MiLAN MIL-S3570 Bedienungsanleitung

MIL-S3570

24-Port Fast Ethernet Switch

with Gigabit Uplinks

INSTALLATION GUIDE

TECHNOLOGY

Regulatory Approval

- FCC Class A

- UL 1950

- CSA C22.2 No. 950

- EN60950

- CE

- EN55022 Class A

- EN55024

Canadian EMI Notice

This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

European Notice

Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the

Commission of the European Community Compliance with these directives imply conformity to the following European Norms:

- EN55022 (CISPR 22) - Radio Frequency Interference

- EN61000-X - Electromagnetic Immunity

- EN60950 (IEC950) - Product Safety

Trademarks

trademarks of Digi International, Inc. in the United States and/or other countries. All other

trademarks are the property of their respective holders.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information ready:

- Product serial number and revision

- Date of purchase

- Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [email protected]

Telephone: +1.408.744.2751

Fax: +1.408.744.2771

MiLAN Technology

1299 Orleans Drive

Sunnyvale, CA 94089-1138

United States of America

Telephone: +1.408.744.2775

Fax: +1.408.744.2793

http://www.milan.com

info @ milan.com

Five-Year Limited Warranty

MiLAN Technology warrants to the original consumer or purchaser that each of it's products, and

all components thereof, will be free from defects in material and/or workmanship for a

period of five years from the original factory shipment date. Any warranty hereunder is

extended to theoriginal consumer or purchaser and is not assignable.

MiLAN Technology makes no express or implied warranties including, but not limited to, any

implied warranty of merchantability or fitness for a particular purpose, except as expressly set

forth in this warranty. In no event shall MiLAN Technology be liable for incidental or

consequential damages, costs, or expenses arising out of or in connection with the

performance of the product delivered hereunder. MiLAN Technology will in no case cover

damages arising out of the product being used in a negligent fashion or manner.

Table of Contents

1. Introduction 1

1.1 Features 2

1.2 Specifications 3

2. Installing the Switch 4

2.1 Packing List 4

2.2 Panels 4

2.3 Mounting the Switches 5

3. Making Network Connections 6

3.1 Network Switched Ports 6

3.2 10/100BASE-TX Fast Ethernet Ports 7

3.3 Gigabit Ethernet Slots 9

3.4 Making Trunk Connections 11

3.5 Virtual LAN (VLAN) 13

4. LED Indicators 14

4.1 LED Panels 14

4.2 Interpretation 14

5. Performing Network Management 15

5.1 Management Support 15

5.2 Management Objects 16

5.3 Setting IP Address 17

5.3.1 Console Management 17

5.3.2 Console Login 17

5.4 Web Management 18

5.5 Telnet Management 18

5.6 SNMP and RMON Management 18

5.7 Software Upgrade 18

5.8 Support 19

1. Introduction

Driven by recent advances in desktop computing technology, today’s network applications have increased

in speed, power and the ability to process information. To meet the demands of these more bandwidth-

intensive applications, this switch device provides significant increase in performance for your Ethernet

and Fast Ethernet network. The switch comes with 24 10/100 Fast Ethernet switched ports,

each capable of transferring information simultaneously at full wire speed to control and allocate the net

work bandwidth. It also provides two optional Gigabit Ethernet slots for Gigabit access.

The key features of the switch units are:

• High Port-count and High Bandwidth:

Combining large number of 10/100Mbps based Fast Ethernet switched ports and two Gigabit ports, the

switches deliver a tremendous aggregated bandwidth for your network.

• Easy Migration:

With 10BASE-T, 100BASE-TX, 1000BASE-X support, the switch provides a

non-disruptive and smooth migration path from Ethernet to Fast Ethernet, and to Gigabit

Ethernet network.

• Easy Installation:

With the functions of auto-speed-sensing and auto-negotiation on each port, the switches support plug-

and-play installation by default which eliminates configuration problems.

• Network Management:

With the built-in SNMP and web management software agent, the switch

provides network management function for advanced applications. It allows you to control and monitor

the switch remotely from anywhere in the network.

1.1 Features

Designed for resolving congestion problems caused by bandwidth-hungry devices and bandwidth-intensive

applications as well as a high number of users, the switches not only adhere to the IEEE 802.3 10BASE-T,

IEEE 802.3u 100BASE-TX, and IEEE 802.3z 1000BASE-X standards, but also feature:

• High port-count of 10/100BASE-TX auto-negotiation switched ports for flexible connections to desk

top PCs, servers and hubs.

• The 10/100BASE-TX switched ports support:

- auto speed sensing for 100Mbps or 10Mbps connection

- auto configuration with auto-negotiation devices

• Two 1000Mbps Gigabit switched port slots support:

- 1000BASE-SX Gigabit switched module

• Spanning tree

• Self learning for network configuration

• Store and forward switching to ensure only good packets are forwarded

• Full-duplex or half-duplex operation support for all switched ports

• Forwarding and filtering at full wire speed

• Supports IEEE 802.3x flow control for full-duplex operation

• Supports back-pressure flow control for half-duplex operation

• Supports IEEE 802.1d spanning tree protocol

• Supports port-based and 802.1q tagged VLAN

• Supports trunking function up to 4 ports

• Supports Web-based and SNMP management

• Full diagnostic LED indicators to indicate the power and port status

• 19-inch rack mountable

Management Features:

• Telnet for remote control

• Provides one RS232 local console port

• 802.1D Bridging

- 802.1d spanning tree

- 802.1P/Q GARP/GVRP

• Routing - RIP, RIP-2, DHCP-relay, ICMP router discovery message

• IP Multicast

- IGMP Snooping

- IP Multicast packet filtering

• TFTP - software upgrade capability

•Web-based management

•SNMP management

- SNMP agent RFC 1155-1157

- MIB-II, Bridge MIB (RFC 1286), private MIB

- VLAN MIB (802.1Q)

- RMON MIB (RFC 1757) -static, history, alarm, event

- IGMP MIB 2

1.2 Specifications

Standard IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX

IEEE 802.3z 1000BASE-X

IEEE 802.3ad Port trunking

IEEE 802.3x Full duplex flow control

IEEE 802.1D Spanning tree

IEEE 802.1Q Tagged VLAN

IEEE 802.1P/Q GARP/GVRP

Network ports 24 10/100BASE-TX switched ports

2 Gigabit switched slots for optional Gigabit module

Console port 1 DB9 Male connector

Cables 10BASE-T Cat. 3, 5 UTP cable (100 meters max.)

100BASE-TX Cat. 5 UTP cable (100 meters max.)

1000BASE-X Multimode fiber

Unit LED Power status

TP Port LED Link/Activity, Speed, Duplex/Collision status per port

Filtering rate 14,880 pps for Ethernet (10BASE-T)

148.8 Kpps for Fast Ethernet (100BASE-TX)

1.488 Mpps for Gigabit ports (1000BASE-X)

Forwarding rate 14,880 pps for Ethernet (10BASE-T)

148.8 Kpps for Fast Ethernet (100BASE-TX)

1.488 Mpps for Gigabit ports (1000BASE-X)

Filtering address Multicast/Broadcast/Unicast address

MAC addresses 12K entries

RAM buffer 2MBytes for Port 1-12 and Giga-slot1

2MBytes for Port 13-24 and Giga-slot2

Environment Temperature 0ºC to 40ºC

Relative humidity 10% to 90% non-condensing

Power Universal power supply 100-240VAC, 50/60Hz, 65W

2. Installing the Switch

The switch is designed to operate in workgroup environments without a complicated

configuration procedure. It also features an auto-select 100-240V, 50/60Hz power supply unit, which

works in most countries around the world.

Before connecting the supplied power cord into the switch, check to see that the cord voltage

and current rating conform to the standards of the country of operation.

2.1 Packing List

• One switch unit

• One AC power cord

• One RS232 console cable

• 19-inch rack mount kit

• CD for installation guide, software modules, MIB file and software operation manuals

2.2 Panels

The following figure illustrates the major components on front and rear panels:

10/100 Port 1-12 10BASE-T/100BASE-TX Port #1 - #12

10/100 Port 13-24 10BASE-T/100BASE-TX Port #13 - #24

Gigabit Slot1 Gigabit Slot #1 for 1000BASE-FX module series

Gigabit Slot2 Gigabit Slot #2 for 1000BASE-FX module series

LED indicators LED display for power and all port status

AC power switch Switch to turn on or off the power to the unit

AC power socket Plug-in socket for AC power cord

Console port Connector for local console management connection

2.3 Mounting the Switches

Desktop Mounting

The switches can be placed on a desktop as a stand-alone unit. Allow enough ventilation

space between the switch and the objects around it.

Desktop Mounting

Rack Mounting

For mounting the switch into a 19-inch rack, a pair of mounting brackets is included in the pack.

Install Rack Mount Brackets

Install the switch into a 19-inch rack as illustrated in the following figure:

Install the Switch into a 19-inch Rack

3. Making Network Connections

3.1 Network Switched Ports

The following figure illustrates the switched ports provided on the front panel. The switch comes with 24

10/100BASE-TX Fast Ethernet switched ports and two Gigabit Ethernet slots for Gigabit Ethernet modules.

The following table lists the connectors provided on each network ports:

Port # Standard Connector type Mark

Port 1 10/100BASE-TX MDI-X RJ-45 1X

Port 2 10/100BASE-TX MDI-X RJ-45 2X

10/100BASE-TX MDI RJ-45 2

Port 3-24 10/100BASE-TX MDI-X RJ-45 3X - 24X

Gigabit slot1 1000BASE-FX Slot GIGABIT1

Gigabit slot2 1000BASE-FX Slot GIGABIT2

• 10/100BASE-TX Fast Ethernet Switched Ports

Each switched port supports one connection to a LAN segments. Each segment is an independent shared

network in one collision-domain. The connection can be to either a 10BASE-T or a 100BASE-TX device.

• MDI-X and MDI RJ-45 Connectors

MDI-X jack is labeled [X] normally to indicate the jack is designed with internal crossover function. It

allows a connection to an end station using straight-through UTP cable. MDI RJ-45 connector is provided

on port for easy uplink via standard straight-through UTP to other device that supports MDI-X RJ-45

connector. The following table shows the pin assignments of MDI-X and MDI RJ-45 connector respec-

tively:

PIN# MDI-X Jacks MDI Jack

1Rx+ Tx+

2Rx- Tx-

3Tx+ Rx+

6Tx- Rx-

4,5,7,8 NC NC

• Gigabit Ethernet Slots

Two Gigabit Ethernet slots are provided for Gigabit connections. Each can accommodate one Gigabit

Ethernet module. A variety of optional modules is available for selection. Refer to section 3.3 for more

information. 6

3.2 10/100BASE-TX Fast Ethernet Ports

The switch can support connections to the following devices:

• 10BASE-T or 10/100BASE-TX network cards

• 10BASE-T hub ports

• 100BASE-TX hub ports

• 10/100BASE-TX dual speed hub ports

• 10/100BASE-TX switch ports

Auto-negotiation Capable

The ports support auto-negotiation function when establishing a link connection with any

auto-negotiation capable device. The connection speed and duplex mode are determined through

the negotiation process with the connected device.

Auto-speed-sensing

When connecting to a non-auto-negotiation device, half duplex mode is used. However, the ports can

auto-detect the connection speed.

Manual Configuration

The ports are configured to be enabled for auto-negotiation as factory default. However, it also

can be changed to one of the following fixed configurations through network

management operation:

• 10M Half-duplex

• 10M Full-duplex

• 100M Half-duplex

• 100M Full-duplex

Trunking Function

The ports are configured as normal data ports instead of trunking ports as factory default. In order to

support trunking function, any port can be configured as a trunking port manually through network

management operation. As configured, it is no longer a data port. For more details about trunking, refer to

section 3.4.

Flow Control

Half-duplex mode uses back pressure flow control to prevent the receiving buffer from being overrun by

data from a source node. Full-duplex mode uses the 802.3X flow control standard to prevent fast Physical

Ports data traffic from overrunning slow data traffic.

Inhaltsverzeichnis

Andere MiLAN Schalten Handbücher

MiLAN

MiLAN MIL-S8001TG Bedienungsanleitung

MiLAN

MiLAN MIL-S24000T Bedienungsanleitung

MiLAN

MiLAN MIL-S500 Bedienungsanleitung

MiLAN

MiLAN MIL-SM24T4DPA Programmierhandbuch

MiLAN

MiLAN MIL-SM800P Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401MAF Bedienungsanleitung

MiLAN

MiLAN MIL-L800i Bedienungsanleitung

MiLAN

MiLAN MIL-SM808G Bedienungsanleitung

MiLAN

MiLAN MIL-SM8002TG Bedienungsanleitung

MiLAN

MiLAN MIL-S3580 Bedienungsanleitung

MiLAN

MiLAN MIL-SM4804G Bedienungsanleitung

MiLAN

MiLAN MIL-S800 Bedienungsanleitung

MiLAN

MiLAN MIL-S800I Bedienungsanleitung

MiLAN

MiLAN MicroHub LE MIL-4000H Bedienungsanleitung

MiLAN

MiLAN MIL-SM801P Bedienungsanleitung

MiLAN

MiLAN MIL-SM801XX Bedienungsanleitung

MiLAN

MiLAN MIL-S1600 Bedienungsanleitung

MiLAN

MiLAN MIL-SME801GSX Bedienungsanleitung

MiLAN

MiLAN MIL-SM801 Bedienungsanleitung

MiLAN

MiLAN MIL-S8TA Bedienungsanleitung

MiLAN

MiLAN MIL-S16002TG Series Bedienungsanleitung

MiLAN

MiLAN MIL-H1120 Bedienungsanleitung

MiLAN

MiLAN MIL-SM802GAF Bedienungsanleitung

MiLAN

MiLAN MIL-S801XX Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung