MinimumRC Tigermoth Bedienungsanleitung

Tigermoth

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Fuselage internals.

2. Bond the plywood structure with CA glue.

3. Fix the landing gear steel wire with m1x3 screws.

4. Fix the motor with a tie and use 502 glue on the side for reinforcement. Please pay attention to

the position of the tie head shown in the figure.

5. Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos arms return to their neutral point. Test whether the servos are working correctly, and

install the servo arms according to the position shown in the picture.

Note: Please make sure that the servos have been tested and installed in strict accordance with

the following picture. After assembling the model, it will be not able to adjust.

6. (Bottom view) The three servos are installed and fixed under the plywood board.

7. Connect the receiver to the motor, install the propeller and test whether the rotation direction

of the motor is correct. Test whether the corresponding relationship between the three servos and

the transmitter channel is correct. After the test, fix the receiver with Velcro and tie the cables.

8. Install magnet base & magnet.

9. Fuselage parts.

10. Align the scribed line on the inner side of the fuselage and fix the wooden s tructure with glue.

11. Upper wing support base parts.

12. Install upper wing support base parts.

13. Top and bottom strip of the fuselage.

14. Fix the top and bottom strip of the fuselage with glue.

15. Install tail landing gear.

16. Bend the nose cover parts along the scribed line on the inner side.

17. Install nose cover on one side. Note: the position shown in the picture is the battery cover

plate that can be opened. No glue shall be applied to the area marked by the yellow line.

18. Fix the top and bottom strip of the nose with glue.

19. Combine nose.

20. Paste stickers and install the propeller.

21. Install the windshields.

22. Insert the copper axle core into the center of the wood wheel core.

23. Glue the tires.

24.

25. Slightly bend the landing gear steel wire forward.

26. Install the landing gear cover plate and wheels. Bend the outer end of the steel wire with

pointed nose pliers.

Inhaltsverzeichnis

Andere MinimumRC Spielzeug Handbücher

MinimumRC

MinimumRC F8F-RareBear Pro Bedienungsanleitung

MinimumRC

MinimumRC Sopwith Camel Bedienungsanleitung

MinimumRC

MinimumRC F8F-RareBear Pro Bedienungsanleitung

MinimumRC

MinimumRC T-34 Mentor Bedienungsanleitung

MinimumRC

MinimumRC LISA Bedienungsanleitung

MinimumRC

MinimumRC Cessna-152 Bedienungsanleitung

MinimumRC

MinimumRC Piper Cub J-3 Bedienungsanleitung

MinimumRC

MinimumRC Cessna L-19 Bedienungsanleitung

MinimumRC

MinimumRC F8F Rare Bear Handbuch

MinimumRC

MinimumRC Spitfire Bedienungsanleitung

MinimumRC

MinimumRC Flycat Bedienungsanleitung

MinimumRC

MinimumRC P-51 Mustang Bedienungsanleitung

MinimumRC

MinimumRC DH-88 Comet Bedienungsanleitung

MinimumRC

MinimumRC P40 Q Series Bedienungsanleitung

MinimumRC

MinimumRC J-3 Bedienungsanleitung

MinimumRC

MinimumRC T-34 Mentor Bedienungsanleitung

MinimumRC

MinimumRC Fan-Jet 600 Bedienungsanleitung

MinimumRC

MinimumRC F8F Rare Bear Handbuch

MinimumRC

MinimumRC Beech V-35 Bedienungsanleitung

MinimumRC

MinimumRC Messerschmitt BF-109 Bedienungsanleitung

MinimumRC

MinimumRC Vulcanair P-68 Bedienungsanleitung

MinimumRC

MinimumRC A6M5-Q Series Bedienungsanleitung

MinimumRC

MinimumRC ASG-32 Bedienungsanleitung

MinimumRC

MinimumRC Minimoa Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung