Major tech MT662 Bedienungsanleitung

INSTRUCTION MANUAL

DESKTOP

THERMO-HYGROMETER

MT662

1. Product performance

• Environment comfort display: COMFORT (comfortable), WET (high

humidity), DRY

• Temperature measuring range: 0°C~50°C (32°F~120°F)

• Temperature measurement accuracy: ± 1.0°C (1.8°F)

• Temperature display resolution: 0.1°C (0.1°F)

• Humidity measuring range: 10% RH-90% RH

• Humidity measuring accuracy: ±5% (40% RH-80% RH) other ±8%

• Battery: AAA 1.5V

• Time/temperature/humidity display

• °C/°F temperature units the way self-locking switch show

• Highest/lowest temperature and humidity memory function

• Calendar shows that the whole point timekeeping, daily alarm functions,

12/24 hour clock

2. Feature set

2.1. The basic function keys

• [MODE] clock/alarm function mode switching

• [ADJ] settings adjust the value of projects/On, Off alarm clock/display

date

• [MEMO] showed that the maximum memory, the most low-temperature,

humidity values, and clear the memory of temperature and humidity

values

• [°C/°F] self-locking switch means temperature display unit

• [RESET] to clear all settings and memory data back system the initial

status

2.2. Clock and date settings

• Press [MODE] key to set the replacement of items: Minutes CLOCK

12/24Time Month Date Exit-set. Press [ADJ] key to add one item,

hold down the [ADJ] 2 seconds after 8Hz Express since increasing minute

second set automatically cleared, set the month, when the day's largest

auto-adjust the number of days, 1 minute without keys automatically exit.

• Detail: According to [MODE] 2 second to enter the clock setting mode,

minutes begin blinking, press [ADJ] regulation minutes.

Then [MODE] click, clock start blinking, press [ADJ]

regulator clock.

• Then [MODE] click conversion 12/24 hours, according to

[ADJ] regulation. Then [MODE] about the month start

flashing, press [ADJ] regulation.

• Then [MODE] about the date of start blinking, press

[ADJ] regulation. Then click the [MODE] to confirm

and exit mode.

2.3. Alarm clock settings

• Press [ADJ] key to set the replacement items:

Alarm Clock The whole point timekeeping Alarm

clock, the whole point of time at the same time open

Alarm clock, the whole point timekeeping clearance

simultaneously.

• Detailed Description: according to [MODE] click to

display the alarm time, and then press and hold [MODE]

2 seconds, minutes start flashing in accordance with

[ADJ] regulation minutes, and then [MODE] you start blinking clock

according to [ADJ] regulator clock, row by [MODE] twice to confirm.

• Open and turn off the alarm:

Click the [MODE] key to display the alarm time, click the [ADJ] button of

" " symbol, then [ADJ] button click the " " symbol, Then [ADJ] button

click the " " symbols, two functions simultaneously express the

opening of a row by the [ADJ] key to enable or turn off this feature, press

[MODE] button to confirm exit.

2.4. Date of Show

• At the current status of the clock click [ADJ] automatically display the

date, not three seconds after the exit button.

2.5. Maximum/minimum temperature and humidity values

• According to [MEMO] showed that temperature and humidity memory

Maximum (MAX)/minimum (MIN), Length by more than 2 seconds to

clear memory of temperature and humidity values.

2.6. Environment comfort display

• Temperature at 20°C~26°C (68°F~8.8°F), relative humidity at 50% RH-

70% RH show between "•COMFORT" comfort symbols.

• At any temperature, relative humidity above 70% RH show "•WET" sign

high humidity.

• At any temperature, relative humidity below 50% RH show "• DRY"

symbols do bath.

Note:

• Applicable environment: home, office and places of non-corrosive gas.

• Use the ambient temperature range: 0°C~50°C (32°F~120°F).

www.major-tech.com www.majortech.com.au

[email protected] [email protected]

MAJOR TECH (PTY) LTD

South Africa Australia

Inhaltsverzeichnis

Andere Major tech Messgerät Handbücher

Major tech

Major tech MT943 Bedienungsanleitung

Major tech

Major tech MT782 Bedienungsanleitung

Major tech

Major tech MT940 Bedienungsanleitung

Major tech

Major tech MT935 Bedienungsanleitung

Major tech

Major tech MTD15 Bedienungsanleitung

Major tech

Major tech MT740 Bedienungsanleitung

Major tech

Major tech MT960 Bedienungsanleitung

Major tech

Major tech MT766 Bedienungsanleitung

Major tech

Major tech MT950 Bedienungsanleitung

Major tech

Major tech MTD70T Bedienungsanleitung

Major tech

Major tech MT745 Bedienungsanleitung

Major tech

Major tech MT123 Bedienungsanleitung

Major tech

Major tech MT873 Bedienungsanleitung

Major tech

Major tech MT785 Bedienungsanleitung

Major tech

Major tech MTD73A Bedienungsanleitung

Major tech

Major tech MT26 Bedienungsanleitung

Major tech

Major tech MT715 Bedienungsanleitung

Major tech

Major tech MT 770 Bedienungsanleitung

Major tech

Major tech MT713 Bedienungsanleitung

Major tech

Major tech MT948 Bedienungsanleitung

Major tech

Major tech MT720 Bedienungsanleitung

Major tech

Major tech MT945 Bedienungsanleitung

Major tech

Major tech TRUERMS MTD80 Bedienungsanleitung

Major tech

Major tech K2007R Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung