LUCCI Airfusion Aria Bedienungsanleitung

V2.0 EN -WS- Published on 08. 2017

LUCCI

AIRFUSION ARIA

CEILING FAN

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Aria Installation Instructions

1 | P a g e

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read

and save all instructions before using the product.

SAFETY PRECAUTIONS

1. In Europe: This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning the use of the appliance in a safe way and

understand the hazards involved. Cleaning and maintenance shall not be undertaken by children

without supervision.

2. In Australia: The appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning the use of the appliance by a person responsible

for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local

wiring rules.

IN AUSTRALIA

WARNING:

FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION

MUST BE INCORPORATED INTO THE FIXED WIRING IN

ACCORDANCE WITH THE WIRING RULES.

As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the

minimum electrical safety of this standard.

Please note warranty will be void if installation is without a means for

an all-pole disconnection incorporated in the fixed wiring in

accordance with the wiring rules.

Example: If a fan is connected to a circuit that can be isolated via an

Aria Installation Instructions

2 | P a g e

all-pole safety switch at the switchboard, then this is considered to be

an all-pole disconnection to the ceiling fan electrical circuit, meeting

the requirements of clause 7.12.2 of AS/NZS 60335.1.

A single-pole switch on the active of the receiver input of remote

control must also be included in the wiring, and located the same

room as the ceiling fan.

5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems available. If

electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the

ground water and get into the food chain, damaging your health and well-being.

6. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.

7. The fan should be mounted so that the blades are at least 2.3 m above the floor in Europe or 2.1 m

above the floor in Australia.

8. This fan is suitable for indoor, alfresco and coastal areas where the fan is fully undercover with a

minimum of 2 walls. This fan is not waterproof. When installed in an alfresco or coastal area, the

ceiling fan must be positioned in a location protected from water, wind and dust. Exposure to these

elements will void the warranty. Mounting the fan in a situation where it is subject to water or

moisture is dangerous.

9. Only a licensed electrician should execute the installation.

Aria Installation Instructions

3 | P a g e

BEFORE INSTALLATION

Unpack your ceiling fan carefully. Remove all parts and hardware. Examine all parts, you should have

the following:

Fan without light

Fan with light

Mounting bracket x 1

Pre-assembled fan motor, down rod and canopy

x 1

Pre-assembled fan motor, down rod and

canopy x 1

Blades x 4

Bottom cover x 1

LED light kit x 1

Screw for mounting bracket x 2

Motor screws for blades x 9

Flat washer for blades x 9

Balancing kit x 1 set

Wall switch x 1 set

Fig. 1

Aria Installation Instructions

4 | P a g e

INSTALLING THE MOUNTING BRACKET

•The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the blade to

the nearest objects or walls.

•Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg,

with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures other than

wood, the appropriate screw type MUST be used.

Angled ceiling Installation

This fan hanging system supports a maximum 15 degree angled

ceiling installation.

Fig. 2

Fig. 3

Aria Installation Instructions

5 | P a g e

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is

positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in

operation. (Fig.4)

INSTALLING THE FAN

Blade attachment

1. Before Installing the blades, remove the motor screws and flat washers.

2. Secure the blade on the motor by using 2 screws with washers to tighten it, ensuring they are

tightened simultaneously. (Take care not to over tighten as this can damage blades)

Once completed, repeat the process on the remaining blades.

Installing the bottom cover (For fan without light)

Secure the bottom cover to the fan by turning it clockwise.

Installing the LED light kit (For fan with light)

Attach the LED light kit to the lamp base and connect wires to the LED light kit

via the quick connectors. Secure the LED light kit on the lamp base by turning

the LED light kit body clockwise.

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Aria Installation Instructions

6 | P a g e

ELECTRICAL WIRING DIAGRAM

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A

LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED

WIRING.

NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is

omitted when no light kit is used with the ceiling fan.

USE WITH WALL SWITCH WIRING DIAGRAM:

USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold separately)

1/ Remote without plugs

Fig. 8

Fig. 9

Aria Installation Instructions

7 | P a g e

2/ Remote with plugs

FINISHING THE INSTALLATION

•After completing the electrical connection at the mounting bracket terminal block, connect the ceiling

fan wiring via the quick connector plug.

•Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy

and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using

the screws provided.

Fig. 10

Fig. 11

Aria Installation Instructions

8 | P a g e

USING YOUR CEILING FAN

FAN WALL CONTROL

Turn on the power and check the operation of the fan.

• OFF Position – Fan off

• 3rd Position – Low fan speed

• 2nd Position –Medium fan speed

• 1st Position – High fan speed

Light Control

• Toggle Switch – On/off

REVERSING SWITCH

Your ceiling fan can operate in either summer or winter mode.

SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate in an

anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a clockwise

direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy conservation in

winter.

Fig. 13

Fig. 12

Aria Installation Instructions

9 | P a g e

AFTER INSTALLATION

WOBBLE:

NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the

fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimetres is quite

acceptable and DOES NOT suggest any problem.

TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down rod are

secure.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please refer to the

instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing should the ceiling

fan become un-balanced again. Store your balancing kit away after installation for future use if required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency

signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise. This

is normal. Please allow a 24-hour “settling-in” period, most noises associated with a new fan disappear during this

time.

The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the

motor run –All electric motors are audible to some extent.

CARE AND CLEANING:

•Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to

avoid scratching the paint finish. Please turn off electricity power when you do so.

•Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the

possibility of an electrical shock.

•The motor has a permanently lubricated ball bearing so there is no need to oil.

NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.

TECHNICAL INFORMATION

Aria fan models

Rated Voltage

Rated power (motor)

Rated power lamp

48 inch blade fan only

220-240 VAC

50W

N/A

48 inch blade fan with light

220-240 VAC

50W

18W, LED Life time:

30,000H, NON-DIM

Andere Handbücher für Airfusion Aria

Inhaltsverzeichnis

Andere LUCCI Lüfter Handbücher

LUCCI

LUCCI TAHITIAN SERIES Bedienungsanleitung

LUCCI

LUCCI AIRFUSION BANKSIA 4675856 Installationsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Leitfaden

LUCCI

LUCCI NAUTICA Bedienungsanleitung

LUCCI

LUCCI Airfusion Aria Service-Handbuch

LUCCI

LUCCI AIRFUSION BREEZE Service-Handbuch

LUCCI

LUCCI MXSQ8PW Installationsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

LUCCI

LUCCI BREEZER SERIES Bedienungsanleitung

LUCCI

LUCCI Airfusion Penta Betriebsanleitung

LUCCI

LUCCI NORDIC Series Service-Handbuch

LUCCI

LUCCI FUTURA ECO SERIES Bedienungsanleitung

LUCCI

LUCCI WHITEHAVEN Bedienungsanleitung

LUCCI

LUCCI GRENADA Series Installationsanleitung

LUCCI

LUCCI AIRFUSION CAROLINA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

LUCCI

LUCCI Futura 48 inch Bedienungsanleitung

LUCCI

LUCCI WHITEHAVEN Betriebsanleitung

LUCCI

LUCCI AIRFUSION AKMANI Betriebsanleitung

LUCCI

LUCCI FIJIAN II Series Service-Handbuch

LUCCI

LUCCI Viceroy Leitfaden

LUCCI

LUCCI ARRAY DC Bedienungsanleitung

LUCCI

LUCCI Airfusion Radar Bedienungsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung