MiLAN MIL-H1120 Bedienungsanleitung

Installation Guide

MIL-H1120 4-Port

Ethernet SOHO Hub

MIL-H1130 8-Port

Ethernet SOHO Hub

Introduction

The MIL-H1100 family of small SOHO Ethernet

hubs brings unmatched flexibility to LAN

environments. These hubs provide your network

with multiple wiring connections for up to 4 or 8

unshielded twisted pair (UTP) ports.

These hubs constantly monitor each port for signal

quality and will automatically disconnect a device

producing noise or excessive collisions. The device

will automatically be reconnected when the error

condition is cleared. Data packets which exceed the

maximum legal length for IEEE802.3 Ethernet

packets are automatically truncated. This prevents a

device from blocking the network by transmitting a

continuous data stream or extra long packet. The

hubs completely retime and restore full-amplitude

waveforms for each retransmitted packet. A full-

length preamble is also generated, insuring packet

integrity across the network. Compact, light and

robust, the 4- or 8-port hub provides the ideal

solution for your small, medium, or large 10Base-T

LAN environment. Now you can truly take

advantage of 10Base-T in your network, and your

installation will be an easy task.

Before going any further, examine the package and

make sure that you have all of the items listed

below:

·4- or 8-port Ethernet hub

·Installation Guide

·Power adapter

If you are missing any of these items, contact your

dealer immediately.

Features

·Comply with IEEE802.3

·4 or 8 fully-shielded RJ-45 10Base-T ports

·A slide switch for the 1st port cascading

· Power LED, collision LED, and link/activity LED's

·Automatic partitioning of the faulty ports

·External power supply

·FCC Class A, CE Class A, VCCI Class A

·UL/CUL, TUV

Description

The 4- or 8-port hub is easy to install and requires

no special training. You should, however, read the

following instructions carefully before proceeding

with the installation. Figure 1 and Figure 2 show

the layout of the front panel and rear panel of the

4- or 8-port hub.

Caution:

Before you begin the installation, check the AC

power line voltage used in your area. The AC

power adapter that was included with your hub

should match the power supply voltage used in

your area. Using an AC power adapter with an

incorrect AC voltage may damage your hub.

AC input power: equal to the AC power voltage

used in your area.

DC output power: 7.5 V @ 500 mA (4-port)

7.5 V @ 700 mA (8-port)

Figure 2. 8-Port Hub: Front Panel and Rear Panel

Figure 1. 4-Port Hub: Front Panel and Rear Panel

10Base-T Station to Hub Connection

Use the following procedure to connect a 10Base-T

Ethernet station to the hub.

·Make sure that the hub's slide switch is selected

to NORMAL mode for the 1st port.

·Connect one end of the cable to the 1st port of

the hub and the other end to the station, as shown

in Figure 3.

Interconnecting Hubs

Note the following when interconnecting two or

more hubs:

·Make sure that the primary hub's switch is set to

UPLINK mode for the 1st port and the secondary

hub's switch is set to NORMAL mode.

·Connect one end of the cable to the 1st port of

the hub and the other end to another hub, as

shown in Figure 4a and Figure 4b.

Figure 3. Connecting to Station

LED Indicators

Figure 5 shows the LED indicators, which indicate

the link status of each of the ports, whether the

hub is receiving power and whether there is

network activity.

Figure 4a. Interconnecting to Hubs

Figure 4b. Interconnecting to Hubs

Specifications

Standards

IEEE802.3 10Base-T

Network Interface and Cable Specifications

RJ-45 ports for use with 10Base-T cabling

Maximum Segment Lengths

10Base-T (UTP) 100 meters maximum

Indicators

Power LED

Collision LED

Link/activity per port

Physical Dimensions

4-port hub: 100.5 mm x 78 mm x 27 mm

8-port hub: 153 mm x 78 mm x 27 mm

Environment

Operating temperature: 0°C to +40°C

Storage: -20°C to +70°C

LED

Power

Collision

Link/activity

COLOR

Green

Amber

Green

STATUS

DESCRIPTION

Power is on

Collision is detected

The 10 Mbps

link pulse is

detected

There is activity

on the segment

Green Flashing

The table below lists the status and descriptions of

the LED's.

Humidity: operating, 10% to 90% RH

External Power Adapter Voltage/frequency:

Input: 120 VAC @ 60 Hz or 230 VAC @ 50 Hz

Output: 7.5 VDC @ 500 mA (4-port)

7.5 VDC @ 700 mA (8-port)

Five-year Limited Warranty

MiLAN Technology warrants to the original consumer or

purchaser that each of its products and all components

thereof, will be free from defects in material and/or

workmanship for a period of five years from the original

factory shipment date. Any warranty hereunder is

extended to the original consumer or purchaser and is not

assignable.

MiLAN Technology makes no express or implied

warranties including, but not limited to, any implied

warranty of merchantability or fitness for a particular

purpose, except as expressly set forth in this warranty. In

no event shall MiLAN Technology be liable for incidental

or consequential damages, costs, or expenses arising out

of or in connection with the performance of the product

delivered hereunder. MiLAN Technology will in no case

cover damages arising out of the product being used in a

negligent fashion or manner.

Trademarks

Technology are either trademarks or registered

trademarks of Digi International, Inc. in the United

States and/or other countries. All other Trademarks are

the property of their respective holders.

To Contact MiLANTechnology

For prompt response when calling for service

information, have the following information ready:

·Product serial number and rev

·Date of purchase

·Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [email protected]

Telephone: +1.408.744.2751

Fax: +1.408.744.2771

MiLAN Technology

1299 Orleans Drive

Sunnyvale, CA 94089-1138

United States of America

Telephone: +1.408.744.2775

Fax: -1.408.744.2793

http://www.milan.com

[email protected]

P/N 90000140 Rev C

Dieses Handbuch passt für folgende Modelle

Andere MiLAN Schalten Handbücher

MiLAN

MiLAN MIL-S16000T Bedienungsanleitung

MiLAN

MiLAN TR-TP-HB-1600 Bedienungsanleitung

MiLAN

MiLAN MIL-S8000T Bedienungsanleitung

MiLAN

MiLAN MIL-S16002TG Series Bedienungsanleitung

MiLAN

MiLAN MIL-SM808G Bedienungsanleitung

MiLAN

MiLAN MIL-SM800 Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

MiLAN

MiLAN MIL-SM801P Bedienungsanleitung

MiLAN

MiLAN MIL-L800i Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401MAF Bedienungsanleitung

MiLAN

MiLAN MIL-S500 Bedienungsanleitung

MiLAN

MiLAN MIL-SM802GAF Bedienungsanleitung

MiLAN

MiLAN MIL-S5000T Bedienungsanleitung

MiLAN

MiLAN MIL-S24002TGXX Bedienungsanleitung

MiLAN

MiLAN MIL-SM8002TG Bedienungsanleitung

MiLAN

MiLAN MIL-S801XX Bedienungsanleitung

MiLAN

MiLAN MIL-S800 Bedienungsanleitung

MiLAN

MiLAN MIL-S1600 Bedienungsanleitung

MiLAN

MiLAN MIL-SM24T4DPA Programmierhandbuch

MiLAN

MiLAN MIL-S800I Bedienungsanleitung

MiLAN

MiLAN MIL-SM800P Bedienungsanleitung

MiLAN

MiLAN MIL-SME801P Bedienungsanleitung

MiLAN

MiLAN MIL-SM4004TG Bedienungsanleitung

MiLAN

MiLAN MIL-SM24004TG Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung