Metronic Zapbox DVR-01 Bedienungsanleitung
Digital Video Recorder
MET804
Ref. 441858
Z a p b o x DVR-01
3
Before installing your DVR-01 Digital video recorder it is important that you
read and understand the instructions completely.
To ensure that you are covered to receive Freeview coverage please text
your postcode to 83331 (standard network charges apply)
or visit : www.freeview.co.uk
Remember that contact with 230V AC mains can be lethal or can cause
severe electric shock. To avoid this risk :
• Neverremovethetopcoverofthereceiver.Therearenouser-
serviceable parts inside it, but there are some high-voltage live parts.
• Neverattempttorepairyourreceiver.Pleasecontactyourretailer.
• Makesureallelectricalconnectorsareproperlymade.
• Donotplaceyourreceiverclosetosourcesofheat,suchasheater
or direct sunlight.
• Donotputanythingonyourreceiverwhichmightdriporspillontoit.
• Neverplacetheproductnearobjectsfilledwithwater.
• Donotusealiquidformtocleanyourreceiverorremote.Adrycloth
will be sufficient.
If you come across a word that you do not understand, please refer to the
Glossary at the end of this manual.
TheremoterequirestwoAAA1.5Vbatteries.Ensuretheyareplacedcorrectly.
Please do not dispose of used batteries in your domestic bins.You should
bring them back to your point of sale and place them in the right container.
WARNING-IMPORTANT
This symbol indicates that the
product must not be treated as
household waste. The harmfull
substances possibly contained in
the equipment may have
negative consequences on the environment
and / or the human health. At the end of its
life, bring any electronic equipment back to
your retailer or at the collection point that
your city or town puts at your disposal.
4
Programming the receiver is achieved through the various menus.
In order to make this manual easier to understand, we will describe
accessing a menu as shown below :
GotoMENU/SETUP/SERVICE SETUP/xxxx/MANUAL SCAN.
This means :
• PresstheMENUkeytoaccessthemainmenu.
• Pressthe6arrow to select Setup.
• PressOKtoconfirm.
• Pressthe6arrow to select Service Setup.
• PressOKtoconfirm.
• Enterthe4digitPINcode(0000onpurchase).
• Pressthe6 arrow to select Manual Scan and confirm by
pressingOK.
5
INDEX
1 Installation 06
2 Remote description 10
3 Receiver description 12
4 Daily use 13
5 Personalisingthechannelslisting 13
6 Parentallock 15
7 Resetting the receiver 16
8AdjustingtheTVsignal 17
9 Radios 17
10 Channel Search 17
11 Digital Video Recorder 18
A -Time-shift 18
B - live recording 19
C - Scheduled recording 19
D-Playback 20
E-Programmsmanagement 20
F-TransferringProgramstoaVCR/DVDRecorder 21
12 TV guide 22
13 What to do if you experience a reception problem 23
14 Glossary 25
15 Universalremotecontrol 25
16 Multiplexes - channels 26
17 Channels list 27
Assistance and advice 31
6
1 - Installation
A - Simplified installation
As the receiverisnotyetpluggedintothemainsource(throughthe230/12V
adapter),connecttheantennadirectlytotheANTinputofthereceiver. Loop the
tuners with the small coaxial cable provided as depicted in the below picture.
Connect the TV to the TV scart outlet of the receiver. Switch on the TV and
connect the receiver to the main source. Insert the batteries in the remote.
PresstheswitchontherearpanelontheONposition.
Screened cable. Replace in case of poor reception by
ahighqualitycable.
By connecting the TV and the receiver, you will keep the analogue
channels on your TV. This cable is not mandatory .
A
A
B
B
7
A red indicator appears on the
receiver. Press the ON/OFF
key of the remote. The indicator
switches OFF and a language
menu appears on the screen.
If this is not the case, you
should double-check the scart
connectionsandorforcetheA/V
or EXT mode of your TV (refer
to the TV manual). Press OK to
start the installation.
The automatic channels lookup
should start. At the end, the first
channel will appear, meaning the
standard installation is done.
At the bottom of the screen, an
estimation of the remaining time
is displayed. Allow one or two
minutes for the receiver gives a
reliable estimation.
If the search has not found all channels (or none), this probably means that
you need to improve the installation (see next paragraph). If no channels
are found after you have done so, this probably means that you area
is not covered by Freeview.
8
B - Wedging / adjusting the aerial
If no channels have been found through your current antenna, it means
that it probably is pointing towards an analogue only transmitter. If your area
is covered by digital, it means that the programs are coming from another
transmitter.Youwillhencehavetoadjusttheantenna.Therearetwopossible
options, as follows :
Option1
You know at least one network number (between 21 and 69) used
in your area.
• GotoMenu/Setup/Service Setup
/xxxx /Manual Scan.
• Pressthe4 arrow until the number
oftheUHFnetworkthatemitsdigital
channels appears.
• On TxMode, select 2k with
the 4arrow.
• OnGuard Interval , select 1/32 with
the 4arrow.
• Waitforafewsecondsandmonitor
the Quality and Level graphs.
• Swivel the antenna to maximise
reception. When you get near the emitter, the Signal Level should increase,
and then the Quality. 6 is the lowest number for a stable image. If the Level
does not increase, this means that you have chosen an incorrect network
number, or that the emission is too far from your antenna.
• OnceyouhavereachedthemaximumLevel / Quality, screw the antenna
tightly.
• PressEXIT.
• GotoMenu/Setup/Service Setup/xxxx /Fullscan Replace Existing
Services.
9
Option2
Youareabletoreceivenationalchannelsinanalogueandyouhavenoidea
whatyoucanreceiveindigitalquality.
If you are certain that you can receive additional channels, but you do
not know which network is used for these channels, we advise that
you do the following :
Find an UHF antenna with high gain (at least 15 dB) and connect it to
the ANT input of the receiver. Adjust the antenna so it is in the same
position as the previous one and start an automatic channels search
(Go to Menu / Setup/Service Setup/xxxx /Fullscan Replace Existing
Services).
If you find channels that you were unable to receive with your previous antenna,
simplyreplaceitwiththenewone.Otherwise,swiveltheantenna1/8ofaturnand
start another automatic search. As long as you do not find any channels, continue
thesameprocessuntilyoufindmorechannels.Youshouldendupreceivingatleast
a few channels.
• Findoneofthenewchannelsreceived.
• GotoMenu/Setup/Service Setup/xxxx /Manual Scan.
• Atthebottomofthescreen,youcanviewthereceptionlevel and quality.
• Turn the antenna to optimise the quality and level (quality must be
at least 6).
• Screwtheantennatightly.
• PressMenu to go back to the previous menu.
• Makeanautomaticsearch(GotoMenu/Setup/Service Setup/xxxx /
Fullscan Replace Existing Services).
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
