LUCCI AIRFUSION QUEST II Bedienungsanleitung
V1.1- publication on 07.2016
LUCCI
AIRFUSION QUEST II
CEILING FAN
•INSTALLATION
•OPERATION
•MAINTENANCE
•WARRANTY INFORMATION
CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
INSTALLATION AND FAN OPERATION.
Airfusion QUEST II Installation Instructions
2 | P a g e
THANK YOU FOR PURCHASING
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read
and save all instructions before using the product.
SAFETY PRECAUTIONS
1. In Europe: This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Cleaning and maintenance shall not be undertaken by children
without supervision.
2. In Australia: The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
3. Children should be supervised to ensure that they do not play with the appliance.
4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local
wiring rules.
IN AUSTRALIA
WARNING:
FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION
MUST BE INCORPORATED INTO THE FIXED WIRING IN
ACCORDANCE WITH THE WIRING RULES.
As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the
minimum electrical safety of this standard.
Please note warranty will be void if installation is without a means
Airfusion QUEST II Installation Instructions
3 | P a g e
for an all-pole disconnection incorporated in the fixed wiring in
accordance with the wiring rules.
Example: If a fan is connected to a circuit that can be isolated via an
all-pole safety switch at the switchboard, then this is considered to
be an all-pole disconnection to the ceiling fan electrical circuit,
meeting the requirements of clause 7.12.2 of AS/NZS 60335.1.
A single-pole switch also must be placed in the same room as
the fan as per local wiring regulations AS3000
5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
ground water and get into the food chain, damaging your health and well-being.
6. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.
7. The fan should be mounted so that the blades are at least 2.3m above the floor in Europe or 2.1m
above the floor in Australia.
8. This fan is designed for indoor use only. Mounting the fan in a location where it is subject to water or
moisture is dangerous and will void the warranty.
9. Only a licensed electrician should execute the installation.
Airfusion QUEST II Installation Instructions
4 | P a g e
BEFORE INSTALLATION
Unpack your ceiling fan and carefully identify the parts. Please refer to Fig 1.
1. Canopy screw x 4
2. Mounting bracket x 1
3. Screw for mounting bracket x 2
4. Motor screws x 9
5,8. Blade holder screw set x 13
6. Blade holder x 4
7. Blade x 4
9. Pre-assembled fan motor, down
rod and canopy x 1
10. Decorative cover x 1
11. Light connector x 1 (For models
with light kit only)
12. Light base x 1 (For models with light kit only)
13. Screw nut x 1 (For models with light kit only)
14. Glass shade x 1 (For models with light kit only)
15. Wall switch control (15) x 1 set
NOTE：Some models do not include the light kit, please refer to technical information.
Fig. 1
Airfusion QUEST II Installation Instructions
5 | P a g e
INSTALLING THE MOUNTING BRACKET
•The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from
the tip of the blade to the nearest objects or walls.
•Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
30kg, with the two long screws provided. Ensure at least 30mm of the screw is threaded into the
support.
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used.
Angled Ceiling Installation
This fan hanging system supports a maximum 18 degree
angled ceiling installation.
Fig. 2
Fig. 3
Airfusion QUEST II Installation Instructions
6 | P a g e
HANGING THE FAN
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.4)
FAN INSTALLATION
BLADE ATTACHMENT
1. Before installing the blades, remove the motor screws.
2. Assemble the blades and holders using the blade holder screw sets.
3. Insert the hook of the blade holder into the square hole of motor.
4. Secure the blade on the motor with the 2 motor screws, and ensure that screws are tightened evently.
Once completed, repeat this process for all blades.
Fig. 4
Fig. 5
1
2
3
4
Airfusion QUEST II Installation Instructions
7 | P a g e
LIGHT KIT INSTALLATION (For models with fan light kit only)
1. Remove the decorative cover from the shaft.
2. Pull the L and N wire out from the shaft.
3. Insert wires through the light connector (1).
4. Tighten the light connector into the shaft firmly with a spanner.
5. Secure the light base (2) to the copper connector (1) by tightening the screw nut (3).
6. Take off the wire protective cover (5) from the terminal block (4) by loosening the screw nut (6).
7. Connect the L and N wire from fan to the terminal block (4) on the light base according to the label.
8. Re-install the wire protective cover.
9. Install the globes (not included).
10. Lift and attach the glass (7) to the lamp base and secure it by using three spring clips (8).
Fig. 6
Fig. 7
Airfusion QUEST II Installation Instructions
8 | P a g e
ELECTRICAL WIRING DIAGRAM
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION MUST BE INCORPORATED IN THE FIXED
WIRING IN ACCORDANCE WITH THE WIRING RULES.
NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is omitted when
no light kit is used with the ceiling fan.
USE WITH WALL SWITCH WIRING DIAGRAM:
Fig. 8
Airfusion QUEST II Installation Instructions
9 | P a g e
USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold seperately)
1/ Remote without plugs
2/ Remote with plugs
Fig. 10
Fig. 9
Airfusion QUEST II Installation Instructions
10 | P a g e
FINISHING THE INSTALLATION
•After completing the electrical connection at the mounting bracket terminal block, connect the ceiling
fan wiring via the quick connector plug.
•Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using
the screws provided.
USING YOUR CEILING FAN
FAN WALL CONTROL
Turn on the power and check the operation of the fan.
• OFF Position – Fan off
• 3rd Position – Low fan speed
• 2nd Position – Medium fan speed
• 1st Position – High fan speed
Light Control
• Toggle Switch – On/off
REVERSING SWITCH
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch should be in the “down” (SUMMER) position to rotate the fan in an
anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch should be in the “up” (WINTER) position to rotate the fan in a
clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy
conservation in winter.
Fig. 11
Fig. 12
Andere Handbücher für AIRFUSION QUEST II
2
Inhaltsverzeichnis
Andere LUCCI Lüfter Handbücher
LUCCI
LUCCI 200280 Bedienungsanleitung
LUCCI
LUCCI AIRFUSION AKMANI Betriebsanleitung
LUCCI
LUCCI Futura 48 inch Bedienungsanleitung
LUCCI
LUCCI THERMALITE 3 IN 1 Service-Handbuch
LUCCI
LUCCI NEWPORT Installationsanleitung
LUCCI
LUCCI MXSQ8PW Installationsanleitung
LUCCI
LUCCI BREEZER SERIES Bedienungsanleitung
LUCCI
LUCCI AIRFUSION RESORT Bedienungsanleitung
LUCCI
LUCCI WHITEHAVEN Bedienungsanleitung
LUCCI
LUCCI AIRFUSION BANKSIA 4675856 Installationsanleitung
LUCCI
LUCCI ATLANTA Installationsanleitung
LUCCI
LUCCI AIRFUSION CLIMATE II LD52WH Bedienungsanleitung
LUCCI
LUCCI FUTURA ECO Montage- und Bedienungsanleitung
LUCCI
LUCCI AIRFUSION BANKSIA Bedienungsanleitung
LUCCI
LUCCI Airfusion Penta Betriebsanleitung
LUCCI
LUCCI AIRFUSION BREEZE Service-Handbuch
LUCCI
LUCCI AIRFUSION COMMAND II Series Bedienungsanleitung
LUCCI
LUCCI ARRAY DC Bedienungsanleitung
LUCCI
LUCCI AIRFUSION AIRLIE ECO SERIES Bedienungsanleitung
LUCCI
LUCCI Airfusion Radar Leitfaden
