LUCCI FIJIAN II Series Service-Handbuch

Fijian ii - V1.0 –WS-MUTIL

CEILING FAN MANUAL

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

LUCCI

FIJIAN II SERIES

CEILING FANS

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

GB Installation Instruction Manual .......................................................................................... 3

CONTENTS

Congratulations on purchasing this quality Lucci product. To ensure correct function and

safety, please read and save all instructions carefully before using the product.

The information contained in the following pages has been prepared to ensure you of

trouble-free operation of your Ceiling Fan .

1. This appliance is NOT intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

2. The all-poles disconnection must be incorporated in the fixed wiring in accordance with

local wiring rules.

3. Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities. Contact your local government for information regarding the collection

systems available. If electrical appliances are disposed of in landfills or dumps, hazardous

substances can leak into the groundwater and get into the food chain, damaging your

health and well-being.

4. The structure to which the fan is to be mounted must be capable of supporting a weight of

40KG.

5. The fan should be mounted so that the blades are at least 2.3 meters above the floor in

Europe

6. The fan should be mounted so that the blades are at least 2.1 meters above the floor in

Australia

7. The fan is designed for indoor use only. Mounting the fan in a situation where it is subject

to water or moisture is dangerous.

8. Only an authorized electrician should execute the installation.

CONGRATULATIONS ON YOUR PURCHASE

SAFETY PRECAUTIONS

Unpack the fan and carefully identify the parts. Please refer to Fig 1.

1 Down rod x 1 8 Blade screws x 16

2 Blade holder x 5 9 Motor screws x 11

3 Blade x 5 10 Wooden screws x 2

4 Mounting bracket x 1 11 Wall plugs for screw x 2

5 Canopy x 1 12 Balance kits x 1 sets

6 Motor x 1 13 Wall switch x 1 sets

7 Switch housing x 1

NOTE：Some models do not include the light kit, please refer to technical information.

BEFORE INSTALLATION

Fig. 1

The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of

the blade to the nearest objects or walls.

Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at

least 40KG, with two long screws provided. Ensure at least 30mm of the screw is threaded into the

support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures

other than wood, the appropriate screw type MUST be used.

Angled Ceiling Installation

This fan hanging system supports a maximum 22

degree angled ceiling installation.

INSTALLING THE MOUNTING BRACKET

Fig. 2

Fig. 3

Install the down rod

1. Loose ball joint.

2. Feed down rod through ceiling canopy.

3. Insert the motor wires through down rod, and then secure

ball joint back to down rod.

4. Insert down rod to hanger (see Fig.4), line up hanger

holes with down rod holes and insert bolt. Then insert pin

to end of bolt.

5. Finally secure down rod and hanger by tightening two

screws on the hanger.

6. Lift fan assembly onto mounting bracket. Fig.5.

7. Ensure the notch of the ball joint is positioned

on the stopper of mounting bracket to prevent

fan from rotating when in operation.

Blade attachment

1. Before Installing the blades, remove the motor screws.

2. Assemble the blades & holders using the screw set. (Fig. 6)

3. Secure the blade on the motor by using 2 screws with washers (Fig.7). Once completed, repeat

the process on remaining blades.

HANGING THE FAN

BLADE INSTALLATION

Fig. 7

Fig. 6

Fig. 5

Fig. 4

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY

A LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE

FIXED WIRING.

NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is

omitted when no light kit is use with the ceiling fan.

Rotary switch and capacitor wiring diagram.

ELECTRICAL WIRING DIAGRAM

Fig. 8

Fig. 9

After completing the electrical connection at the mounting bracket terminal block, connect the

ceiling fan wiring via the quick connector plug.

Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the

canopy and that they are not damaged during this step. Secure the canopy to the hanger bracket

using the screws provided. Fig 10.

LIGHT FUNCTION (Light kit sold separately)

The fan can use with light kit which Beacon lighting provided. Remove the light kit housing

cover and install the light kit to switch housing. For details please refer to light kit installation

guide.

The fan light can be switched ON/OFF via the light switch on the Wall Controller. Fig.11

NOTE: ONLY LIGHT KITS RECOMMENDED BY THE SUPPLIER, WILL BE COVERED UNDER WARRANTY.

FINISHING THE INSTALLATION

Fig. 10

FAN WALL CONTROL

Your ceiling fan is controlled via the rotary switch (fan) and rocker switch (light) via the wall controller. Refer to

below figures:

SWITCH POSITION

(ARROW POINTING) DESCRIPTION

OFF – FAN IS OFF

1 – FAN IS “ON”, SPEED = HIGH

2 – FAN IS “ON”, SPEED = MEDIUM

3 – FAN IS “ON”, SPEED = LOW

LIGHT SWITCH – Toggle to switch ON/OFF the light

WALL CONTROLLER

USING YOUR CEILING FAN

Fig. 11

REVERSING SWITCH

Your ceiling can operate either summer or winter mode.

SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan

rotate in an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a

clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for

energy conservation in winter.

Reverse Switch

WOBBLE:

NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY

ARE MOUNTED ON A RUBBER GROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE

CEILING IT WOULD CAUSE EXCESSIVE VIBRATION. MOVEMENT OF A FEW CENTIMETRES IS

QUITE ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM.

TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH FIX THE

MOUNTING BRACKET AND DOWN ROD ARE SECURE.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please

refer to the instruction on how to use the balancing kit. The balancing kit can be used to assist

re-balancing should the ceiling fan become un-balanced again. Store your balancing kit away after

installation for future use if required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations

Fig. 12

AFTER INSTALLATION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LUCCI Lüfter Handbücher

LUCCI

LUCCI ATLANTA Installationsanleitung

LUCCI

LUCCI BREEZER SERIES Bedienungsanleitung

LUCCI

LUCCI Futura 48 inch Bedienungsanleitung

LUCCI

LUCCI AIRLIE HUGGER 36 Bedienungsanleitung

LUCCI

LUCCI ABYSS Series Bedienungsanleitung

LUCCI

LUCCI NAUTICA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Bedienungsanleitung

LUCCI

LUCCI Airfusion Aria Bedienungsanleitung

LUCCI

LUCCI AIRFUSION CAROLINA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Betriebsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Leitfaden

LUCCI

LUCCI NEWPORT Installationsanleitung

LUCCI

LUCCI AIRFUSION COMMAND II Series Bedienungsanleitung

LUCCI

LUCCI AIRFUSION CLIMATE II LD52WH Bedienungsanleitung

LUCCI

LUCCI ATLANTA Bedienungsanleitung

LUCCI

LUCCI Airfusion Airmover Bedienungsanleitung

LUCCI

LUCCI WHITEHAVEN Bedienungsanleitung

LUCCI

LUCCI FUTURA ECO Montage- und Bedienungsanleitung

LUCCI

LUCCI AIRFUSION BANKSIA Bedienungsanleitung

LUCCI

LUCCI TAHITIAN SERIES Bedienungsanleitung

LUCCI

LUCCI Airfusion Radar Leitfaden

LUCCI

LUCCI AIRFUSION BREEZE Bedienungsanleitung

LUCCI

LUCCI FIJIAN II Bedienungsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung