Milwaukee SMS510 Bedienungsanleitung

Milwaukee

USER MANUAL

PORTABLE

ORP METER

MODEL: SMS510

Smart Monitoring System

ISMIL510 12/01

Milwaukee

SPECIFICATIONS:

SMS510

RANGE ±1000 mV

RESOLUTION 1 mV

ACCURACY (@25°C) ±5 mV

SETPOINT 0 to 600 mV

ALARM active when the measure is

lower than setpoint

OUTPUT POWER SOCKET active when the measure is

lower than setpoint

ORP ELECTRODE MA921B/2 (included)

ENVIRONMENT 0 to 50°C, 95% RH max.

POWER SUPPLY 12 VDC (included)

POWER DRIVERS 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz

DIMENSIONS 160 x 80 x 40 mm

WEIGHT 220 g (meter only)

OPTIONAL ACCESSORIES:

MA921B/2 ORP Electrode with BNC connector and 2m cable

M10000B Electrode rinse solution, 20 mL sachet (25 pcs)

MA9015 Electrode storage solution, 220 mL bottle

MA950 Portable meter wall fixing kit

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

The electrode is warranted for a period of 6 months.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our office and the repair will be effected free of

charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

OPERATION:

• Connect the supplied 12 VDC

power adapter to the meter

and to the mains.

• Connect the ORP electrode

to the BNC socket on the

bottom of the meter.

• Always remove the electrode

protective cap before taking

any measurement. If the elec-

trode has been left dry, soak

the tip (bottom 2.5 cm) in

rinse solution (M10000B) for

a few minutes to reactivate it.

• Turn the instrument on by

pressing the ON/OFF key.

• Allow the reading to stabilize

and the meter will start con-

tinuous monitoring.

• The meter is factory calibrated.

• A blinking alarm will indicate when the measured ORP

value is lower than the setpoint.

NOTE:

• The power contact is not protected by fuse inside the

meter. It is recommended to protect it outside, against

failure.

• WARNING: when the alarm led is blinking, the mains

voltage is present in the output power socket.

SETPOINT:

• The setpoint can be selected

by adjusting the central front

knob to the desired value.

• The selectable range for

SMS510 is from 0 to 600 mV.

INSTALLATION PROCEDURE:

Andere Milwaukee Messgerät Handbücher

Milwaukee

Milwaukee MC310 Bedienungsanleitung

Milwaukee

Milwaukee MA871 Bedienungsanleitung

Milwaukee

Milwaukee HEAVY DUTY 7,5 m LED Tape Measure Bedienungsanleitung

Milwaukee

Milwaukee REDLITHIUM Bedienungsanleitung

Milwaukee

Milwaukee MW105 MAX Bedienungsanleitung

Milwaukee

Milwaukee M12 3622-20 Bedienungsanleitung

Milwaukee

Milwaukee PST MW12 Bedienungsanleitung

Milwaukee

Milwaukee MW100 Bedienungsanleitung

Milwaukee

Milwaukee PRO MI414 Bedienungsanleitung

Milwaukee

Milwaukee PH55 Bedienungsanleitung

Milwaukee

Milwaukee PRO Lux MW700 Bedienungsanleitung

Milwaukee

Milwaukee REDLITHIUM L4 CLL, REDLITHIUM L4 CPL Bedienungsanleitung

Milwaukee

Milwaukee MW11 Bedienungsanleitung

Milwaukee

Milwaukee MI404 Bedienungsanleitung

Milwaukee

Milwaukee 3421 Bedienungsanleitung

Milwaukee

Milwaukee MAX MW160 Bedienungsanleitung

Milwaukee

Milwaukee M12 CLLP-301C Bedienungsanleitung

Milwaukee

Milwaukee 2309-60 Bedienungsanleitung

Milwaukee

Milwaukee MI 405 Bedienungsanleitung

Milwaukee

Milwaukee M12 3632-20 Bedienungsanleitung

Milwaukee

Milwaukee pH600 Bedienungsanleitung

Milwaukee

Milwaukee MA887 Bedienungsanleitung

Milwaukee

Milwaukee M12 AL Bedienungsanleitung

Milwaukee

Milwaukee 2205-20 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung