LUCCI Airfusion Airmover Bedienungsanleitung

V1.0- EN– Published on 08. 2017

LUCCI

AIRFUSION AIRMOVER

CEILING FAN

 INSTALLATION

 OPERATION

 MAINTENANCE

 WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Airfusion Airmover Installation Instructions

2 | P a g e

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read

and save all instructions before using the product.

SAFETY PRECAUTIONS

1. In Europe: This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning the use of the appliance in a safe way and

understand the hazards involved. Cleaning and maintenance shall not be undertaken by children

without supervision.

2. In Australia: The appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning the use of the appliance by a person responsible

for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local

wiring rules.

IN AUSTRALIA

WARNING:

FOR SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION

MUST BE INCORPORATED INTO THE FIXED WIRING IN

ACCORDANCE WITH THE WIRING RULES.

As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the

minimum electrical safety of this standard.

Please note warranty will be void if installation is without a means for

an all-pole disconnection incorporated in the fixed wiring in

accordance with the wiring rules.

Airfusion Airmover Installation Instructions

3 | P a g e

Example: If a fan is connected to a circuit that can be isolated via an

all-pole safety switch at the switchboard, then this is considered to be

an all-pole disconnection to the ceiling fan electrical circuit, meeting

the requirements of clause 7.12.2 of AS/NZS 60335.1.

A single-pole switch on the active of the receiver input of remote

control must also be included in the wiring, and located the same

room as the ceiling fan.

5. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems available. If

electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the

ground water and get into the food chain, damaging your health and well-being.

6. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.

7. The fan should be mounted so that the blades are at least 2.3m above the floor in Europe or 2.1m

above the floor in Australia.

8. This fan is suitable for indoor and alfresco areas where the fan is fully undercover with a minimum of

2 walls. This fan is not waterproof. When installed in an alfresco area, the ceiling fan must be

positioned in a location protected from water, wind, dust and salt. Exposure to these elements will

void the warranty. Mounting the fan in a situation where it is subject to water or moisture is

dangerous.

9. Only a licensed electrician should execute the installation.

Airfusion Airmover Installation Instructions

4 | P a g e

BEFORE INSTALLATION

Unpack the fan and carefully identify the parts. Please refer to Fig 1.

1 Mounting bracket x 1 8 Bottom cover x 1

2 Canopy x 1 9 Blade x 5

3 Down rod with ball joint x 1 10

Wooden screw x 2

4 Coupling cover x 1 11

Extra Motor screw x 1

5 Bolt x 1 12

Flat washer x 1

6 Pin x 1 13

Balance kit x 1 set

7 Motor assembly x 1 14

Wall switch with mounting screws x 1 set

Fig. 1

Airfusion Airmover Installation Instructions

5 | P a g e

INSTALLING THE MOUNTING BRACKET

 The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing

from the tip of the blade to the nearest objects or walls.

 Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at

least 30kg, with the two long screws provided. Ensure at least 30mm of the screw is threaded into

the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures

other than wood, the appropriate screw type MUST be used.

Angled Ceiling Installation

This fan hanging system supports a maximum 15 degree angled

ceiling installation.

Fig. 2

Fig. 3

Airfusion Airmover Installation Instructions

6 | P a g e

INSTALLING THE FAN

Installing the down rod

1) Feed the down rod (6) through the canopy (5) and the coupling cover (7).

2) Remove the ball joint (4) and cross pin (2) by loosening the set screw (3), insert the motor wires

(1) through the down rod then secure the ball joint and cross pin back to the down rod.

3) Insert the down rod to the coupling (8), line up the coupling holes with the down rod holes and

insert the bolt (10). Then insert the pin (11) to the end of the bolt.

4) Finally secure the down rod and coupling by tightening the two set screws (9) on the coupling.

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is

positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in

operation. (Fig.5)

Fig. 5

Fig. 4

Airfusion Airmover Installation Instructions

7 | P a g e

BLADE INSTALLATION

BLADE ATTACHMENT (Fig.6)

 Align the two holes of the blade (3) to the fan

motor assembly (1).

 Secure the blade with two blade screws (4) and

flat washers (2) provided.

 Follow the same process for the remaining four

blades.

ELECTRICAL WIRING DIAGRAM

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A

LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED

WIRING.

NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram and switch is

omitted when no light kit is used with the ceiling fan.

USE WITH WALL SWITCH WIRING DIAGRAM:

Fig. 6

Fig. 7

Airfusion Airmover Installation Instructions

8 | P a g e

USE WITH REMOTE WIRING DIAGRAM: (REMOTE sold separately)

1/ Remote without plugs

2/ Remote with plugs

Fig. 8

Fig. 9

Airfusion Airmover Installation Instructions

9 | P a g e

FINISHING THE INSTALLATION

 After completing the electrical connection at the mounting bracket terminal block, connect the ceiling

fan wiring via the quick connector plug.

 Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy

and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using

the screws provided.

USING YOUR CEILING FAN

FAN WALL CONTROL

Turn on the power and check the operation of the fan.

• OFF Position – Fan off

• 3rd Position – Low fan speed

• 2nd Position – Medium fan speed

• 1st Position – High fan speed

Light Control

• Toggle Switch – On/off

REVERSE FUNCTION

Your ceiling fan can operate either in fan mode or reverse fan mode.

SUMMER Mode: The reverse switch should be in the “down” (SUMMER) position to rotate the fan in an

anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch should be in the “up” (WINTER) position to rotate the fan in a

clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for

energy conservation in winter.

Fig. 11

Fig. 10

Airfusion Airmover Installation Instructions

10 | P a g e

The reverse switch is located in the top of the motor housing. Slide the switch to the LEFT for summer

weather operation. Slide the switch to the RIGHT for winter weather operation.

AFTER INSTALLATION

WOBBLE:

NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber

grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a

few centimetres is quite acceptable and DOES NOT suggest any problem.

TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and

down rod are secure.

NOTE: This fan has been precision balanced at the factory and will not need to be balanced again.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and

frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in

fan motor noise. This is normal. Please allow a 24-hour “breaking-in” period, most noises associated

with a new fan disappear during this time. Please note that this is not a product fault and as such is not

covered under warranty – All electric motors are audible to some extent.

CARE AND CLEANING:

 Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free

cloth to avoid scratching the paint finish. Please turn power off when you do so.

 Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create

the possibility of an electrical shock.

 The motor has a permanently lubricated ball bearing so there is no need to oil

NOTE: Always turn off the power at the mains switch before attempting to clean your fan.

Fig. 12

Inhaltsverzeichnis

Andere LUCCI Lüfter Handbücher

LUCCI

LUCCI Futura 48 inch Bedienungsanleitung

LUCCI

LUCCI Airfusion Aria Bedienungsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Bedienungsanleitung

LUCCI

LUCCI AIRFUSION AKMANI Betriebsanleitung

LUCCI

LUCCI Airfusion Aria Service-Handbuch

LUCCI

LUCCI AIRLIE HUGGER 36 Bedienungsanleitung

LUCCI

LUCCI Airfusion Radar Bedienungsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

LUCCI

LUCCI FUTURA ECO SERIES Bedienungsanleitung

LUCCI

LUCCI AIRFUSION TURBO III Bedienungsanleitung

LUCCI

LUCCI AIRFUSION CLIMATE II LD52WH Bedienungsanleitung

LUCCI

LUCCI BREEZER SERIES Bedienungsanleitung

LUCCI

LUCCI NAUTICA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION AIRLIE ECO SERIES Bedienungsanleitung

LUCCI

LUCCI FIJIAN II Bedienungsanleitung

LUCCI

LUCCI AIRFUSION CAROLINA Bedienungsanleitung

LUCCI

LUCCI NORDIC Series Service-Handbuch

LUCCI

LUCCI GRENADA Series Installationsanleitung

LUCCI

LUCCI FIJIAN II Series Service-Handbuch

LUCCI

LUCCI Airfusion Radar Leitfaden

LUCCI

LUCCI WHITEHAVEN Betriebsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Leitfaden

LUCCI

LUCCI 200280 Bedienungsanleitung

LUCCI

LUCCI AIRFUSION BREEZE Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung