Miranda ADC-191p Bedienungsanleitung

ADC-191p

Video ADC

Guide to Installation

and Operation

M825-9800-100

Miranda Technologies Inc.

Specifications may be subject to change.

Printed in Canada

March 2007

ADC-191p

picoLink Series

Miranda

Technologies inc.

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. 514-333-1772

Fax. 514-333-9828

www.miranda.com

Guide to Installation and Operation

ADC-191p

Radio Frequency Interference and Immunity

This unit generates, uses, and can radiate radio

frequency energy. If the unit is not properly installed and

used in accordance with this guide, it may cause

interference with radio communications. Operation with

non-certified peripheral devices is likely to result in

interference with radio and television reception. This

equipment has been tested and complies with the limits

in accordance with the specifications in:

FCC Part 15, Subpart B

CE EN50081-1:1992

CE EN50082-1:1992.

CONTACT MIRANDA

For technical assistance, please contact the Miranda

Technical Support centre nearest you:

Americas

Telephone:

+1-800-224-7882

e-mail:

[email protected]

Asia

Telephone:

+81-3-5730-2987

e-mail:

[email protected]

Europe, Middle East, Africa, UK

Telephone:

+44 (0) 1491 820222

e-mail:

[email protected]

France (only)

Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at

www.miranda.com

Guide to Installation and Operation

ADC-191p

CONTENTS

page

1.0 ADC-191p.............................................. 1

1.1 Introduction....................................................1

1.2 Features........................................................1

2.0 Physical Layout.....................................2

3.0 Installation.............................................3

3.1 Power Supply................................................3

3.2 CAV Inputs ..................................................4

3.3 4:2:2 Output...................................................4

4.0 Operation...............................................5

4.1 Switch Settings..............................................5

4.2 Status LED....................................................6

5.0 Specifications........................................7

Guide to Installation and Operation

ADC-191p

Guide to Installation and Operation

ADC-191p | 1

1.0 ADC-191p

1.1 Introduction

The ADC-191p is the industry’s smallest component

analog video to 4:2:2 serial digital video ADC. This

product automatically detects 525-line and 625-line CAV

signals and provides a 4:2:2 serial digital output signal

conforming to the SMPTE 259M-C standard. Both

SMPTE/EBU and Betacam CAV sources are supported.

In addition, this feature-packed unit delivers ease-of-use,

a simplified design, easy installation and operation.

Figure 1: ADC-191p functional block diagram

1.2 Features

Automatic 525-line and 625-line format input

detection

Input standards supported: SMPTE/EBU and

Betacam

Time-base corrected and VTR-type sources

supported

Bi-color LED providing error status on input 4:2:2

signal

Very small packaging aluminum extruded body

B-Y

R-Y

COMPONENT IN

Parallel

to serial

ADC 4:2:2 OUT

Guide to Installation and Operation

2| ADC-191p

2.0 Physical Layout

Figure 2 illustrates the ADC-191p’s major parts and their

locations. SMPTE/EBU or Betacam sources are

connected to the CAV input BNCs and the 4:2:2 serial

digital output is provided by the 4:2:2 output BNC. Error

status is provided by the status LED and mode settings

are configured by two 3-position slide switches. Finally,

the power source is connected to the power connector.

Figure 2: Physical layout of the ADC-191p

4:2:2 output

Power connector

CAV inputs

Status LED

3-position slide switches

Guide to Installation and Operation

ADC-191p | 3

3.0 Installation

3.1 Power Supply

The power supplies LKS-WSA and LKS-WSE, for 110 V

and 220 V operation respectively, are used to power the

ADC-191p. Each power supply provides a regulated +5

VDC@750 mA power source. The ADC-191p employs a

mini XLR-3 connector for its power needs. Figure 3

provides a detailed pinout of the male connector.

(male connector-facing)

Pin 1: Shield

Pin 2: GND

Pin 3: +5 VDC

Figure 3: Power connector pinout

Guide to Installation and Operation

4| ADC-191p

3.2 CAV Inputs

The CAV inputs consist of green, blue, and red color

coded male BNC connectors. Male connectors are

provided so as to connect the ADC-191p directly to

source equipment. The supported CAV input standards

are SMPTE/EBU and Betacam. The Betacam standard

can be set with or without setup. The input Y/B-Y/R-Y

signals are to be connected to the green, blue, and red

BNCs respectively

Refer to section 4.0, Operation in order to select the

desired input CAV standard.

3.3 4:2:2 Output

The 4:2:2 serial digital output signal is provided by the

BNC labeled 4:2:2 OUT. The 4:2:2 output signal

conforms to the SMPTE 259M-C standard..

Guide to Installation and Operation

ADC-191p | 5

4.0 Operation

4.1 Switch Settings

Figure 4 shows the slide switch locations and functions.

Figure 4: ADC-191p switch settings

Input format switch (SW1)

SMPTE: For SMPTE/EBU CAV inputs, set SW1 to

this position. The Y/B-Y/R-Y inputs are to

be connected to the green, blue, and red

connectors respectively.

BETA 0: For BETA sources with 0 IRE setup, set

SW1 to this position.

BETA 7.5: For BETA sources with 7.5 IRE setup, set

SW1 to this position.

Input stability switch (SW2)

VTR: Set SW2 to VTR if the CAV inputs are VTR-

type or non-time based corrected signals.

Studio: For stable studio CAV sources, set SW2 to

this position.

Guide to Installation and Operation

6| ADC-191p

4.2 Status LED

The bi-colored status LED is provided to identify any

input errors. The following lists the possible situations.

Green: Indicates the ADC-191p is powered and has

detected a valid CAV input signal.

Red: Indicates an error with the input signal has

been detected or simply, there is no input

signal installed.

Inhaltsverzeichnis

Andere Miranda Medienkonverter Handbücher

Miranda

Miranda SDM-875p Bedienungsanleitung

Miranda

Miranda Quartet Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda Kaleido-Solo Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3811 Bedienungsanleitung

Miranda

Miranda Densite ENC-1103 Bedienungsanleitung

Miranda

Miranda FIO-1901-RR Bedienungsanleitung

Miranda

Miranda ASD-211i/2D Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda FIO-1901-RT Bedienungsanleitung

Miranda

Miranda XVP-3901 DENSITE series Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda ASD-231i Betriebsanleitung

Miranda

Miranda Kaleido-X (7RU) Bedienungsanleitung

Miranda

Miranda DVC-800 Bedienungsanleitung

Miranda

Miranda XVP-801i Betriebsanleitung

Miranda

Miranda DENSITE IRD-3802 Bedienungsanleitung

Miranda

Miranda Densite IRD-3111 Bedienungsanleitung

Miranda

Miranda EdgeVision Bedienungsanleitung

Miranda

Miranda picoLink FIO-991p Bedienungsanleitung

Miranda

Miranda ASI-Bridge CAM Bedienungsanleitung

Miranda

Miranda DENSITE series Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ASD-711i Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung