Miranda PicoLink FIO-991p Bedienungsanleitung

picoLink series

FIO-991p

Standalone 3Gbps/HD/SD/MADI SDI

optical-to-electrical

/ electrical-to-optical converter

Guide to Installation and Operation

M947-9900-101

31 Jan 2013

Miranda Technologies

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. 514-333-1772

Fax. 514-333-9828

www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Contact Miranda

For technical assistance, please contact the Miranda Technical

Support centre nearest you:

Americas

Telephone:

+1-800-224-7882

e-mail:

support@miranda.com

Asia

Telephone:

+852-2539-6987

e-mail:

asiatech@miranda.com

Europe, Middle East, Africa, UK

Telephone:

+44 1189 523444

e-mail:

eurotech@miranda.com

China

Telephone:

+86-10-5873-1814

e-mail:

asiatech@miranda.com

France (only)

Telephone:

+33 (0) 1 55 86 87 88

e-mail:

eurotech@miranda.com

Visit our web site at www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Radio Frequency Interference and Immunity

This equipment has been tested for verification of compliance with

FCC Part 15, Subpart B requirements for Class A digital devices.

NOTE: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

This equipment has been tested and found to comply with the

requirements of the EMC directive 2004/108/CE:

•EN 55022 Conducted emissions, Class A

•EN 55022 Radiated emissions, Class A

•EN 61000-4-2 Electrostatic discharge immunity

•EN 61000-4-3 Radiated electromagnetic field immunity - RF

•EN 61000-4-8 Power frequency magnetic field immunity

•EN 61000-4-11 Voltage dips, short-interruption and voltage

variation immunity

•ENV50204 Radiated EMF immunity – RF 900MHz pulsed

Power supplies:

pL-tray frame power supply

5VDC, 3.0A, I.T.E. external power supply

•CSA/UL 60950-1 for Information Technology Equipment

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Table of Contents

1FIO-991p Standalone 3G/HD/SD/MADI electrical/optical

converter.....................................................................................1

1.1 Introduction.................................................................................1

1.2 Features......................................................................................1

1.3 Product Overview........................................................................2

1.4 Product Variants .........................................................................2

FIO-991p-R-LC...............................................................................3

FIO-991p-RR-LC............................................................................3

FIO-991p-T-LC...............................................................................4

FIO-991p-TT-LC.............................................................................5

FIO-991p-RT-LC ............................................................................7

FIO-991p-RD-LC............................................................................8

FIO-991p-MADI-RT-M13-LC..........................................................9

2Installation..........................................................................11

2.1 Power Supply............................................................................11

2.2 Power Adapter..........................................................................11

2.3 Installation in the pL Tray..........................................................11

2.4 Fiber Optic Interface .................................................................12

2.5 3G/HD/SD Digital Video and MADI Digital Audio Connections.14

3Operation............................................................................15

3.1 Status LED assignments...........................................................15

3.2Status LED behavior.................................................................15

4Specifications ....................................................................16

GUIDE TO INSTALLATION AND OPERATION

FIO-991p | 1

1 FIO-991p Standalone 3G/HD/SD/MADI electrical/optical

converter

1.1 Introduction

The FIO-991p series are flexible serial digital video to/from fiber converters.

They are designed for SD, HD and 3G serial video as well as compressed

bit-streams (DVB-ASI) and MADI digital audio. The series supports any data

rate within the range of 19.4 Mbps to 2.97 Gbps and provides a reclocked

serial digital video from 270Mbps to 2.97 Gbps. The FIO-991p series offers

eight different main configurations: Single or dual channels Tx, single or dual

channels Rx, bi-directional Rx/Tx and an Rx/Tx repeater with electrical drop.

The series is based on hot-swappable SFP modules that provide easy

product maintenance and flexibility when multiple wavelengths are needed

(as for CWDM).

1.2 Features

•Convenient 3gbps/HD/SD and MADI standalone fiber interfaces

•Supports any serial data rate from 19.4 Mbps (ATSC) to 2.97Gbps

(3G SDI)

•Re-clocked serial digital video from 270Mbps to 2.97Gbps

•Provides unidirectional or bi-directional interface between serial

digital and fiber optics

•Single or Dual Tx, Single or Dual Rx or combined Rx/Tx

configurations

•Supports Multiple wavelength from the standard 1310 nm, 1550 nm

to multiple CWDM wavelengths

•Well integrated WDM (1310/1550) solution for dual Tx, Dual Rx and

Rx/Tx cards

•Ideal for long video run with “Hum” immunity

•Presence/loss of signal alarm

•Optical Power level out-of-range warning (receiver only)

•The SFP modules are fully hot swappable.

•Operation from 5 Volts DC.

GUIDE TO INSTALLATION AND OPERATION

2| FIO-991p

1.3 Product Overview

Figure 1 illustrates the FIO-991p's major parts and their locations. The SFP

module is inserted into the socket on the end of the FIO-991p chassis, and

the fiber is plugged into the SFP module. The 3G/HD/SD digital video inputs

and outputs appear on BNC connectors at the opposite end of the chassis.

Input status and SFP module status are provided by the status LEDs.

Finally, the power source is connected to the lockable power connector.

Figure 1: Overall view of the FIO-991p

1.4 Product Variants

The FIO-991p is available in eight different versions, based on the I/O

configuration. They are distinguished by the model designation on the label.

Within each version, some variations in functionality may be available by

selecting the SFP module.

Fiber SFP module

Power connector

I/O BNCs

Status LEDs

GUIDE TO INSTALLATION AND OPERATION

FIO-991p | 3

FIO-991p-R-LC

Single optical receiver, double 3G/HD/SD SDI output

FIO-991p-RR-LC

Dual optical receivers, dual 3G/HD/SD SDI outputs

FIO-991p-RR-LC (Dual Rx)

FIO-991p-R-LC (Single Rx)

Optical

FIBER Rx A

FIBER Rx B

3G/HD/SD

SDI OUT A

3G/HD/SD

SDI OUT B

Optical

FIBER Rx 3G/HD/SD

SDI OUT 1

3G/HD/SD

SDI OUT 2

GUIDE TO INSTALLATION AND OPERATION

4| FIO-991p

The WDM version receives two signals which are wave division multiplexed

onto a single fiber (one at 1310 nm and one at 1550 nm), and optically splits

them into the two receivers, each of which has an electrical output.

FIO-991p-T-LC

Single 3G/HD/SD SDI input with loop, single optical transmitter.

FIO-991p-T-S13-LC (Single Tx)

FIO-991p-RR-W-LC Dual Rx with WDM

Optical

3G/HD/SD

SDI IN FIBER Tx

LOOP

Optical

FIBER Rx A,B

WDM

3G/HD/SD

SDI OUT A

3G/HD/SD

SDI OUT B

GUIDE TO INSTALLATION AND OPERATION

FIO-991p | 5

FIO-991p-TT-LC

Dual 3G/HD/SD SDI inputs, dual optical transmitters.

The WDM version has optical transmitters at 1310 nm and 1550 nm, to allow

the two signals to be wave-division multiplexed onto a single fiber.

FIO-991p-TT-S13S13-LC (Dual Tx)

FIO-991p-TT-W13W15-LC (Dual Tx with WDM)

FIBER Tx A,B

WDM

3G/HD/SD

SDI IN A

3G/HD/SD

SDI IN B

Optical

(1310 nm)

Optical

(1550 nm)

FIBER Tx A

FIBER Tx B

3G/HD/SD

SDI IN A

3G/HD/SD

SDI IN B

Optical

GUIDE TO INSTALLATION AND OPERATION

6| FIO-991p

The CWDM version is designed to be used with an external optical

multiplexer, and is available with pairs of transmitters at the industry-

standard frequencies for this application.

The XX and YY values in the product designation identify the wavelengths.

Note that the clasp handle on the SFP transmitter module is color-coded to

identify its operating wavelengths.

XX YY Optical Signal

Wavelengths Clasp Color Code

27 29 1271 / 1291 nm Light Purple

31 33 1311 / 1331 nm Yellow Green

35 37 1351 / 1371 nm Pink

39 41 1391 / 1411 nm White

43 45 1431 / 1451 nm Black

47 49 1471 / 1491 nm Gray

51 53 1511 / 1531 nm Blue

55 57 1551 / 1571 nm

Yellow

59 61 1591 / 1611 nm Red

FIO-991p-TT-CXXCYY-LC (Dual Tx with CWDM)

FIO-991p-THTH-CXXCYY-LC (Dual High Power Tx with CWDM)

FIBER Tx A

FIBER Tx B

3G/HD/SD

SDI IN A

3G/HD/SD

SDI IN B

Optical

(1XX1 nm)

Optical

(1YY1 nm)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Miranda Medienkonverter Handbücher

Miranda

Miranda SDM-875p Bedienungsanleitung

Miranda

Miranda EC9535 Bedienungsanleitung

Miranda

Miranda Densite ENC-1103 Bedienungsanleitung

Miranda

Miranda XVP-801i Betriebsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda FIO-1901-RT Bedienungsanleitung

Miranda

Miranda ADC-191p Bedienungsanleitung

Miranda

Miranda DVC-800 Bedienungsanleitung

Miranda

Miranda Kaleido-Solo Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ASD-711i Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda ASD-771p Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Miranda

Miranda picoLink Series Bedienungsanleitung

Miranda

Miranda EdgeVision Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3811 Bedienungsanleitung

Miranda

Miranda Densite IRD-3111 Bedienungsanleitung

Miranda

Miranda DV-Bridge+ Bedienungsanleitung

Miranda

Miranda FIO-1901-RR Bedienungsanleitung

Miranda

Miranda SDM-771p Bedienungsanleitung

Miranda

Miranda Kaleido-X (7RU) Bedienungsanleitung

Miranda

Miranda DENSITE IRD-3101 Bedienungsanleitung

Miranda

Miranda KS-900 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung

Miranda picoLink FIO-991p Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken