Page 2of 34
INTRODUCTION
WARNING: Disconnect power from electrical source before
performing this procedure.
Please read and familiarize yourself with these instructions in their entirety before proceeding. The
procedure below shows the step by step instructions to convert a Dixie-Narco Beverage Max Vender
(DN55## and DN35## Series) to an Entray Vender. These instructions do not apply to any models other
than the DN5500 Series (e.g. DN2145, DN2054). The Beverage Max series is an all drink (can and bottle)
machine, while the Entray is a combination snack and drink machine. The Entray shelves may replace
drink shelves in only shelf locations A, B, and C; and must start with shelf location A and progress to B and
C (top to bottom) if less than 3 Entray shelves are to be used.
TOOLS NEEDED
•1/4” Socket Wrench
•Philips Screw Driver
•Scissors
•EPROM Puller
•Static Discharge Strap
ORDER
Note: Kits do not include helix. Please order helix as needed.
Part Description Part # Part Description Part #
28 Count Right Hand 801,701,35x.x1 10 Count Right Hand 801,701,39x.x1
28 Count Left Hand 801,701,36x.x1 10 Count Left Hand 801,701,41x.x1
20 Count Right Hand 801,701,48x.x1 9Count Right Hand 801,701,42x.x1
20 Count Left Hand 801,701,49x.x1 9Count Left Hand 801,701,43x.x1
17 Count Right Hand 801,701,26x.x1 8Count Right Hand 801,701,44x.x1
17 Count Left Hand 801,701,27x.x1 8Count Left Hand 801,701,45x.x1
13 Count Right Hand 801,701,37x.x1 7Count Right Hand 801,701,31x.x1
13 Count Left Hand 801,701,38x.x1 7Count Left Hand 801,701,32x.x1
11 Count Right Hand 801,701,28x.x1 6Count Right Hand 801,701,46x.x1
11 Count Left Hand 801,701,29x.x1 6Count Left Hand 801,701,47x.x1
PART DESCRIPTION DN55## KIT DN35## KIT
Tray Assembly 5 Column 5 –11 645,010,00x.x4 NA
Tray Assembly 5 Column 5 –11 No Vend Sensor Kit 645,010,20x.x4 NA
Tray Assembly 3Column 3 -11 NA 645,010,10x.x4
Tray Assembly 3Column 3 –11 No Vend Sensor Kit NA 645,010,30x.x4
