Metrohm 900 Touch Control Betriebsanleitung
900 Touch Control
Tutorial
8.900.8010EN
Metrohm AG
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
www.metrohm.com
900 Touch Control
Tutorial
8.900.8010EN 01.2019
Technical Communication
Metrohm AG
CH-9100 Herisau
This documentation is protected by copyright. All rights reserved.
This documentation has been prepared with great care. However, errors
can never be entirely ruled out. Please send comments regarding possible
errors to the address above.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents
900 Touch Control ￭￭￭￭￭￭￭￭ III
Table of contents
1 Introduction 1
1.1 Structure of the tutorial ....................................................... 1
1.2 Symbols and conventions .................................................... 1
2 Setup and configuration 3
2.1 Setting up the instruments .................................................. 3
2.2 Configuring ............................................................................ 5
2.2.1 Switching the instrument on and off ........................................ 5
2.2.2 Switching off the instrument .................................................... 6
2.2.3 Display elements and controls .................................................. 6
2.2.4 Setting the dialog language ..................................................... 8
2.2.5 Configuring a new titrant ........................................................ 9
2.2.6 Defining the report output ..................................................... 12
3 Carrying out simple titrations 14
3.1 Creating a titration method ............................................... 14
3.2 Entering user name and sample data ............................... 23
3.3 Carrying out the determination ........................................ 25
3.3.1 Preparing the titration ............................................................ 25
3.3.2 Carrying out the titration ....................................................... 26
3.3.3 Displaying the results ............................................................. 27
3.3.4 Recalculating the determination ............................................. 28
3.3.5 Printing a report manually ...................................................... 30
4 Carrying out an extended titration 31
4.1 Statistics function ............................................................... 31
4.2 Saving the determination and the PC/LIMS report ......... 32
4.3 Modifying the titration parameters .................................. 34
4.4 Saving a method ................................................................. 37
4.5 Creating a sample table ..................................................... 37
4.6 Carrying out titrations ........................................................ 40
4.7 Displaying statistics data ................................................... 41
5 Setting up the user administration 42
5.1 Creating a user list .............................................................. 42
5.2 Automatic login with USB flash drive ............................... 44
5.3 Login with password .......................................................... 46
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
900 Touch Control ￭￭￭￭￭￭￭￭ 1
1 Introduction
The present tutorial helps you to get acquainted with the operation of the
900 Touch Control. You will be guided step by step through the most
important dialog pages by using a simple pH titration as an example.
Thereby you will learn how to efficiently operate and use the 900 Touch
Control.
1.1 Structure of the tutorial
￭Setup
Preparing the titration system.
￭Basics – simple acid-base titration
Loading and carrying out methods, displaying results.
￭Additional functions – creating methods, statistics etc.
Optimizing titration parameters, calculating statistics, efficiently using
the sample table.
￭User administration
User list, login with USB flash drive or password.
Detailed information on the functioning and operation of the Titrando sys-
tem can be found in the online help and the corresponding manuals:
￭Manual for the Titrando
￭Manual for the 900 Touch Control
￭Manual for the exchange unit
￭Manual for the 800 Dosino or the dosing unit
1.2 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item
[Next] Button or key
1.2 Symbols and conventions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2￭￭￭￭￭￭￭￭ 900 Touch Control
WARNING
This symbol draws attention to a possible life-threat-
ening hazard or risk of injury.
WARNING
This symbol draws attention to a possible hazard due
to electrical current.
WARNING
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.
WARNING
This symbol draws attention to a possible biological
hazard.
CAUTION
This symbol draws attention to possible damage to
instruments or instrument parts.
NOTE
This symbol highlights additional information and
tips.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Setup and configuration
900 Touch Control ￭￭￭￭￭￭￭￭ 3
2 Setup and configuration
2.1 Setting up the instruments
What you will need:
￭A 900 Touch Control
￭A Titrando with internal dosing drive and an 806 Exchange Unit
or
A Titrando without internal dosing drive, with an 800 Dosino and an
807 Dosing Unit
￭A magnetic stirrer (801 Stirrer), an 803 Ti Stand or an 804 Ti Stand with
propeller stirrer (802 Stirrer)
￭Some sample vessels
￭A pH electrode with connection cable
￭Possibly an additional 805 Dosimat with an exchange unit (e.g. 20 mL)
or
Possibly an additional 800 Dosino (dosing drive) with a dosing unit (e.g.
20 mL)
￭A bottle with titrant (e.g. caustic soda c(NaOH)=0.1 mol/L)
￭Possibly a printer with connecting cable
￭Possibly a balance with connecting cable
￭Deionized water (carbonate-free)
The manual for the Titrando describes in detail how to install the accesso-
ries. A few notes about this:
Titrant
During this tutorial you will carry out simple titrations. Select an acid or
base as titrant.
Sensor
Use a pH glass electrode for the acid-base titration. Do not forget to plug
the electrode cable into the connector Ind. on the rear of the instrument.
Stirrer
Connect the magnetic stirrer (801 Stirrer) on the rear of the instrument
to the connector MSB 1.
Printer
Select a printer with a USB connector. Use a commercially available USB
cable to connect the printer.
2.1 Setting up the instruments ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4￭￭￭￭￭￭￭￭ 900 Touch Control
Balance
If you connect a balance to the 900 Touch Control, you can transfer the
sample size per push-button from the balance to the titrator.
800 Dosino
In case you would like to automatically add an auxiliary solution to the
sample before the titration, you will also need a Dosino. Connect it to the
connector MSB 2 on the Titrando.
Samples and sample vessels
You can use sample beakers of any size. Use an acid or base as sample,
which can be titrated with the selected titrant.
Please note that the stirrer has to be connected to the connector MSB 1
of the Titrando for the following example methods. If you use a Titrando
without internal dosing drive, then you must connect the external dosing
device (here: Dosino) to the MSB connector of the stirrer. This way it will
be controlled like an internal dosing drive of the Titrando, i.e. as dosing
device 1.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Metrohm Laborausrüstung Handbücher
Metrohm
Metrohm 930 Compact IC Flex SeS Bedienungsanleitung
Metrohm
Metrohm 930 Compact IC Flex Bedienungsanleitung
Metrohm
Metrohm 872 Bedienungsanleitung
Metrohm
Metrohm 838 Advanced Sample Processor Bedienungsanleitung
Metrohm
Metrohm 858 Bedienungsanleitung
Metrohm
Metrohm Eco KF Titrator Bedienungsanleitung
Metrohm
Metrohm 882 Compact IC plus Bedienungsanleitung
Metrohm
Metrohm 945 Professional Detector Vario - Conductivity &... Bedienungsanleitung
Metrohm
Metrohm Autolab RDE2 Bedienungsanleitung
Metrohm
Metrohm OMNIS Titrator Bedienungsanleitung
Metrohm
Metrohm 916 Ti-Touch Bedienungsanleitung
Metrohm
Metrohm 761 SD Compact IC Bedienungsanleitung
Metrohm
Metrohm 940 Professional IC Vario ONE/LPG Bedienungsanleitung
Metrohm
Metrohm Eco Titrator Bedienungsanleitung
Metrohm
Metrohm 763 PVC Thermomat Bedienungsanleitung
Metrohm
Metrohm 700 Dosino Bedienungsanleitung
Metrohm
Metrohm 798 MPT Titrino Bedienungsanleitung
Metrohm
Metrohm 774 Bedienungsanleitung
Metrohm
Metrohm 799 GPT Titrino Bedienungsanleitung
Metrohm
Metrohm 863 Bedienungsanleitung
Beliebte Laborausrüstung Handbücher anderer Marken
Agilent Technologies
Agilent Technologies 5800 ICP-OES Bedienungsanleitung
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Bedienungsanleitung
NI
NI PXI-5422 Handbuch
Collomix
Collomix Aqix Bedienungsanleitung
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung
Ocean Insight
Ocean Insight FLAME-NIR+ Bedienungsanleitung
Parker
Parker ALIGN-MG-NA Bedienungsanleitung
BD
BD 644787 Bedienungsanleitung
DENTAURUM
DENTAURUM Compact Megaplus Bedienungsanleitung
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 Bedienungsanleitung
VWR
VWR SAS Super IAQ Bedienungsanleitung
illumina
illumina MiSeqDx Bedienungsanleitung