MikroTik Chateau 5G Bedienungsanleitung
Chateau 5G
Chateau 5G ( ).
D53G-5HacD2HnD-TC&RG502Q-EA
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
Exposure to Radio Frequency Radiation:This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the
general public.
Quickstart
Please follow these quick steps to set up your device:
Connect an external antennas to the SMA connector (The antennas are provided in the package, see " ");Antenna usage
Insert micro SIM card into the slot located under the device;
Connect your computer to one of the Ethernet ports;
Connect the power adapter to the DC jack;
Once the device is powered on and PC connected to the device, open in your https://192.168.88.1
web browser to start the configuration;
User name: a and there is no password by default you will be logged in automatically to the
dmin
Quick Set screen;
We recommend clicking the "Check for updates" button on the right side and updating your
RouterOS software to the latest version to ensure the best performance and stability, Must have a
valid SIM card inserted;
To manually update the device, please go to https://mikrotik.com/download
Choose ARM packages for this device and download them to your PC.
Upload downloaded packages to the WebFig "Files" menu and reboot the device.
Updating your RouterOS software to the latest version will ensure the best performance, stability,
and security updates.
To personalize your wireless network, SSID can be changed in the fields "Network Name";
Choose your country on the left side of the screen in the field "Country", to apply country regulation
settings;
Set up your wireless network password in the field "WiFi Password" the password must be at least
eight symbols;
Set up your router password in the bottom field "Password" to the right and repeat it in the field
"Confirm Password", it will be used to log in next time;
Click on the "Apply Configuration" to save changes.
Connecting with a mobile app
Use your smartphone to access your router through WiFi.
Insert the SIM card and power on the device.
Scan QR code with your smartphone and choose your preferred OS.
Connect to the wireless network. SSID starts with MikroTik and has the last digits of the device's MAC address.
Open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.
Expansion slots and ports
1.
2.
3.
4.
5.
6.
7.
8.
Reset button.
Powering DC jack 2.0 mm.
Five Gigabit ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for
connecting to other network devices.
USB type-A.
SIM slot for Micro sim card.
Mode button.
Cover for external is not provided for models with antennas.SMA antenna connector
WPS Sync button.
Integrated Wireless module operating at 2.4 GHz, 802.11b/g/n protocol. Antenna gain 3 (dBi).
Integrated Wireless module operating at 5 GHz, 802.11a/n/ac protocol. Antenna gain 5.5 (dBi).
Mounting
The device is designed to be used indoors, by placing it on the desktop.
Powering
The device accepts power from an adapter:
Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) 12-28 V DC.
The power consumption under maximum load can reach 17 W, with attachments of 23 W.
Configuration
We recommend using Cat5 shielded cable. When using and installing this device please pay attention to the Maximum Permissible Exposure
(MPE) safety distance with a minimum of 20 cm between the radiator and your body.
1.
2.
3.
4.
We recommend checking for updates frequently to receive the latest updates for your RouterOS software to ensure the best performance and stability.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: . In case an IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC https://mt.lv/help https://mt.lv/winbox
address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see section .Buttons and Jumpers
Mode button
The mode button is located on the back of the unit, on the right side.
The Default configuration for the Mode button is dark mode - to turn off all LEDs. The button can be configured in RouterOS to run any user-specified
scripts.
Sync button
The sync button is located on the top of the unit. WPS Sync button, if configured on the wireless interface, can be used to connect new clients.
Press and hold the WPS button for 1 – 5 seconds to enable WPS for wireless interfaces.
Front LED status
Wireless network activity.
Ethernet port activity.
System LED.
5G signal strength.
SIM slot usage
Cellular connection technology based on the System LED color:
Red: GSM
Yellow: 3G
Blue: LTE
Green: 5G NSA
Violet: 5G SA
Led not blinking: Not registered
SIM card slot is designed to use with Micro SIM cards.
Nano SIM cards have different thicknesses, usage with an adapter is not recommended.
Reset button
The reset button has three functions:
Hold this button during boot time until the LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
The package includes the following accessories that come with the device:
ADAPT1_ EU/US Switching Power Supply 24V, 1.2A.
CAB3_ CAT5E UTP Flat Cable, 8P8C, AWG32, 1.5m.
ANT8-9_ external LTE antenna.
Antenna usage
Switch off the device before connecting the antennas, otherwise, the device may be damaged!
External antenna sockets are located on the back of the device.
Screw both antennas to the SMA sockets (Follow the instructions in the illustrations).
Netinstall
When performing Netinstall, make sure to use the latest v7 version of both ROS files and the Netinstall software.
Removing back cover to access PCB
In case there is a need to access PCB, the back cover can be removed.
Remove center screw;
Use a small screwdriver to pry open backplate in marked spots;
Continue to pry it open by going up;
At the end lift off the whole backplate.
Operating system support
The device supports RouterOS software version v7. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
UKCA marking
Eurasian Conformity Mark
Частотный диапазон Мощность передатчика
2400-2483.5 МГц, 5150-5350 МГц, 5650-5850МГц ≤100 мВт
*Доступные частотные каналы могут различаться в зависимости от модели продукта и сертификации.
Информация о дате изготовления устройства указана в конце серийного номера на его наклейке через дробь. Первая цифра означает номер
года (последняя цифра года), две последующие означают номер недели.
Изготовитель: Mikrotikls SIA, Aizkraukles iela 23, Riga, LV-1006, Латвия, [email protected]. Сделано в Китае, Латвии или Литве. Cм. на
упаковке.
Для получения подробных сведений о гарантийном обслуживании обратитесь к продавцу. Информация об импортерах продукции MikroTik в
Российскую Федерацию: https://mikrotik.com/buy/europe/russia
Продукты MikroTik, которые поставляются в Евразийский таможенный союз, оцениваются с учетом соответствующих требований и помечены
знаком EAC, как показано ниже:
Norma Oficial Mexicana
Rango de frecuencia (potencia de salida máxima): 2400-2483.5 MHz (30 dBm), Los canales de frecuencia disponibles pueden 5725-5850 MHz (30 dBm).
variar según el modelo y la certificación del producto.
EFICIENCIA ENERGETICA CUMPLE CON LA NOM-029-ENER-2017.
La operacion de este equipo esta sujeta a las siguientes dos condiciones:
Es posible que este equipo o dispositivo no cause interferencia perjudicial y.
Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.
Fabricante: Mikrotikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia.
País De Origen: Letonia; Lituania; China (Republica Popular); Estados Unidos De America; Mexico.
Por favor contacte a su distribuidor local para preguntas regionales específicas. La lista de importadores se puede encontrar en nuestra página de inicio –
.https://mikrotik.com/buy/latinamerica/mexico
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.
The National Commission for the State Regulation of Communications and
Informatization by Ukraine
Виробник: Mikrotikls SIA, Brivibas gatve 214i Рига, Латвія, LV1039.
Робоча частота (Максимальна вихідна потужність): 2480-2483.5 МГц (20 дБм), 5150-5250 МГц (23 дБм), 5250-5350 МГц (20 дБм), 5470-5725 МГц
(27 дБм).
CE Declaration of Conformity
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
Hereby, Mikrotīkls SIA declares that the radio equipment type D53G-5HacD2HnD-TC&RG502Q-EA is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products
WLAN / WCDMA / LTE / 5G
Operating Frequency / Maximum output power
Betriebsfrequenz / maximale Ausgangsleistung
Fréquence de fonctionnement / puissance de sortie maximale
WLAN 2.4 Ghz 2400-2483.5 MHz / 20 dBm
WLAN 5Ghz 5150-5250 MHz / 23 dBm
WLAN 5Ghz 5250-5350 MHz / 20 dBm
WLAN 5Ghz 5470-5725 MHz / 27 dBm
WCDMA Band I 1922.4 MHz / 23dBm ± 2.7 dB
WCDMA Band III 1712.4 MHz / 23dBm ± 2.7 dB
WCDMA Band V 826.4 MHz / 23dBm ± 2.7 dB
WCDMA Band VIII 882.4 MHz / 23dBm ± 2.7 dB
LTE Band 1 2100 MHz / 23dBm ± 2.7 dB
LTE Band 3 1700 MHz / 23dBm ± 2.7 dB
LTE Band 5 850 MHz / 23dBm ± 2.7 dB
LTE Band 7 2600 MHz / 23dBm ± 2.7 dB
LTE Band 8 900 MHz / 23dBm ± 2.7 dB
LTE Band 20 800 MHz / 23dBm ± 2.7 dB
LTE Band 28 700 MHz / 23dBm ± 2.7 dB
LTE Band 32 1500 MHz / 23dBm ± 2.7 dB
LTE Band 34 2000 MHz / 23dBm ± 2.7 dB
Справжнім Mikrotikls SIA заявляє, що маршрутизатор відповідає основним вимогам та іншим відповідним положенням директиви 2014
/53/EC, а також суттєвим вимогам Технічного регламенту радіообладнання, затвердженого постановою Кабінету Міністрів України від
24 травня 2017 року № 355.
Для експлуатації в Україні необхідно отримати дозвіл на експлуатацію у порядку, затвердженому рішенням НКРЗІ від 01.11.2012 № 559,
зареєстрованому в Міністерстві юстиції України 03.01.2013 за № 57/22589.
Frequenza operativa / massima potenza di uscita
Frecuencia de funcionamiento / potencia de salida máxima
Рабочая частота / максимальная выходная мощность
LTE Band 38 2600 MHz / 23, 26dBm ± 2.7 dB
LTE Band 40 2300 MHz / 23, 26dBm ± 2.7 dB
LTE Band 41 2500 MHz / 23, 26dBm ± 2.7 dB
LTE Band 42 3500 MHz / 23, 26dBm ± 3 dB
LTE Band 43 3700 MHz / 23dBm ± 3 dB
5G NR Band n1 2100 MHz / 23dBm ± 2 dB
5G NR Band n3 1800 MHz / 23dBm ± 2 dB
5G NR Band n7 2600 MHz / 23dBm ± 2 dB
5G NR Band n8 900 MHz / 23dBm ± 2 dB
5G NR Band n20 800 MHz / 23dBm ± 2 dB
5G NR Band n28 700 MHz / 23dBm ± 2 dB
5G NR Band n38 2600 MHz / 23dBm ± 2 dB
5G NR Band n40 2300 MHz / 23dBm ± 2 dB
5G NR Band n41 2500 MHz / 26dBm ± 2 dB
5G NR Band n77 3700 MHz / 26dBm ± 2 dB
5G NR Band n78 3500 MHz / 26dBm ± 2 dB
This MikroTik device meets Maximum transmit power limits per ETSI regulations. For more detailed information see Declaration of Conformity
above / Dieses MikroTik-Gerät erfüllt die maximalen Sendeleistung Grenzwerte gemäß ETSI-Vorschriften. Weitere Informationen finden Sie
oben in der Konformitätserklärung / Cet appareil MikroTik respecte les limites de puissance de transmission maximale conformément aux
réglementations ETSI. Pour plus d'informations, voir la déclaration de conformité ci-dessus / Questo dispositivo MikroTik è conforme ai limiti di
potenza massima di trasmissione in conformità con le normative ETSI. Per ulteriori informazioni, consultare la dichiarazione di conformità sopra
/ Este dispositivo MikroTik cumple con los valores límite de potencia máxima de transmisión de acuerdo con la normativa ETSI. Para obtener
información más detallada, consulte la Declaración de conformidad anterior / Это устройство MikroTik соответствует предельным
значениям максимальной мощности передачи в соответствии с правилами ETSI. Для получения более подробной информации см.
Декларацию соответствия выше.
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. /
Die WLAN-Funktion dieses Geräts ist nur für die Verwendung in Innenräumen im Frequenzbereich 5150 bis 5350 MHz
beschränkt. / La fonction WLAN de cet appareil est limitée à une utilisation en intérieur uniquement lorsqu'il fonctionne dans la
gamme de fréquences 5150 à 5350 MHz. / La funzione WLAN per questo dispositivo è limitata all'uso interno solo quando si
opera nella gamma di frequenza da 5150 a 5350 MHz. / La función WLAN para este dispositivo está restringida al uso en
interiores solo cuando se opera en el rango de frecuencia de 5150 a 5350 MHz. / Функция WLAN для этого устройства ограничена
использованием внутри помещения только при работе в диапазоне частот от 5150 до 5350 МГц.
Note. The information contained here is subject to change. Please visit the product page on
www.mikrotik.com for the most up to date version of
this document.
Andere Handbücher für Chateau 5G
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere MikroTik Drahtloser Zugangspunkt Handbücher
MikroTik
MikroTik wAP series Bedienungsanleitung
MikroTik
MikroTik hAP ac lite TC Bedienungsanleitung
MikroTik
MikroTik Audience LTE6 kit Bedienungsanleitung
MikroTik
MikroTik RBGroove52HPn Bedienungsanleitung
MikroTik
MikroTik wAP LR2 kit Bedienungsanleitung
MikroTik
MikroTik wAP ac Series Bedienungsanleitung
MikroTik
MikroTik RouterBOARD wAP R Bedienungsanleitung
MikroTik
MikroTik RBLtAP-2HnD&R11e-LTE&R11e-LR8 Bedienungsanleitung
MikroTik
MikroTik LtAP Bedienungsanleitung
MikroTik
MikroTik LtAP LR8 LTE kit Bedienungsanleitung
MikroTik
MikroTik wAP LR8 Series Bedienungsanleitung
MikroTik
MikroTik RouterBOARD SXT G-5HnD Bedienungsanleitung
MikroTik
MikroTik CRS109-8G-1S-2HnD-IN Bedienungsanleitung
MikroTik
MikroTik Cube Lite60 Series Bedienungsanleitung
MikroTik
MikroTik RB912R-2nD-LTm Bedienungsanleitung
MikroTik
MikroTik NetMetal ac2 Series Bedienungsanleitung
MikroTik
MikroTik wAP ac RBwAPG-5HacD2HnD Bedienungsanleitung
MikroTik
MikroTik RouterBOARD Groove 5Hn Bedienungsanleitung
MikroTik
MikroTik cAP Leitfaden
MikroTik
MikroTik Audience Bedienungsanleitung
Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung
Ubiquiti
Ubiquiti NanoStation NSM2 Bedienungsanleitung
Cisco
Cisco Aironet 1550 Series Bedienungsanleitung
Aruba
Aruba IAP-335 Bedienungsanleitung
Advantek Networks
Advantek Networks AWN-AP-54MR Bedienungsanleitung
IP-COM
IP-COM AP355 Bedienungsanleitung
Buffalo
Buffalo AirStation WLA-L11G Bedienungsanleitung
EnGenius
EnGenius EnStationACv2 Bedienungsanleitung
D-Link
D-Link DAP-3662 Bedienungsanleitung
xG Technology
xG Technology xMax CN1300 Bedienungsanleitung
Widelink
Widelink ezWave WAP-1100 Series Bedienungsanleitung
Edimax
Edimax CAP1200 Bedienungsanleitung
