PREPARATION FOR ASSEMBLY
The Reformer must be installed and used in an environment conducive to Pilates
practice. The following characteristics must be respected in the equipment
installation area:
•
Proper leveling and floor stability;
•
Low humidity;
•
Protection against sunlight.
TOOLS AND FASTENERS FOR ASSEMBLY
For your comfort, Metalife provides all the tools
and fasteners needed to assemble your
equipment.
Keep them for future maintenance or
component replacement.
During assembly, the guidelines contained in this manual must be
properly followed. The Equipment is subject to damage during this
process, so be careful when dealing with components and tools.
Damage caused by failure to comply with the instructions in this
manual is the responsibility of the client.
If you have any questions or difficulties, please contact Metalife
Technical Assistance.
Following the instructions contained in
this manual, it is estimated that the
complete assembly of your Metalife
Reformer will take 60 minutes.
02 people are needed to
assemble the equipment.
