Minuteman Parker LV02675B Leitfaden

LV02675B

LV02675BF

LV0265H

LV0265HF

ALL PURPOSE VACUUM

OPERATION ￭SERVICE ￭PARTS ￭CARE

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .....................4

TRAINING...........................................................................4

WARNING ..........................................................................4

SAFE OPERATION..........................................................6

MAINTENANCE AND STORAGE.................................6

FUEL SAFETY ..................................................................7

MACHINE OPERATION INSTRUCTIONS...................8

WAND OPERATION ......................................................10

SAFETY DECALS ..........................................................11

BASE ASSEMBLY.........................................................12

BASE ASSEMBLY BOM...............................................13

HANDLE ASSEMBLY....................................................14

HANDLE ASSEMBLY BOM.........................................15

ENGINE ASSEMBLY – BRIGGS ................................16

ENGINE ASSEMBLY – HONDA..................................17

DELUXE ASSEMBLIES................................................18

WAND ASSEMBLY..................................................................................................... 19

WAND DIVERTER ASSEMBLY................................................................................. 20

WAND DIVERTER ASSEMBLY BOM..................................................................... 21

WAND DIVERTER CONTROL LEVER ASSY ......................................................... 22

LIMITED WARRANTY...................................................23

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING

Training

1. Read instructions carefully. Be familiar with the controls and the proper

use of the equipment.

2. Never allow children or people unfamiliar with these instructions to use

this outdoor equipment.

3. Never operate while people, especially children, or pets are nearby.

Keep bystanders at least 25 feet away from the area of operation

4. Keep in mind that the operator or user is responsible for accidents or

hazards occurring to other people or their property.

Warning

1. Under California, and under laws of several other states, you are not permitted

to operation internal combustion’s engine using hydrocarbon fuels on any forest

covered, brush covered, or grass covered land, or on land with grain, hay, or other

flammable agricultural crop, without an engine spark arrester in continuous effective

working order. The engine on your power equipment, like most outdoor power

equipment, is an internal combustion engine that burns gasoline, a hydrocarbon fuel.

Therefore, your power equipment must be equipped with a spark arrester muffler in

continuous effective working order. The spark arrester must be attached to the

engine exhaust system in such a manner that flames or heat from the system will not

ignite flammable material. Failure of the owner/operator of the equipment to comply

with this regulation is a misdemeanor under California law, and may also be a

violation of other state and/or federal regulations, laws, ordinances, or codes.

Contact your local fire marshal or forest service for specific information about what

regulations apply in your area.

2. Wear approved safety glasses when operating this equipment. The operation of

any powered machine can result in foreign objects being thrown by high-speed

rotating parts. Visually inspect the area to be cleaned to remove any objects that

may be a hazard when thrown.

3. Wear work gloves, sturdy footwear, long trousers and hearing protection when

operating this equipment. Do not use machine while barefoot or with open toed

sandals.

4. Remove hearing protection and watch for traffic when operating near, or when

crossing roadways.

5. Do not operate this equipment on a paved, gravel or hard surface unless the

collection bag is installed. Discharged material may bounce from a hard surface.

6. Before inspecting or servicing any part of equipment, shut off engine,

disconnect spark plug wire from spark plug, and make sure that all moving parts

have come to a complete stop. Be aware that rotating blades slow down gradually

after engine is shut off.

7. Before using, always inspect to see that the fan blades and fan mounting

hardware are not worn or damaged. Replace any worn or damaged parts to keep

machine safe and with good balance.

8. Never leave equipment unattended when engine is running. Shut off engine

and disconnect spark plug wire from spark plug before leaving equipment.

9. Do not vacuum any burning or smoldering materials such as cigars, cigarettes,

ashes or cinders.

10. Do not vacuum areas that have been recently treated with fertilizers, pesticides

or herbicides. Follow chemical manufacturer’s safety instructions regarding contact

with treated areas.

11. Do not vacuum flammable liquids such as gasoline, kerosene, diesel fuel, paint

thinner, etc.

12. Do not allow hands or any other part of the body or clothing inside the vacuum

inlet.

13. Before removing or installing collection bag, shut off engine, disconnect spark

plug wire from spark plug, and allow all moving parts to come to a

complete stop.

14. If equipment jams or becomes clogged, immediately shut off engine, disconnect

spark plug, and allow all moving parts to come to a complete stop. Use only a

wooden stick to clear away debris.

15. Do not start engine or operate this equipment with any safety guards or housing

removed.

16. Do not operate on terrain greater than a 20 degree grade.

Safe Operation

•Operate machine only in the daylight or in good artificial light.

•Do not run engine in an enclosed area. Engine exhaust contains carbon

monoxide gas is a deadly poison that is odorless, colorless, and tasteless. Do

not operate this equipment near buildings, windows, or air conditioners.

•Exercise extreme caution on slopes and avoid excessively steep slopes.

•Always walk, never run.

•Use extreme caution when reversing or pulling the machine towards you.

•Do not change the engine governor or over run the engine.

•Do not tilt the equipment when starting the engine or switching on the motor.

•Do not start the engine when standing in front of the discharge chute.

•Never pick up or carry machine while engine is running.

•Stop the engine:

oWhenever you leave the equipment

oBefore refueling

Maintenance and Storage

•Keep all nuts and bolts and screws tight to be sure the equipment is in safe

working condition.

•Never store the equipment with fuel in the tank inside a building where fumes

may reach an open flame or spark.

•Allow engine to cool before storing in any enclosure.

•To reduce the risk of fire, keep the engine and fuel storage area clean and free

of any grease or clumps of grass and leaves.

•Check the discharge area frequently for wear or deterioration.

•Replace worn or damaged parts for safety.

•If the fuel tank has to be drained, this should be done outdoors.

•Fuel safety

Gasoline is highly flammable and its vapors are explosive. To prevent

personal injury or property damage:

•Do not add fuel if engine is running or still hot from recent operation.

Allow engine to cool for at least three minutes.

•Store fuel in containers specifically designed for this purpose.

•Do not fill fuel tank indoors. After filling, wipe up any spills and move

away from gasoline fumes before starting engine.

•Do not allow open flame, matches, or smoking in area.

•Fill fuel tank with fresh, clean unleaded regular automotive gasoline,

(leaded regular and unleaded or leaded premium grades of gasoline

are acceptable substitutes).

•Do not mix oil with gasoline.

•Clean the area around the fuel fill cap and remove the cap from the

fuel tank. Insert a clean funnel into the fuel tank.

•Fill the tank to 1/2 inch below the bottom of the filter neck to provide

space for any fuel expansion.

•Reinstall the fuel fill cap securely and wipe up any spilled gasoline.

SAVE THESE INSTRUCTIONS

Machine Operation Instructions

Read operating instructions before operating equipment

CAUTION: The engine contains no oil. Before starting the engine,

make sure the crankcase is filled with the proper amount and type of oil.

Refer to the engine operations manual for proper lubrication of the engine.

Read the engine manual carefully before operating the unit.

Material handling

DANGER: Improper use of this equipment may result in serious injury.

•Heavy concentration of sand and gravel should be avoided. These materials

are extremely abrasive, and while the APV is designed to handle moderate

amounts of these materials it was not designed for heavy applications.

Because these materials are extremely heavy, only small amounts should be

allowed to collect in the bag because large amounts can cause poor handling

and difficulty in pushing.

•The APV will handle most common types of debris found around industrial

plants, commercial buildings, homes and farms. Acid contaminated materials,

magnesium, dust and other DANGEROUS DEBRIS that is considered

hazardous should not be handled with the APV unless approved by a

regulating authority considered to be an expert in the handling of such

materials.

Height adjustment

Simply loosen the lower 4 sided knob on the left side of the handle

weldment and then move the adjustment bracket until you achieve the

proper height that is desired. Then tighten 4-sided knob to fix the bracket

into position.

Maintenance instructions

Warning: do not work on the APV with the engine running or idling. Bring

machine and any rotating parts to a complete stop. Remove spark plug

wire before attempting to service.

1. For servicing and operating instructions for engine refer to Engine

Manufacturer’s Service Manual. Careful attention to care of air cleaner

and crankcase lubrication instructions will ensure longer engine life. KEEP

ENGINE CLEAN

2. Clean the engine air cleaner every 10 hours of operation. More often

under dusty conditions. Replace air cleaner if it is torn, punctured or

uncleanable.

3. Be sure to keep oil at the proper level in the engine. Check the oil level

each time you fill the fuel tank.

4. To drain the oil:

a. Briggs and Stratton: Twist the black body of the drain plug

extension clockwise and pull out, remove the yellow cap and let the

oil drain.

b. Honda: Remove the dipstick and tilt the machine on its side until

the oil is completely drained.

5. Dust bag care:

a. Keep bag clean at all times.

b. Clean bag by turning inside out, attaching the bag to the machine,

turn machine on and let the moving air clean the bag. Lightly tap on

the bag to help free the trapped dust and debris.

c. Do not wash the bag; this will shrink the fabric, thus reducing the

airflow.

d. Debris left inside of bag may cause spontaneous combustion,

resulting in an explosion or fire.

Wand Operation

(LV02675BF & LV0265HF models only)

Wand safety pointers:

1. Follow the operating instructions of the unit for engine speed, etc.

2. Care should be taken not to plug the hose by forcing too much debris into it at

one time.

3. Stiff debris such as sticks and tree trimmings should not be picked up with the

hose, as they may plug the hose.

4. If the hose becomes plugged, the engine must be shut off.

5. Remove hose from blower housing, remove all blockage from the hose and

replace to blower housing before restarting engine.

Wand operating

1. Remove Wand end and hose from its storage position on the vacuum.

2. Making sure the engine is either off or at an idle, shift the handle on the Door

control to the forward position. See picture 1

3. Pick up the Wand and use the vacuum to clean up following the Wand Safety

Pointers above.

4. If the hose becomes plugged, first straighten out the hose to allow debris to

travel down easier.

5. If the plugging situation still persists, shut off the engine and remove the hose

from the blower housing by unscrewing the lock on the hose end adapter and

removing the hose. Shake out the debris from the hose or use a stick to

remove the debris.

6. Reinstall the hose end adapter, restart the engine and start using the Wand

again.

7. To replace the Wand and hose on the vacuum, first turn the engine off or at

idle. Move the Door control handle to its rearward position until it catches.

8. Replace the hose in its carry position on the vacuum with the Wand end

installed as in picture

Lever Position during Normal Operation. Lever Position during Wand use.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Minuteman Staubsauger Handbücher

Minuteman

Minuteman C29486-02 Leitfaden

Minuteman

Minuteman 724 Leitfaden

Minuteman

Minuteman Tsunami T16WD Stücklistenhandbuch

Minuteman

Minuteman X839 Asbestos Series Stücklistenhandbuch

Minuteman

Minuteman C82904-07 Leitfaden

Minuteman

Minuteman Phenom L1518 Bedienungsanleitung

Minuteman

Minuteman C47185-00 Bedienungsanleitung

Minuteman

Minuteman C80704-05 SS Leitfaden

Minuteman

Minuteman C37115-13 Bedienungsanleitung

Minuteman

Minuteman X705 Bedienungsanleitung

Minuteman

Minuteman C80704-01 SS Leitfaden

Minuteman

Minuteman C84790-00 Leitfaden

Minuteman

Minuteman MX-1000 Series Leitfaden

Minuteman

Minuteman C39085-01 Leitfaden

Minuteman

Minuteman V14 PRO Bedienungsanleitung

Minuteman

Minuteman C29085-05 Stücklistenhandbuch

Minuteman

Minuteman X829 Asbestos Series Stücklistenhandbuch

Minuteman

Minuteman MPV-31 Stücklistenhandbuch

Minuteman

Minuteman Gotcha C46200-00 Bedienungsanleitung

Minuteman

Minuteman C82904-04 Leitfaden

Minuteman

Minuteman MC832085 Bedienungsanleitung

Minuteman

Minuteman C82940-00 Leitfaden

Minuteman

Minuteman MC827968 Bedienungsanleitung

Minuteman

Minuteman C82908-00 Leitfaden

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung