MICRO-EPSILON InertialSENSOR INC5701 Bedienungsanleitung

Pin Assignment

Connect the open cable end in accordance with

the color coding.

Pin 1Color 2Description

45 °

Fig. 4 View of

solder pin side,

8-pin, A-coded,

female

connector

1 White Voltage output (angle)

2 Brown GND (current output)

3 Green Current output (angle)

4 Yellow RS485+

5 Gray GND

(signal voltage output)

6Black/

pink GND (Supply)

7 Blue RS485-

8 Red Supply+ 3

1) - SA - Connector

2) PCx/8-M12 Power supply and output cable, see

operating instructions, Chap. A 1.

3) 5 - 32 VDC

MICRO-EPSILON MESSTECHNIK GmbH & Co. KG

Königbacher Straße 15

94496 Ortenburg / Germany

Tel. +49 (0) 8542 / 168-0 / Fax +49 (0)8542 / 168-90

e-mail [email protected]

www.micro-epsilon.com

X9771391-A011089HDR

Current and Voltage Output

The sensor makes the angular value available as ana-

log output variable either as current or voltage value on

separate pins, depending on the configuration of the

sensor using the software tool of Micro-Epsilon.

Further Information

For further information about the system read the

operating instructions. You will find this online at:

www.micro-epsilon.de/download/manuals/

man--inertialSENSOR-INC5701--en.pdf.

Decommissioning, Disposal

Remove the power and output cable from the

sensor.

Incorrect disposal may cause harm to the environment.

Dispose of the device, its components and ac-

cessories, as well as the packaging materials in

compliance with the applicable country-specific

waste treatment and disposal regulations of the

region of use.

Assembly Instructions

inertialSENSOR

INC5701

Warnings

Connect the power supply and the display/output

device according to the safety regulations for electrical

equipment.

> Risk of injury

> Damage to or destruction of the sensor

The supply voltage must not exceed the specified limits.

> Damage to or destruction of the sensor

No sharp or heavy objects should be allowed to affect

the cables. Avoid folding the cables. Do not bend more

tightly than the minimum bending radius of the cables.

> Damage or destruction of the cable, failure of the

measuring device

Do not crush the cable. Protect the sensor cable against

damage.

> Damage or destruction of the cable, failure of the

measuring device, data loss

Ensure that the coupling nuts of the connectors are

firmly tightened.

> Damage or destruction of the cable, failure of the

measuring device

Notes on the CE Marking

The following apply to the inertialSENSOR INC5701:

EU Directive 2014/30/EU

EU Directive 2011/65/EU

The sensor fulfills the specification of the EMC require-

ments, if the instructions in the operating instructions

are followed.

Proper Environment

- Protection class: 1IP 67

- Operating temperature: -40 ... +85 °C (-40 ... 185 °F)

- Storage temperature: -40 ... +85 °C (-40 ... +185 °F)

- Ambient pressure: Atmospheric pressure

1) With M12 connector

Installation and Assembly

For cable assembly, please observe the Chapter

Warnings.

The sensor is fixed with two M4 screws. After the sen-

sor has been attached to the component, the position

of rest (angular value = 0°) is freely adjustable with the

software tool of Micro Epsilon.

From the position of rest the sensor measures an angle

of up to 180 ° in each direction of rotation (clockwise

and counterclockwise). The measurement range is

shown in Figure below, see Fig. 1.

To ensure most precise measurement the sensor

should be positioned without tilting as shown,

see Fig. 2.

Fig. 1 Measurement range ±180 °

Fig. 2 Standard mounting position with most precise

measurement without tilting of the sensor

12 (.47)

53 (2.09)

5.5 (.22)

12 (.47) 76 (2.99)

12.5 (.49)

6 (.24)

24 (.94)

26.5 (1.04)

Mounting holes

for M4 screws

Fig. 3 Dimensional drawing, dimensions in mm

(inches), not to scale

Andere MICRO-EPSILON Zubehör Handbücher

MICRO-EPSILON

MICRO-EPSILON optoCONTROL CLS-K-10 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON colorSENSOR LT-1-ST Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT 1220 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON capaNCDT 6110 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON capaNCDT 6100 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON induSENSOR DTD Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON surfaceCONTROL 2500 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON capaNCDT 6114 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON wireSENSOR WDS Series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON ILD2200-2 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT ILR2250 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT 2300 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON thermoMETER CSmicro Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT 2300 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON turboSPEED DZ140 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON eddyNCDT 3060 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON thermoMETER CTVideo Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON WireSensor Series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT ILR 102 series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON WPS Series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON thermoMETER CSmicro SF Series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON eddyNCDT 3060 Installationsanleitung

MICRO-EPSILON

MICRO-EPSILON induSENSOR EDS Series Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoNCDT 1220 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

MICRO-EPSILON inertialSENSOR INC5701 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken