Mandik MSD Bedienungsanleitung

These technical specifications state a row of manufactured sizes and models of multi smoke dampers (further only

dampers) MSD. It is valid for production, designing, ordering, delivery, maintenance and operation.

1. Description.........................................................................................................................

2. Design................................................................................................................................

3. Dimensions, weights...........................................................................................................

4. Placement and Assembly....................................................................................................

5. Statement of installations....................................................................................................

6. Suspension systems...........................................................................................................

7. Pressure loss......................................................................................................................

8. Coefficient of local pressure loss.........................................................................................

9. Noise data..............….………………………………….........................................................

10. Material.............................................................................................................................

11. Inspection, testing.............................................................................................................

12. Logistic terms....................................................................................................................

13. Assembly..........................................................................................................................

14. Entry into service and revisions.........................................................................................

15. Spare parts.......................................................................................................................

16. Data label.......................….…..........................................................................................

17. Ordering key.....................................................................................................................

Multi smoke dampers are shutters in the smoke exhaust duct systems. The dampers are designed to remove

heat and combustible products (e.g. smoke) from effected fire compartments. In the event of fire the Smoke

and Fire ventilation system opens the damper in the affected section and removes combustion products and

heat from this section.

The damper blade is controlled by electrical actuating mechanism.

Dampers are fire resistant and are intended for systems with automatic activation.

Dampers can be installed in construction of the fire compartment.

Basic types of dampers square:

• MSD Cycling test with load (possible design .44, .54, .65 and .66)

• MSD-W Cycling test without load (possible design .44, .54, .66, .4M0, .4M1, .5M0 and .5M1)

Basic types of dampers round:

• MSD Cycling test with load (possible design .44, .54 and .66)

• MSD-W Cycling test without load (possible design .4M0, .4M1, .5M0 and .5M1)

Dampers MSD can be open against flow and pressure.

Dampers MSD-W has to be open with the help of flow or without flow present.

Damper characteristics

• CE certified acc. to EN 12101-8

• Tested in accordance with EN 1366-10

• Classified acc. to EN 13501-4+A1

• Fire resistance according Tab. 1.2.1. and 1.2.2.

• External casing leakage class min. C acc. to EN 1751

• Internal leakage: round dampers - class min. 2, diameters from 560 mm to 630 mm min. class 3 acc. to EN 1751

square dampers - class min. 2, for max. dimension 1500 x 800 mm min. class 3 acc. to EN 1751

• Cycling test: MSD square dampers - Cmod acc. to EN 12101-8

MSD, MSD-W round dampers - C10000 acc. to EN 12101-8

MSD-W square dampers - C10000 acc. to EN 12101-8 (tested without load acc. to EN 1366-10)

• ES Certificate of conformity No. 1391-CPR-2021/0084 for MSD

• ES Certificate of conformity No. 1391-CPR-2021/0012 for MSD-W

• Declaration of Perfomance No. PM/MSD/01/21/2, PM/MSD-W/01/21/1

• Hygienic assessment of fire dampers - Report No. 1.6/pos/19/19c

Porous concrete ceiling construction, th. 150 mm

Porous concrete wall construction, th. 100 mm

Gypsum wall EI 120, th. min 125 mm

Porous concrete ceiling construction, th. 150 mm

Porous concrete wall construction, th. 100 mm

Gypsum wall EI 120, th. min 125 mm

Working conditions

Exact damper function is provided under the following conditions:

a) maximum air velocity 15 m/s

b) underpressure max. -1500 Pa or overpressure max. 500 Pa.

Dampers can be installed in arbitrary position (horizontal or vertical blade axis).

Dampers are designed for macroclimatic areas with mild climate according to EN 60 721-3-3.

Temperature in the place of installation is permitted to range from - 30°C to + 50°C.

Design with actuating mechanism

Belimo actuators are used for dampers, series BEN, BEE, BE for 230V AC resp. 24 V AC/DC,

Schischek InMax 50.75-S actuators (universal 24V or 230V supply) are used for large size of

dampers.

After connection to the power supply voltage, the actuator moves the damper blade to the

"OPEN" position or "CLOSED" (according to the corresponding connection, see wiring diagram).

If the power supply is interrupted, the actuator stops at the current position. The signalling of the

"OPEN" and "CLOSED" damper blade positions is ensured by two built-in fixed “potential-free”

end- limit switches.

The actuator for operating the damper blade can be mounted in an insulated cover/box. It is

accessible after removing the cover lid. The electrical connection of the actuator is made with a

non-flammable cable (or a cable located in the adjoining cable duct), which passes through an

opening made in the wall of the insulated cover/box when installing the damper or when

connecting the actuator power cable. The cable entry must meet a minimum fire resistance of 30

minutes.

Belimo modulating actuators, BEN (BEE)-SR series for 24V AC/DC are specially designed for

remote control of fire dampers. The position of the damper blade is adjustable by means of control

voltage 0 (2)...10V DC.

The signalling of the "OPEN" and "CLOSED" damper blade positions is ensured by two built-in

fixed “potential-free” limit switches.

The actuator for operating the damper blade is mounted in an insulated cover/box. It is accessible

after removing the cover lid. The electrical connection of the actuator is made with non-flammable

cables (or cables located in the adjoining cable duct), which pass through an opening made in the

wall of the insulated cover when installing the damper or when connecting the power cables of

the actuator. The cable entry must meet a minimum fire resistance of 30 minutes.

only for square MSD

Power voltage AC/DC 24 V

50/60Hz

AC/DC 24 V

50/60Hz

AC 230 V

50/60Hz

Power consumption - in operation

- in the end position

3 W

0,1 W

3 W

0,3 W

4 W

0,4 W

Dimensioning 6 VA (Imax 8,2 A @ 5 ms) 6,5 VA (Imax 8.2 A @ 5 ms) 7 VA (Imax 4 A @ 5 ms)

Protection class III III II

Degree of protection IP 54

Adjustment time for 95° < 30 s

Ambient temperature

Storage temperature

-30°C … +55°C

-40°C … +80°C

Connection - drive

- auxiliary switch

Cable 1 m, 3 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

(BEN 24-ST) with plug

connectors

Cable 1 m, 4 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

Cable 1 m, 3 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

S2S1 S3 S5S4 S6

<5° <80°

S2S1 S3 S5S4 S6

<5° <80°

N L1

S2S1 S3 S5S4 S6

<5° <80°

DC (0)2...10 V

DC 2...10 V

S2S1 S3 S5S4 S6

<5° <80°

S2S1 S3 S5S4 S6

<5° <80°

N L1

S2S1 S3 S5S4 S6

<5° <80°

DC (0)2...10 V

DC 2...10 V

only for square MSD

Power voltage AC/DC 24 V

50/60Hz

AC/DC 24 V

50/60Hz

AC 230 V

50/60Hz

Power consumption - in operation

- in the end position

2,5 W

0,1 W

3 W

0,3 W

3,5 W

0,4 W

Dimensioning 5 VA (Imax 8,2 A @ 5 ms) 5,5 VA (Imax 8.2 A @ 5 ms) 6 VA (Imax 4 A @ 5 ms)

Protection class III III II

Degree of protection IP 54

Adjustment time for 95° < 60 s

Ambient temperature

Storage temperature

-30°C … +55°C

-40°C … +80°C

Connection - drive

- auxiliary switch

Cable 1 m, 3 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

(BEE 24-ST) with plug

connectors

Cable 1 m, 4 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

Cable 1 m, 3 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

S2S1 S3 S5S4 S6

<3° <87°

S2S1 S3 S5S4 S6

<3° <87°

N L1

Power voltage AC/DC 24 V

50/60Hz

AC 230 V

50/60Hz

Power consumption - in operation

- in the end position

12 W

0,5 W

8 W

0,5 W

Dimensioning 18 VA (Imax 8,2 A @ 5 ms) 15 VA (Imax 7,9 A @ 5 ms)

Protection class III II

Degree of protection IP 54

Adjustment time for 95° < 60 s

Ambient temperature

Storage temperature

-30°C … +50°C

-40°C … +80°C

Connection - drive

- auxiliary switch

Cable 1 m, 3 x 0,75 mm2

Cable 1 m, 6 x 0,75 mm2

(BE 24-ST) with plug connectors

Nominal voltage 24-240 VAC/DC

50/60Hz

Power consumption - motoring

- heating

10 W

16 W (start at -20°C)

Protection class I

Degree of protection IP 66

Running time for 95° < 60 s

Ambient temperature range

Non-operating temperature

-40°C … +50°C

-40°C … +70°C

Connecting Cable 1 m, 0,5 mm2

BKNE 230-24

Actuating mechanism

Design with the communication and supply device BKNE 230-24

Design with communication and power supply device BKNE 230-24 and with actuator BEN (BEE,

BE)-ST for 24V.

The BKNE 230-24 serves on the one hand as a decentralized network device for powering the

actuator and on the other hand transmits the signal of the communication and control device

BKSE 24-6.

It simplifies electrical installation and connection of dampers. In the meantime, it facilitates

“on-site inspection” and allows central control and inspection of dampers using a simple 2-wire

line.

The BKNE 230-24 transmits the "OPEN" / "CLOSED" damper position (switches in the actuator)

and fault messages to the BKSE 24-6. It also receives commands from the control device and

controls the adjustment of the actuator to the desired position. The last control command will be

retained even after a temporary network failure..

The BKNE 230-24 controls the switching position of the actuator, its adjustment time and the data

exchange with the BKSE 24-6. In addition, it controls the actuator current (actuator connection)

and the power supply.

To simplify the connection, the actuator is equipped with plug connectors that plug directly into

the BKNE 230-24.

The actuator, communication and power supply device BKNE 230-24 can be mounted in an

insulated cover, they are accessible after removing the cover. The electrical connection of the

actuator and the BKNE 230-24 communication and power supply device is made with a non-

flammable cable (or a cable located in an adjoining cable duct), the two-wire BKNE 230-24 cable

should be connected to terminals 6 and 7. It is also recommended to use cable, which is used for

fire signalling network. The cables pass through an opening made in the wall of the insulated

cover when installing the damper or when connecting the actuator power cable. The cable entry

must meet a minimum fire resistance of 30 minutes.

For more information on actuators and devices, see the Belimo catalogue.

This variant is not available for dampers with Schischek InMax 50.75-S actuator.

AC 230 V

Power voltage AC 230V 50/60Hz

Power consumption 10 W (including actuator)

Dimensioning 19 VA (including actuator)

Protection class II

Ambient operation temperature

Storage temperature

-30°C … +50°C

-40°C … +80°C

Connection - network

- drive

- terminal blocks

cable 1 m without plug

6-pin plug, 3-pin plug

screw terminals for 2x1.5 mm2 conductor

yellow flashing damper rotates to the open position

yellow lit-up damper is open

green flashing damper rotates to the closed position

green lit-up damper is closed

yellow or green flashes twice as often fault

yellow + green dark network outage

1 to 5 should not be

connected

two-wire line to

BKSE 24-6

Communication and supply device

Andere Handbücher für MSD

Inhaltsverzeichnis

Andere Mandik Feuer- und Rauchklappe Handbücher

Mandik

Mandik SEDS-R Bedienungsanleitung

Mandik

Mandik SEDM-L Bedienungsanleitung

Mandik

Mandik FDMC Bedienungsanleitung

Mandik

Mandik FDMR Bedienungsanleitung

Mandik

Mandik VCDM Handbuch

Mandik

Mandik FDMB Bedienungsanleitung

Mandik

Mandik SEDS Bedienungsanleitung

Mandik

Mandik SEDS-L Bedienungsanleitung

Mandik

Mandik MSD Leitfaden

Mandik

Mandik SEDM Bedienungsanleitung

Mandik

Mandik FDMD Bedienungsanleitung

Mandik

Mandik SEDS-L Leitfaden

Mandik

Mandik FDMA-PM Bedienungsanleitung

Mandik

Mandik NKTM Bedienungsanleitung

Mandik

Mandik FDMB Bedienungsanleitung

Mandik

Mandik FDMC Bedienungsanleitung

Mandik

Mandik MSD Bedienungsanleitung

Mandik

Mandik SEDS-L Bedienungsanleitung

Mandik

Mandik FDMA-PM Bedienungsanleitung

Mandik

Mandik FDMC Konfigurationshandbuch

Mandik

Mandik FDMD Bedienungsanleitung

Mandik

Mandik FDMQ 120 Leitfaden

Mandik

Mandik FDMQ Bedienungsanleitung

Mandik

Mandik FDMA Bedienungsanleitung

Beliebte Feuer- und Rauchklappe Handbücher anderer Marken

HVC

HVC NCA 700 Series Bedienungsanleitung

Wildeboer

Wildeboer FR90 Bedienungsanleitung

FläktGroup

FläktGroup ETCE Programmierhandbuch

Tamco

Tamco 1000 SM Series Bedienungsanleitung

Greenheck

Greenheck Vektor-MD Bedienungsanleitung

Lindab

Lindab FBC2 Installations- und Betriebshandbuch

EKOVENT

EKOVENT EKO-SRB1 Montageanleitung

Greenheck

Greenheck HBS Series Handbuch

Advanced Air

Advanced Air 0160 Series Bedienungsanleitung

Greenheck

Greenheck CRD-1WT Bedienungsanleitung

Swegon

Swegon Actionair CSS Series Bedienungsanleitung

TAKACHIHO

TAKACHIHO FYN-M 1 Series Bedienungsanleitung

Valmet

Valmet Flowrox Expulse Series Handbuch

ETS NORD

ETS NORD NORDfire FDMB Bedienungsanleitung

AMS

AMS CR2 Bedienungsanleitung

Arzel

Arzel RegiDamper Bedienungsanleitung

mercor

mercor mcr S-THERM C Bedienungsanleitung

Greenheck

Greenheck FD Series Betriebsanleitung