1. Lift the fan assembly onto the mounting bracket (1). Fig.5

2. Ensure the notch of the ball joint (3) is positioned on the

stopper of the mounting bracket (2) to prevent the fan from

rotating when in operation.

BLADE ATTACHMENT (Fig. 6)

1. Insert the blade (2) into the square slot of the motor

(1).

2. Secure the blade on the bracket by using 3 motor

screws (3), ensuring they are tightened

simultaneously.

3. Once completed, repeat the process on the

remaining blades.

LIGHT KIT INSTALLATION (Fig. 7)

1. Remove the screws (3) from the light kit bracket (4).

2. Connect the male and female connector (1) together.

3. Attach the light kit (2) to the light kit bracket (4) and tighten it using the screws (3)

4. Install the globes (not included).

5. Lift and attach the glass to the lamp base and secure it by turning clockwise.

Fig. 4

Fig. 5

Fig. 6

Airfusion Penta Installation Instructions

7 | P a g e V e r 1 . 0

PREPARE AND COMPLETE THE ELECTRICAL WIRING --- WIRING DIAGRAM (FIG. 8)

WARNING: FOR YOUR SAFETYALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED

ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.

PLEASE MAKE SURE THE MAIN SWITCH HAS BEEN TURNED OFF BEFORE CONNECTING

Connect “LIVE”supply wire to the “L” of the terminal block on the mounting bracket.

Connect “NEUTRAL” supply wire to the “N” of the terminal block on the mounting bracket.

Connect “EARTH” wire to the “ ” of the terminal block on the mouthing bracket.

Fig. 7

Fig. 8

Airfusion Penta Installation Instructions

8 | P a g e V e r 1 . 0

COMPLETE THE INSTALLATION

Insert the remote receiver into the mouting bracket (Fig. 8)

After completing the electrical wiring at the mounting bracket terminal and connecting the remote

receiver power input wires and fixed wiring via the 4-ports quick connectors (1); connecting remote

receiver power output wires and motor wires via the 4-ports quick connectors (2).

Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy

and that they are not damaged during this step. Secure the canopy to the hanger bracket using the

screws provided. Fig 9.

USING YOUR CEILING FAN

REMOTE CONTROL

Your ceiling fan is controlled via the remote control. There are 4 buttons (HI, MED, LOW, OFF) to control

the fan speed and one button to control light on/off. Fig. 12

Before operating the remote, the following must be considered.

-2 x AAA 1.5V (size) batteries are required to operate the remote control. Remove the battery cover

from the back of the remote and insert 2 x AAA batteries. Ensure the polarities are correct as

shown in the battery compartment. (Batteries not included.)

-The remote (transmitter) and receiver must be configured so that communication between each

other is paired up. This is achieved by setting the DIP switch on the receiver and remote on the

same setting.

Note: The DIP switch assembly has 4 switches which can be setup to 16 different transmitting code

combinations. This is practical when there is more than 1 remote/receiver pair operating locally or

in the same room.

Note: To access the receiver DIP switches, remove the DIP switch cover.

Fig. 9

Airfusion Penta Installation Instructions

9 | P a g e V e r 1 . 0

Fig. 10 Remote battery compartment Fig. 11 Receiver DIP switch

OPERATING THE REMOTE:

Before you start using the remote, take the time to read through this section and get familiar with the

buttons and function of each button.

LED Indicator

The red LED indicator on the top of the transmitter will flash when

the buttons are active.

BUTTONS ON THE REMOTE

HI: Press the button to set fan running at High speed.

MED: Press the button to set fan running at Medium speed.

LOW: Press the button to set fan running at Low speed.

OFF: Press the button to turn OFF the fan.

: Press the button to turn ON/ OFF the light.

The remote has memory function. If the fan or light is turned off by

the isolating switch, it will memorise and recover the last status

when turned on next.

REVERSING SWITCH

Your ceiling fan can operate in either summer or winter mode.

SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate in

an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

Fig. 12

Airfusion Penta Installation Instructions

10 | P a g e V e r 1 . 0

WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a

clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy

conservation in winter.

Reverse Switch

AFTER INSTALLATION

WOBBLE:

NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE

MOUNTED ON A RUBBER GROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE CEILING IT

WOULD CAUSE EXCESSIVE VIBRATION. MOVEMENT OF A FEW CENTIMETRES IS QUITE

ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM.

TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH FIX THE MOUNTING

BRACKET AND DOWN ROD ARE SECURE.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please refer

to the instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing

should the ceiling fan become un-balanced again. Store your balancing kit away after installation for future

use if required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and

frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in fan

motor noise. This is normal. Please allow a 24-hour “breaking -in” period, most noises associated with a

Fig. 13

Inhaltsverzeichnis

Sprachen:

Andere LUCCI Lüfter Handbücher

LUCCI

LUCCI WHITEHAVEN Betriebsanleitung

LUCCI

LUCCI AIRFUSION BANKSIA 4675856 Installationsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Leitfaden

LUCCI

LUCCI AIRFUSION BREEZE Bedienungsanleitung

LUCCI

LUCCI Airfusion Radar Leitfaden

LUCCI

LUCCI ATLANTA Bedienungsanleitung

LUCCI

LUCCI FUTURA ECO Montage- und Bedienungsanleitung

LUCCI

LUCCI WHITEHAVEN Bedienungsanleitung

LUCCI

LUCCI AIRFUSION AKMANI Betriebsanleitung

LUCCI

LUCCI GRENADA Series Installationsanleitung

LUCCI

LUCCI AIRFUSION TURBO III Bedienungsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

LUCCI

LUCCI Airfusion Aria Bedienungsanleitung

LUCCI

LUCCI NEWPORT Installationsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

LUCCI

LUCCI AIRFUSION AIRLIE ECO SERIES Bedienungsanleitung

LUCCI

LUCCI Futura 48 inch Bedienungsanleitung

LUCCI

LUCCI FIJIAN II Bedienungsanleitung

LUCCI

LUCCI FIJIAN II Series Service-Handbuch

LUCCI

LUCCI AIRFUSION QUEST II Bedienungsanleitung

LUCCI

LUCCI ATLANTA Installationsanleitung

LUCCI

LUCCI ARRAY DC Bedienungsanleitung

LUCCI

LUCCI Airfusion Radar Bedienungsanleitung

LUCCI

LUCCI 200280 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung